Mass in grams of copper deposited by passing 9.6487 A current through a voltmeter containing copper sulphate for 100 seconds is:
(Given : Molar mass of Cu: \(63~ g mol^{-1}\); 1F = 96487 C)
1. 0.315 g  2. 31.5 g 
3. 0.0315 g  4. 3.15 g 
Subtopic:  Faraday’s Law of Electrolysis |
 68%
Level 2: 60%+
NEET - 2024
Hints

Match the redox conversions in List-I with the corresponding number of Faradays required in List-II.
List-I
(Redox Conversion)
List-II
(Number of Faraday required)
A. 1 mol of H2O to O2 I. 3F
B. 1 mol of \(MnO^-_4\) to \(Mn^{2+}\) II. 2F
C. 1.5 mol of \(Ca\) from molten \(CaCl_2\) III. 1F
D. 1 mol of FeO to Fe2O3 IV. 5F

Choose the correct answer from the options given below:
1. A - III, B - IV, C - I, D - II 2. A - II, B - III, C - I, D - IV
3. A - III, B - IV, C - II, D - I 4. A - II, B - IV, C - I, D - III
Subtopic:  Faraday’s Law of Electrolysis |
 66%
Level 2: 60%+
NEET - 2024
Hints

The molar conductance of a solution, given its conductivity (0.248 S m–1) and concentration (0.2 mol m–3) is:
1. 0.124 S cm2 mol–1 2. 1.24 S m2 mol–1
3. 124 S cm2 mol–1 4. 124 S m2 mol–1
Subtopic:  Conductance & Conductivity |
Level 3: 35%-60%
NEET - 2023
Hints

advertisementadvertisement

The molar conductance of an electrolyte increases with dilution according to the equation: 
\(\Lambda_{\mathrm{m}}=\Lambda_{\mathrm{m}}^{\circ}-\mathrm{A} \sqrt{\mathrm{c}} \)
Consider the following four statements:
A: This equation applies to both strong and weak electrolytes
B: The value of the constant A depends upon the nature of the solvent 
C: The value of constant A is the same for both \(BaCl_2\) and \(MgSO_4\)
D: The value of constant A is the same for both \(BaCl_2\) and \(Mg(OH)_2\)

Which of the above statements are correct? 
1. (A) and (B) only  2. (A), (B), and (C) only 
3. (B) and (C) only  4. (B) and (D) only 
Subtopic:  Conductance & Conductivity |
 58%
Level 3: 35%-60%
NEET - 2023
Hints

The standard electrode potential for Sn4+/Sn2+ couple is +0.15 V and that for the Cr3+/Cr couple is -0.74 V. These two couples in their standard state are connected to make a cell. The cell potential will be: 

1. +0.89 V 2. +0.18 V
3. +1.83 V 4. +1.199 V
Subtopic:  Electrode & Electrode Potential |
 91%
Level 1: 80%+
Hints
Links

A button cell used in watches functions as following
Zn(s) + Ag2O(s) + H2O(l) \(\rightleftharpoons\) 2Ag(s) + Zn2+(aq) + 2OH–(aq)
If half-cell potentials are-
Zn2+(aq) + 2e–→ Zn(s)  Eo = – 0.76 V 
Ag2O(s) + H2O(l) + 2e– →
2Ag(s) + 2OH–(aq)
Eo = 0.34 V

The cell potential will be:

1. 0.42 V 2. 0.84 V
3. 1.34 V 4. 1.10 V
Subtopic:  Electrode & Electrode Potential |
 87%
Level 1: 80%+
AIPMT - 2013
Hints
Links

advertisementadvertisement

Given the standard electrode potentials:

K+/K = –2.93 V
Ag+/Ag = 0.80 V
Hg2+/Hg = 0.79 V
Mg2+/Mg = –2.37 V
Cr3+/Cr = – 0.74 V
The correct increasing order of reducing power of the metals is:  
1. Cr < Mg < K < Ag < Hg 2. Mg < K < Ag < Hg < Cr
3. K < Ag < Hg < Cr < Mg 4. Ag < Hg < Cr < Mg < K
Subtopic:  Electrode & Electrode Potential |
 86%
Level 1: 80%+
Hints
Links

Molten sodium chloride conducts electricity due to the presence of: 

1. Free ions.

2. Free molecules.

3. Free electrons.

4. Atoms of sodium and chlorine.

Subtopic:  Electrode & Electrode Potential |
 80%
Level 1: 80%+
Hints

The metal that cannot be produced upon reduction of its oxide by aluminium is :

1. K 2. Mn
3. Cr 4. Fe
Subtopic:  Electrode & Electrode Potential |
 72%
Level 2: 60%+
Hints
Links

advertisementadvertisement

The difference between the electrode potentials of two electrodes when no current is drawn through the cell is called:
1. Cell potential.
2. Cell emf.
3. Potential difference.
4. Cell voltage.

Subtopic:  Electrode & Electrode Potential |
 64%
Level 2: 60%+
Hints