NCERT Ebook - Amines

Unit 13



After studying this Unit, you will be able to

describe amines as derivatives of ammonia having a pyramidal structure;

classify amines as primary, secondary and tertiary;

name amines by common names and IUPAC system;

describe some of the important methods of preparation of amines;

explain the properties of amines;

distinguish between primary, secondary and tertiary amines;

describe the method of prepara-tion of diazonium salts and their importance in the synthesis of a series of aromatic compounds including azo dyes.


“The chief commercial use of amines is as intermediates in the synthesis of medicines and fibres” .

 Amines constitute an important class of organic compounds derived by replacing one or more hydrogen atoms of ammonia molecule by alkyl/aryl group(s). In nature, they occur among proteins, vitamins, alkaloids and hormones. Synthetic examples include polymers, dye stuffs and drugs. Two biologically active compounds, namely adrenaline and ephedrine, both containing secondary amino group, are used to increase blood pressure. Novocain, a synthetic amino compound, is used as an anaesthetic in dentistry. Benadryl, a well known antihistaminic drug also contains tertiary amino group. Quaternary ammonium salts are used as surfactants. Diazonium salts are intermediates in the preparation of a variety of aromatic compounds including dyes. In this Unit, you will learn about amines and diazonium salts.

I. Amines

 Amines can be considered as derivatives of ammonia, obtained by replacement of one, two or all the three hydrogen atoms by alkyl and/or aryl groups.

For example:

13.1 Structure of Amines

Like ammonia, nitrogen atom of amines is trivalent and carries an unshared pair of electrons. Nitrogen orbitals in amines are therefore, sp3 hybridised and the geometry of amines is pyramidal. Each of the three sp3 hybridised orbitals of nitrogen overlap with orbitals of hydrogen or carbon depending upon the composition of the amines. The fourth orbital of nitrogen in all amines contains an unshared pair of electrons. Due to the presence of unshared pair of electrons, the angle C–N–E, (where E is C or H) is less than 109.5°; for instance, it is 108o in case of trimethylamine as shown in Fig. 13.1.

Fig. 13.1 Pyramidal shape of trimethylamine

13.2 Classification

 Amines are classified as primary (1o), secondary (2o) and tertiary (3o) depending upon the number of hydrogen atoms replaced by alkyl or aryl groups in ammonia molecule. If one hydrogen atom of ammonia is replaced by R or Ar , we get RNH2 or ArNH2, a primary amine (1o). If two hydrogen atoms of ammonia or one hydrogen atom of R-NH2 are replaced by another alkyl/aryl(R) group, what would you get? You get R-NHR’, secondary amine. The second alkyl/aryl group may be same or different. Replacement of another hydrogen atom by alkyl/aryl group leads to the formation of tertiary amine. Amines are said to be ‘simple’ when all the alkyl or aryl groups are the same, and ‘mixed’ when they are different.


13.3 Nomenclature

 In common system, an aliphatic amine is named by prefixing alkyl group to amine, i.e., alkylamine as one word (e.g., methylamine). In secondary and tertiary amines, when two or more groups are the same, the prefix di or tri is appended before the name of alkyl group. In IUPAC system, primary amines are named as alkanamines. The name is derived by replacement of ‘e’ of alkane by the word amine. For example, CH3NH2 is named as methanamine. In case, more than one amino group is present at different positions in the parent chain, their positions are specified by giving numbers to the carbon atoms bearing –NH2 groups and suitable prefix such as di, tri, etc. is attached to the amine. The letter ‘e’ of the suffix of the hydrocarbon part is retained. For example, H2N–CH2–CH2–NH2 is named as ethane-1, 2-diamine.

To name secondary and tertiary amines, we use locant N to designate substituent attached to a nitrogen atom. For example, CH3 NHCH2CH3 is named as N-methylethanamine and (CH3CH2)3N is named as N, N-diethylethanamine. More examples are given in Table 13.1.

 In arylamines, –NH2 group is directly attached to the benzene ring. C6H5NH2 is the simplest example of arylamine. In common system, it is known as aniline. It is also an accepted IUPAC name. While naming arylamines according to IUPAC system, suffix ‘e’ of arene is replaced by ‘amine’. Thus in IUPAC system, C6H5–NH2 is named as benzenamine. Common and IUPAC names of some alkylamines and arylamines are given in Table 13.1.




Intext Questions

13.1 Classify the following amines as primary, secondary or tertiary:



13.2 (i) Write structures of different isomeric amines corresponding to the molecular formula, C4H11N.

(ii) Write IUPAC names of all the isomers.


(iii) What type of isomerism is exhibited by different pairs of amines?

13.4 Preparation of Amines

Amines are prepared by the following methods:

1. Reduction of nitro compounds

 Nitro compounds are reduced to amines by passing hydrogen gas in the presence of finely divided nickel, palladium or platinum and also by reduction with metals in acidic medium. Nitroalkanes can also be similarly reduced to the corresponding alkanamines.

Reduction with iron scrap and hydrochloric acid is preferred because FeCl2 formed gets hydrolysed to release hydrochloric acid during the reaction. Thus, only a small amount of hydrochloric acid is required to initiate the reaction.

2. Ammonolysis of alkyl halides

 You have read (Unit 10, Class XII) that the carbon - halogen bond in alkyl or benzyl halides can be easily cleaved by a nucleophile. Hence, an alkyl or benzyl halide on reaction with an ethanolic solution of ammonia undergoes nucleophilic substitution reaction in which the halogen atom is replaced by an amino (–NH2) group. This process of cleavage of the C–X bond by ammonia molecule is known as ammonolysis. The reaction is carried out in a sealed tube at 373 K. The primary amine thus obtained behaves as a nucleophile and can further react with alkyl halide to form secondary and tertiary amines, and finally quaternary ammonium salt.


The free amine can be obtained from the ammonium salt by treatment with a strong base:

 Ammonolysis has the disadvantage of yielding a mixture of primary, secondary and tertiary amines and also a quaternary ammonium salt. However, primary amine is obtained as a major product by taking large excess of ammonia.

The order of reactivity of halides with amines is RI > RBr >RCl.

Example 13.1

  Write chemical equations for the following reactions:

(i) Reaction of ethanolic NH3 with C2H5Cl.

(ii) Ammonolysis of benzyl chloride and reaction of amine so formed with two moles of CH3Cl.




3. Reduction of nitriles

 Nitriles on reduction with lithium aluminium hydride (LiAlH4) or catalytic hydrogenation produce primary amines. This reaction is used for ascent of amine series, i.e., for preparation of amines containing one carbon atom more than the starting amine.

4. Reduction of amides

The amides on reduction with lithium aluminium hydride yield amines.

5. Gabriel phthalimide synthesis

 Gabriel synthesis is used for the preparation of primary amines. Phthalimide on treatment with ethanolic potassium hydroxide forms potassium salt of phthalimide which on heating with alkyl halide followed by alkaline hydrolysis produces the corresponding primary amine. Aromatic primary amines cannot be prepared by this method because aryl halides do not undergo nucleophilic substitution with the anion formed by phthalimide.


6. Hoffmann bromamide degradation reaction

 Hoffmann developed a method for preparation of primary amines by treating an amide with bromine in an aqueous or ethanolic solution of sodium hydroxide. In this degradation reaction, migration of an alkyl or aryl group takes place from carbonyl carbon of the amide to the nitrogen atom. The amine so formed contains one carbon less than that present in the amide.


Example 13.2

 Write chemical equations for the following conversions:

(i) CH3–CH2–Cl into CH3–CH2–CH2–NH2


(ii) C6H5–CH2–Cl into C6H5–CH2–CH2–NH2


Example 13.3

 Write structures and IUPAC names of

(i) the amide which gives propanamine by Hoffmann bromamide reaction.

(ii) the amine produced by the Hoffmann degradation of benzamide.


(i) Propanamine contains three carbons. Hence, the amide molecule must contain four carbon atoms. Structure and IUPAC name of the starting amide with four carbon atoms are given below:


(ii) Benzamide is an aromatic amide containing seven carbon atoms. Hence, the amine formed from benzamide is aromatic primary amine containing six carbon atoms.

 Aniline or benzenamine


Intext Question

13.3 How will you convert

(i) Benzene into aniline (ii) Benzene into N, N-dimethylaniline

(iii) Cl–(CH2)4–Cl into hexan-1,6-diamine?


13.5 Physical Properties

 The lower aliphatic amines are gases with fishy odour. Primary amines with three or more carbon atoms are liquid and still higher ones are solid. Aniline and other arylamines are usually colourless but get coloured on storage due to atmospheric oxidation.

Lower aliphatic amines are soluble in water because they can form hydrogen bonds with water molecules. However, solubility decreases with increase in molar mass of amines due to increase in size of the hydrophobic alkyl part. Higher amines are essentially insoluble in water. Considering the electronegativity of nitrogen of amine and oxygen of alcohol as 3.0 and 3.5 respectively, you can predict the pattern of solubility of amines and alcohols in water. Out of butan-1-ol and butan-1-amine, which will be more soluble in water and why? Amines are soluble in organic solvents like alcohol, ether and benzene. You may remember that alcohols are more polar than amines and form stronger intermolecular hydrogen bonds than amines.

Primary and secondary amines are engaged in intermolecular association due to hydrogen bonding between nitrogen of one and hydrogen of another molecule. This intermolecular association is more in primary amines than in secondary amines as there are two hydrogen atoms available for hydrogen bond formation in it. Tertiary amines do not have intermolecular association due to the absence of hydrogen atom available for hydrogen bond formation. Therefore, the order of boiling points of isomeric amines is as follows:

Primary > Secondary > Tertiary

 Intermolecular hydrogen bonding in primary amines is shown in Fig. 13.2.

Fig. 13.2 Intermolecular hydrogen bonding in primary amines



Boiling points of amines, alcohols and alkanes of almost the same molar mass are shown in Table 13.2.

 Table 13.2: Comparison of Boiling Points of Amines, Alcohols and Alkanes of Similar Molecular Masses



13.6 Chemical Reactions

 Difference in electronegativity between nitrogen and hydrogen atoms and the presence of unshared pair of electrons over the nitrogen atom makes amines reactive. The number of hydrogen atoms attached to nitrogen atom also decides the course of reaction of amines; that is why primary (–NH2), secondary and tertiary amines differ in many reactions. Moreover, amines behave as nucleophiles due to the presence of unshared electron pair. Some of the reactions of amines are described below:

1. Basic character of amines

Amines, being basic in nature, react with acids to form salts.

Amine salts on treatment with a base like NaOH, regenerate the parent amine.

 Amine salts are soluble in water but insoluble in organic solvents like ether. This reaction is the basis for the separation of amines from the non basic organic compounds insoluble in water.

The reaction of amines with mineral acids to form ammonium salts shows that these are basic in nature. Amines have an unshared pair of electrons on nitrogen atom due to which they behave as Lewis base. Basic character of amines can be better understood in terms of their Kb and pkb values as explained below:

K =


or =

pKb = –log Kb

Larger the value of Kb or smaller the value of pKb, stronger is the base. The pKb values of few amines are given in Table 13.3.

pKb value of ammonia is 4.75. Aliphatic amines are stronger bases than ammonia due to +I effect of alkyl groups leading to high electron density on the nitrogen atom. Their pKb values lie in the range of 3 to 4.22. On the other hand, aromatic amines are weaker bases than ammonia due to the electron withdrawing nature of the aryl group.

 Table 13.3: pKb Values of Amines in Aqueous Phase



You may find some discrepancies while trying to interpret the kb values of amines on the basis of +I or –I effect of the substituents present in amines. Besides inductive effect, there are other effects like solvation effect, steric hinderance, etc., which affect the basic strength of amines. Just ponder over. You may get the answer in the following paragraphs.

Structure-basicity relationship of amines

 Basicity of amines is related to their structure. Basic character of an amine depends upon the ease of formation of the cation by accepting a proton from the acid. The more stable the cation is relative to the amine, more basic is the amine.

(a) Alkanamines versus ammonia

Let us consider the reaction of an alkanamine and ammonia with a proton to compare their basicity.

Due to the electron releasing nature of alkyl group, it (R) pushes electrons towards nitrogen and thus makes the unshared electron pair more available for sharing with the proton of the acid. Moreover, the substituted ammonium ion formed from the amine gets stabilised due to dispersal of the positive charge by the +I effect of the alkyl group. Hence, alkylamines are stronger bases than ammonia. Thus, the basic nature of aliphatic amines should increase with increase in the number of alkyl groups. This trend is followed in the gaseous phase. The order of basicity of amines in the gaseous phase follows the expected order: tertiary amine > secondary amine > primary amine > NH3. The trend is not regular in the aqueous state as evident by their pKb values given in Table 13.3. In the aqueous phase, the substituted ammonium cations get stabilised not only by electron releasing effect of the alkyl group (+I) but also by solvation with water molecules. The greater the size of the ion, lesser will be the solvation and the less stabilised is the ion. The order of stability of ions are as follows:


Decreasing order of extent of H-bonding in water and order of stability of ions by solvation.

 Greater is the stability of the substituted ammonium cation, stronger should be the corresponding amine as a base. Thus, the order of basicity of aliphatic amines should be: primary > secondary > tertiary, which is opposite to the inductive effect based order. Secondly, when the alkyl group is small, like –CH3 group, there is no steric hindrance to  H-bonding. In case the alkyl group is bigger than CH3 group, there will be steric hinderance to H-bonding. Therefore, the change of nature of the alkyl group, e.g., from –CH3 to –C2H5 results in change of the order of basic strength. Thus, there is a subtle interplay of the inductive effect, solvation effect and steric hinderance of the alkyl group which decides the basic strength of alkyl amines in the aqueous state. The order of basic strength in case of methyl substituted amines and ethyl substituted amines in aqueous solution is as follows:

(C2H5)2NH > (C2H5)3N > C2H5NH2 > NH3

(CH3)2NH > CH3NH2 > (CH3)3N > NH3

(b) Arylamines versus ammonia

 pKb value of aniline is quite high. Why is it so? It is because in aniline or other arylamines, the -NH2 group is attached directly to the benzene ring. It results in the unshared electron pair on nitrogen atom to be in conjugation with the benzene ring and thus making it less available for protonation. If you write different resonating structures of aniline, you will find that aniline is a resonance hybrid of the following five structures.

On the other hand, anilinium ion obtained by accepting a proton can have only two resonating structures (kekule).

We know that greater the number of resonating structures, greater is the stability. Thus you can infer that aniline (five resonating structures) is more stable than anilinium ion. Hence, the proton acceptability or the basic nature of aniline or other aromatic amines would be less than that of ammonia. In case of substituted aniline, it is observed that electron releasing groups like –OCH3, –CH3 increase basic strength whereas electron withdrawing groups like –NO2, –SO3H, –COOH, –X decrease it.

Example 13.4

 Arrange the following in decreasing order of their basic strength:

C6H5NH2, C2H5NH2, (C2H5)2NH, NH3


The decreasing order of basic strength of the above amines and ammonia follows the following order:

(C2H5)2NH > C2H5NH2 > NH3 > C6H5NH2


2. Alkylation

Amines undergo alkylation on reaction with alkyl halides (refer Unit 10, Class XII).

3. Acylation

 Aliphatic and aromatic primary and secondary amines react with acid chlorides, anhydrides and esters by nucleophilic substitution reaction. This reaction is known as acylation. You can consider this reaction as the replacement of hydrogen atom of –NH2 or >N–H group by the acyl group. The products obtained by acylation reaction are known as amides. The reaction is carried out in the presence of a base stronger than the amine, like pyridine, which removes HCl so formed and shifts the equilibrium to the right hand side.

Amines also react with benzoyl chloride (C6H5COCl). This reaction is known as benzoylation.

What do you think is the product of the reaction of amines with carboxylic acids ? They form salts with amines at room temperature.

4. Carbylamine reaction

 Aliphatic and aromatic primary amines on heating with chloroform and ethanolic potassium hydroxide form isocyanides or carbylamines which are foul smelling substances. Secondary and tertiary amines do not show this reaction. This reaction is known as carbylamine reaction or isocyanide test and is used as a test for primary amines.

5. Reaction with nitrous acid

 Three classes of amines react differently with nitrous acid which is prepared in situ from a mineral acid and sodium nitrite.

(a) Primary aliphatic amines react with nitrous acid to form aliphatic diazonium salts which being unstable, liberate nitrogen gas quantitatively and alcohols. Quantitative evolution of nitrogen is used in estimation of amino acids and proteins.


(b) Aromatic amines react with nitrous acid at low temperatures (273-278 K) to form diazonium salts, a very important class of compounds used for synthesis of a variety of aromatic compounds discussed in Section 13.7.

Secondary and tertiary amines react with nitrous acid in a  different manner.

6. Reaction with arylsulphonyl chloride

 Benzenesulphonyl chloride (C6H5SO2Cl), which is also known as Hinsberg’s reagent, reacts with primary and secondary amines to form sulphonamides.

(a) The reaction of benzenesulphonyl chloride with primary amine yields N-ethylbenzenesulphonyl amide.


The hydrogen attached to nitrogen in sulphonamide is strongly acidic due to the presence of strong electron withdrawing sulphonyl group. Hence, it is soluble in alkali.

(b) In the reaction with secondary amine, N,N-diethyl-benzenesulphonamide is formed.

Since N, N-diethylbenzene sulphonamide does not contain any hydrogen atom attached to nitrogen atom, it is not acidic and hence insoluble in alkali.

(c) Tertiary amines do not react with benzenesulphonyl chloride. This property of amines reacting with benzenesulphonyl chloride in a different manner is used for the distinction of primary, secondary and tertiary amines and also for the separation of a mixture of amines. However, these days benzenesulphonyl chloride is replaced by p-toluenesulphonyl chloride.

7. Electrophilic substitution

 You have read earlier that aniline is a resonance hybrid of five structures. Where do you find the maximum electron density in these structures? Ortho- and para-positions to the –NH2 group become centres of high electron density. Thus –NH2 group is ortho and para directing and a powerful activating group.

(a) Bromination: Aniline reacts with bromine water at room temperature to give a white precipitate of 2,4,6-tribromoaniline.


The main problem encountered during electrophilic substitution reactions of aromatic amines is that of their very high reactivity. Substitution tends to occur at ortho- and para-positions. If we have to prepare monosubstituted aniline derivative, how can the activating effect of –NH2 group be controlled ? This can be done by protecting the -NH2 group by acetylation with acetic anhydride, then carrying out the desired substitution followed by hydrolysis of the substituted amide to the substituted amine.


The lone pair of electrons on nitrogen of acetanilide interacts with oxygen atom due to resonance as shown below:

Hence, the lone pair of electrons on nitrogen is less available for donation to benzene ring by resonance. Therefore, activating effect of –NHCOCH3 group is less than that of amino group.

(b)  Nitration: Direct nitration of aniline yields tarry oxidation products in addition to the nitro derivatives. Moreover, in the strongly acidic medium, aniline is protonated to form the anilinium ion which is meta directing. That is why besides the ortho and para derivatives, significant amount of meta derivative is also formed.

However, by protecting the –NH2 group by acetylation reaction with acetic anhydride, the nitration reaction can be controlled and the p-nitro derivative can be obtained as the major product.



(c)  Sulphonation: Aniline reacts with concentrated sulphuric acid to form anilinium hydrogensulphate which on heating with sulphuric acid at 453-473K produces p-aminobenzene sulphonic acid, commonly known as sulphanilic acid, as the major product.


Aniline does not undergo Friedel-Crafts reaction (alkylation and acetylation) due to salt formation with aluminium chloride, the Lewis acid, which is used as a catalyst. Due to this, nitrogen of aniline acquires positive charge and hence acts as a strong deactivating group for further reaction.

Intext Questions

13.4  Arrange the following in increasing order of their basic strength:

(i) C2H5NH2, C6H5NH2, NH3, C6H5CH2NH2 and (C2H5)2NH

(ii) C2H5NH2, (C2H5)2NH, (C2H5)3N, C6H5NH2

(iii) CH3NH2, (CH3)2NH, (CH3)3N, C6H5NH2, C6H5CH2NH2.

13.5  Complete the following acid-base reactions and name the products:

(i) CH3CH2CH2NH2 + HCl → (ii) (C2H5)3N + HCl →

13.6 Write reactions of the final alkylation product of aniline with excess of methyl iodide in the presence of sodium carbonate solution. 

13.7 Write chemical reaction of aniline with benzoyl chloride and write the name of the product obtained.


13.8 Write structures of different isomers corresponding to the molecular formula, C3H9N. Write IUPAC names of the isomers which will liberate nitrogen gas on treatment with nitrous acid.


II. Diazonium Salts

 The diazonium salts have the general formula where R stands for an aryl group and ion may be Cl Br, , , etc. They are named by suffixing diazonium to the name of the parent hydrocarbon from which they are formed, followed by the name of anion such as chloride, hydrogensulphate, etc. The group is called diazonium group. For example, is named as benzenediazonium chloride and C6H5N2+HSO4 is known as benzenediazonium hydrogensulphate.

Primary aliphatic amines form highly unstable alkyldiazonium salts (refer to Section 13.6). Primary aromatic amines form arenediazonium salts which are stable for a short time in solution at low temperatures (273-278 K). The stability of arenediazonium ion is explained on the basis of resonance.


13.7 Method of Preparation of Diazoniun Salts

 Benzenediazonium chloride is prepared by the reaction of aniline with nitrous acid at 273-278K. Nitrous acid is produced in the reaction mixture by the reaction of sodium nitrite with hydrochloric acid. The conversion of primary aromatic amines into diazonium salts is known as diazotisation. Due to its instability, the diazonium salt is not generally stored and is used immediately after its preparation.


13.8 Physical Properties

 Benzenediazonium chloride is a colourless crystalline solid. It is readily soluble in water and is stable in cold but reacts with water when warmed. It decomposes easily in the dry state. Benzenediazonium fluoroborate is water insoluble and stable at room temperature.

13.9 Chemical Reactions

The reactions of diazonium salts can be broadly divided into two categories, namely (A) reactions involving displacement of nitrogen and (B) reactions involving retention of diazo group.

A. Reactions involving displacement of nitrogen

Diazonium group being a very good leaving group, is substituted by other groups such as Cl, Br, I, CN and OH which displace nitrogen from the aromatic ring. The nitrogen formed escapes from the reaction mixture as a gas.

1. Replacement by halide or cyanide ion: The Cl, Br and CN nucleophiles can easily be introduced in the benzene ring in the presence of Cu(I) ion. This reaction is called Sandmeyer reaction.



Alternatively, chlorine or bromine can also be introduced in the benzene ring by treating the diazonium salt solution with corresponding halogen acid in the presence of copper powder. This is referred as Gatterman reaction.

The yield in Sandmeyer reaction is found to be better than Gattermann reaction.

2. Replacement by iodide ion: Iodine is not easily introduced into the benzene ring directly, but, when the diazonium salt solution is treated with potassium iodide, iodobenzene is formed.

3. Replacement by fluoride ion: When arenediazonium chloride is treated with fluoroboric acid, arene diazonium fluoroborate is precipitated which on heating decomposes to yield aryl fluoride.


4. Replacement by H: Certain mild reducing agents like hypophosphorous acid (phosphinic acid) or ethanol reduce diazonium salts to arenes and themselves get oxidised to phosphorous acid and ethanal, respectively.

5. Replacement by hydroxyl group: If the temperature of the diazonium salt solution is allowed to rise upto 283 K, the salt gets hydrolysed to phenol.


6. Replacement by –NO2 group: When diazonium fluoroborate is heated with aqueous sodium nitrite solution in the presence of copper, the diazonium group is replaced by –NO2 group.




B. Reactions involving retention of diazo group coupling reactions

The azo products obtained have an extended conjugate system having both the aromatic rings joined through the –N=N– bond. These compounds are often coloured and are used as dyes. Benzene diazonium chloride reacts with phenol in which the phenol molecule at its para position is coupled with the diazonium salt to form p-hydroxyazobenzene. This type of reaction is known as coupling reaction. Similarly the reaction of diazonium salt with aniline yields p-aminoazobenzene. This is an example of electrophilic substitution reaction.




13.10 Importance of Diazonium Salts in Synthesis of Aromatic Compounds

From the above reactions, it is clear that the diazonium salts are very good intermediates for the introduction of –F, –Cl, –Br, –I, –CN, –OH, –NO2 groups into the aromatic ring.

Aryl fluorides and iodides cannot be prepared by direct halogenation. The cyano group cannot be introduced by nucleophilic substitution of chlorine in chlorobenzene but cyanobenzene can be easily obtained from diazonium salt.

Thus, the replacement of diazo group by other groups is helpful in preparing those substituted aromatic compounds which cannot be prepared by direct substitution in benzene or substituted benzene.


Example 13.5


Intext Question


(i) 3-Methylaniline into 3-nitrotoluene.
(ii) Aniline into 1,3,5 - tribromobenzene.



Amines are usually formed from nitro compounds, halides, amides, imides, etc. They exhibit hydrogen bonding which influence their physical properties. In alkylamines, a combination of electron releasing, steric and H-bonding factors influence the stability of the substituted ammonium cations in protic polar solvents and thus affect the basic nature of amines. Alkyl amines are found to be stronger bases than ammonia. In aromatic amines, electron releasing and withdrawing groups, respectively increase and decrease their basic character. Aniline is a weaker base than ammonia. Reactions of amines are governed by availability of the unshared pair of electrons on nitrogen. Influence of the number of hydrogen atoms at nitrogen atom on the type of reactions and nature of products is responsible for identification and distinction between primary, secondary and tertiary amines. p-Toluenesulphonyl chloride is used for the identification of primary, secondary and tertiary amines. Presence of amino group in aromatic ring enhances reactivity of the aromatic amines. Reactivity of aromatic amines can be controlled by acylation process, i.e., by treating with acetyl chloride or acetic anhydride. Tertiary amines like trimethylamine are used as insect attractants.

Aryldiazonium salts, usually obtained from arylamines, undergo replacement of the diazonium group with a variety of nucleophiles to provide advantageous methods for producing aryl halides, cyanides, phenols and arenes by reductive removal of the diazo group. Coupling reaction of aryldiazonium salts with phenols or arylamines give rise to the formation of azo dyes.




13.1 Write IUPAC names of the following compounds and classify them into primary, secondary and tertiary amines.

(i) (CH3)2CHNH2 (ii) CH3(CH2)2NH2 (iii) CH3NHCH(CH3)2

(iv) (CH3)3CNH2 (v) C6H5NHCH3 (vi) (CH3CH2)2NCH3

(vii) m–BrC6H4NH2

NEETprep Answer

(i) Methylamine and dimethylamine (ii) Secondary and tertiary amines

(iii) Ethylamine and aniline (iv) Aniline and benzylamine

(v) Aniline and N-methylaniline.

NEETprep Answer

(i) pKb of aniline is more than that of methylamine.

(ii) Ethylamine is soluble in water whereas aniline is not.

(iii) Methylamine in water reacts with ferric chloride to precipitate hydrated ferric oxide.

(iv) Although amino group is o– and p– directing in aromatic electrophilic substitution reactions, aniline on nitration gives a substantial amount of m-nitroaniline.

(v) Aniline does not undergo Friedel-Crafts reaction.

(vi) Diazonium salts of aromatic amines are more stable than those of aliphatic amines.

(vii) Gabriel phthalimide synthesis is preferred for synthesising primary amines.

NEETprep Answer

13.4 Arrange the following:

(i) In decreasing order of the pKb values:

C2H5NH2, C6H5NHCH3, (C2H5)2NH and C6H5NH2

(ii) In increasing order of basic strength:

C6H5NH2, C6H5N(CH3)2, (C2H5)2NH and CH3NH2

(iii) In increasing order of basic strength:

(a) Aniline, p-nitroaniline and p-toluidine

(b) C6H5NH2, C6H5NHCH3, C6H5CH2NH2.

(iv) In decreasing order of basic strength in gas phase:

C2H5NH2, (C2H5)2NH, (C2H5)3N and NH3

(v) In increasing order of boiling point:

C2H5OH, (CH3)2NH, C2H5NH2

(vi) In increasing order of solubility in water:

C6H5NH2, (C2H5)2NH, C2H5NH2.

NEETprep Answer

(i) Ethanoic acid into methanamine

(ii) Hexanenitrile into 1-aminopentane

(iii) Methanol to ethanoic acid

(iv) Ethanamine into methanamine

(v) Ethanoic acid into propanoic acid

(vi) Methanamine into ethanamine

(vii) Nitromethane into dimethylamine

(viii) Propanoic acid into ethanoic acid?

NEETprep Answer

13.6 Describe a method for the identification of primary, secondary and tertiary amines. Also write chemical equations of the reactions involved.

NEETprep Answer

13.7 Write short notes on the following:

(i) Carbylamine reaction (ii) Diazotisation

(iii) Hofmann’s bromamide reaction (iv) Coupling reaction

(v) Ammonolysis (vi) Acetylation

(vii) Gabriel phthalimide synthesis.

NEETprep Answer

13.8  Accomplish the following conversions:

(i) Nitrobenzene to benzoic acid

(ii) Benzene to m-bromophenol

(iii) Benzoic acid to aniline

(iv) Aniline to 2,4,6-tribromofluorobenzene

(v) Benzyl chloride to 2-phenylethanamine

(vi) Chlorobenzene to p-chloroaniline

(vii) Aniline to p-bromoaniline

(viii) Benzamide to toluene

(ix) Aniline to benzyl alcohol.

NEETprep Answer

13.9  Give the structures of A, B and C in the following reactions:







NEETprep Answer

13.10 An aromatic compound ‘A’ on treatment with aqueous ammonia and heating forms compound ‘B’ which on heating with Br2 and KOH forms a compound ‘C’ of molecular formula C6H7N. Write the structures and IUPAC names of compounds A, B and C.

NEETprep Answer

13.11  Complete the following reactions:








NEETprep Answer

13.12 Why cannot aromatic primary amines be prepared by Gabriel phthalimide synthesis?

NEETprep Answer

13.13 Write the reactions of (i) aromatic and (ii) aliphatic primary amines with nitrous acid.

NEETprep Answer

13.14  Give plausible explanation for each of the following:

(i) Why are amines less acidic than alcohols of comparable molecular masses?

(ii) Why do primary amines have higher boiling point than tertiary amines?

(iii) Why are aliphatic amines stronger bases than aromatic amines?

NEETprep Answer

Q. 1 Which of the following is a 3° amine?

(a) 1-methylcyclohexylamine

(b) Triethylamine

(c) tert-butylamine

(d) N-methylaniline

NEETprep Answer


Q. 2 The correct IUPAC name for CH2 = CHCH2NHCH3 is

(a) allyl methylamine

(b) 2-amino-4-pentene 

(c) 4-aminopent-l ene

(d) N-rnethylprop-2-en-1 -amine  

NEETprep Answer


Q.3 Amongst the following, the strongest base in aqueous medium is ..........

a. CH3NH2b. NCCH2NH2c. (CH3)2NHd. C6H5NHCH3

NEETprep Answer


Q. 4 Which of the following is the weakest Bronsted base?

NEETprep Answer


Q. 5 Benzylamine may be alkylated as shown in the following equation?


Which of the following alkyl halides is best suited for this reaction through SN1 mechanism?

a. CH3Brb. C6H5Brc. C6H5CH2Brd. C2H5Br

NEETprep Answer


Q. 6 Which of the following reagents would not be a good choice for reducing an aryl nitro compound to an amine?

(a) H2(excess) / Pt

(b) LiAlH4 in ether

(c) Fe and HCI

(d) Sn and HCI

NEETprep Answer


Q. 7 In order to prepare a 1o amine from an alkyl halide with simultaneous addition of one CH2 group in the carbon chain, the reagent used as source of nitrogen is ..... .....

(a) sodium amide, NaNH2

(b) sodium uzide, NaN3

(c) potassium cyanide, KCN

(d) potassium phthalimide C6H4(CO)2 NK+

NEETprep Answer


Q. 8 The source of nitrogen in Gabriel synthesis of amines is

(a) sodium amide, NaN3

(b) sodium uzide, NaNO2

(c) potassium cyanide, KCN

(d) potassium phthalimide C6H4(CO)2 NK+

NEETprep Answer


Q. 9 Amongst the given set of reactants, the most appropriate for preparing 2o amine is ...............

(a) 2o  R - Br + NH3
(b) 2oR — Br + NaCN followed by H2/Pt
(c) 1o R — NH2 + RCHO followed by H2/Pt
(d) 1o R — Br(2 mol) + potassium phthalimide followed by H3O+/ heat

NEETprep Answer


Q.10 The best reagent for converting 2-phenylpropanamide into 2-phenylpropanamine is

(a) excess H2
(b) Br2 in aqueous NaOH
(c) Iodine in the presence of phosphorus
(d) LiAlH4 in ether

NEETprep Answer

Q. 11 The best reagent for converting, 2-phenylpropanamide into 1-phenylethanamine is .... ....

(a) excess H2 / Pt
(b) NaOH / Bra
(c) NaBH4 / methanol
(d) LiAlH4 / ether

NEETprep Answer


Q.12 Hofmann bromamide degradation reaction is shown by ...............

a. ArNH2b. ArCONH2c. ArNO2b. ArCH2NH2

NEETprep Answer


Q. 13 The correct increasing order of basic strength for the following compounds is .............

NEETprep Answer


Q. 14 Methylamine reacts with HN02 to form .............


NEETprep Answer


Q.15 The gas evolved when methylamine reacts with nitrous acid is .............

a. NH3    b. N2c. H2       d. C2H6

NEETprep Answer


Q.16 In the nitration of benzene using a mixture of conc. H2SO4 and conc. HNO3, the species which initiates the reaction is ..........

(aNO2(b) NO+(cNO2+(d)NO2-

NEETprep Answer


Q. 17 Reduction of aromatic nitro compounds using Fe and I-ICI gives

(a) aromatic oxime
(b) aromatic hydrocarbon
(c) aromatic primary alliine
(d) aromatic amide

NEETprep Answer


Q.18 The most reactive amine towards dilute hydrochloric acid is .........

NEETprep Answer


Q. 19 Acid anhydrides on reaction with primary amines give

(a) amide
(b) imide
(c) secondary amine
(d) imine

NEETprep Answer


Q. 20 The reaction ArN+2ClCu/HCl_ArCl+N2+CuCl is named as .......,..

(a) Sandrneyer reaction
(b) Gattermann reaction
(c) Claisen reaction
(d) Carbylamine reaction

NEETprep Answer

Q.21 Best method for preparing primary amines from alkyl halides without changing the number of carbon atoms in the chain is

(a) Hofmann bromamide reaction

(b) Gabriel phthalimide synthesis

(c) Sandmeyer reaction

(d) reaction with NH3

NEETprep Answer


Q. 22 Which of the following compound will not undergo azo coupling reaction with benzene diazonium chloride?

(a) Aniline

(b) Phenol

(c) Anisole

(d) Nitrobenzene

NEETprep Answer


Q.23 Which of the following compounds is the weakest Bronsted base?

NEETprep Answer


Q.24 Among the following amines, the strongest Bronsted base is ..........

NEETprep Answer


Q.25 The correct decreasing order of basic strength of the following species is .............. H2O,NH3,OH,NH2

a. NH2>OH>NH3>H2Oc. NH3>H2O>NH2>OH     b. OH>NH2>H2O>NH3d. H2O>NH3>OH>NH2

NEETprep Answer


Q.26 Which of the following should be most volatile?

NEETprep Answer


Q.27 Which of the following methods of preparation of amines will give the same number of carbon atoms in the chain of amines as in the reactant?

(a) Reaction of nitrite with LiAlH4
(b) Reaction Of amide with LiAlH4 followed by treatment with water
(c) Heating alkyl halide with potassium salt of phthalimide followed by hydrolysis
(d) Treatment of amide with bromine in an aqueous solution of sodium hydroxide.

NEETprep Answer


Q. 28 Which of the following cannot be prepared by Sandmeyeds reaction?

(a) Chlorobenzene

(b) BromoEmzene

(c) Iodobenzene 

(d) Fluorobenzene

NEETprep Answer


Q.29 Reduction of nitrobenzene by which of the following reagent gives aniline?

(a) Sn/HCl
(b) Fe/HCl
(c) H2-pd
(d) Sn/NH4OH

NEETprep Answer


Q.30 Which of the following species are involved in the carbylamine test?

(a) R—NC
(b) CHCl3
(c) COCl2
(d) NaNO2 + HCl

NEETprep Answer

Q. 31 The reagents that can be used to convert benzene diazonium chloride to benzene are

(a) snCl2 / HCI
(b) CH3CH2OH
(c) H3PO2
(d) LiAlH4

NEETprep Answer


Q.32 The product of the following reaction is ............

NEETprep Answer


Q.33 Arenium ion involved in the bromination of aniline is ................

NEETprep Answer


Q. 34 Which of the following amines can be prepared by Gabriel synthesis?

(a) Isobutyl amine

(b) 2-phenylethylamine

(c) N-methyl benzylamine

(d) Aniline

NEETprep Answer


Q.35 Which of the following reactions are correct?

NEETprep Answer


Q.36 Under which of the following reaction conditions, aniline gives p-nitro derivative as the major product?

(a) Acetyl chloride/pyridine followed by reaction with conc. H2SO4 + conc.HNO3
(b) Acetic anhydride/pyridine followed by conc. H2SO4 + conc. HNO3
(c) Dil. HCI followed by reaction with conc. H2SO4 + conc. HNO3
(d) Reaction with conc. HNO3 + conc. H2SO4

NEETprep Answer


Q.37 Which of the following reactions belong to electrophilic aromatic substitution?

(a) Bromination of acetanilide
(b) Coupling reaction of aryldiazonium salts
(c) Diazotisation of aniline
(d) Acylation of aniline

NEETprep Answer


Q.38 What is the role of HNO3 in the nitrating mixture used for the nitration of benzene?

NEETprep Answer


Q. 39 Why is the NH3 group of aniline acetylated before carrying out nitration?

NEETprep Answer


Q. 40 What is the product when C6H5CH2NH2 reacts with HNO2?

NEETprep Answer

Q.41 What is the best reagent to convert nitrile to primary amine?

NEETprep Answer


Q.42 Give the structure of 'A' in the following reaction.

NEETprep Answer


Q.43 What is Hinsberg reagent?

NEETprep Answer


Q.44 Why is benzene diazonium chloride not stored and is used immediately after its preparation?

NEETprep Answer


Q.45 Why does acylation of —NH2 group of aniline reduces its activating effect?

NEETprep Answer


Q.46 Explain why MeNH2 is a stronger base than MeOH?

NEETprep Answer


Q.47 What is the role of pyridine in the acylation reaction of amines?

NEETprep Answer


Q. 48 Under what reaction condition (acidic, basic) the coupling reaction of aryl diazonium chloride with aniline is carried out?

NEETprep Answer


Q.49 Predict the product of the reaction of aniline with bromine in a non-polar solvent such as CS2.

NEETprep Answer


Q.50 Arrange the following compounds in increasing order of dipole moment.


NEETprep Answer

Q. 51 What is the structure and IUPAC name of the compound, allylamine?

NEETprep Answer



Q.52 Write down the IUPAC name of

NEETprep Answer



Q.53 A compound Z with molecular formula C3H9N reacts with C6H5SO2Cl to give solid, insoluble in alkali. Identify Z.

NEETprep Answer



Q.54 A primary amine, RNH2 can be reacted with CH3—X to get secondary amine, R—NHCH3 but the only disadvantage is that 3o amine and quaternary ammonium salts are also obtained as side products. Can you suggest a method where RNH2 forms only 2o amines?

NEETprep Answer



Q.55 Complete the following reaction.

NEETprep Answer


Q. 56 Why is aniline soluble in aqueous HCI?

NEETprep Answer



Q.57 Suggest a route by which the following conversion can be accomplished.

NEETprep Answer



Q.58 Identify A and B in the following reaction.

NEETprep Answer



Q.59 How will you carry out the following conversions?

(i) Toluene -> p-toluidine

(ii) p-toluidine diazonium chloride -> p-toluic acid

NEETprep Answer



Q.60 Write the following conversions

(i) Nitrobenzene Acetanilide
(ii) Acetanilide p-nitroaniline

NEETprep Answer

Q.61 A solution contains 1 g mol. each of p-toluene diazonium chloride and p-nitrophenyl diazonium chloride. To this 1 g mol. of an alkaline solution of phenol is added. Predict the major product. Explain your answer.

NEETprep Answer


Q.62 How will you bling out the following conversion?

NEETprep Answer


Q.63 How will you carry out the following conversion?

NEETprep Answer


Q.64 How will you carry out the following conversion?

NEETprep Answer


Q.65 How will you carry out the following conversions?

NEETprep Answer


Q.66 Match the reactions given in Column I with the statements given in Column II.


Column I

Column II

A. Ammonolysis
B. Gabriel phthalimide synthesis
C. Hofmann bromamide reaction
D. reaction
1. Amine with a lesser number of carbon atoms
2. Detection test for primary amines.
3. Reaction of phthalimide with KOH and R—X
4. Reaction of alkyl halides with NH3
NEETprep Answer


Q.67 Match the compounds given in Column I with the items given in Column II.


Column I

Column II

A. Benzene sulphonyl chloride
B. Sulphanilic acid
C. Alkyl diazonium salts
D. Aryl diazonium salts
1. Zwitter ion
2. Hinsberg reagent
3. Dyes
4. Conversion to alcohols
NEETprep Answer


Assertion and Reason

In the following questions, a statement of Assertion (A) followed by a statement of Reason (R) is given. Choose the correct answer out of the following choices.

(a) Both assertion and reason are wrong.

(b) Doth assertion and reason are correct statements hut reason is not the correct explanation of assertion.

(c) Assertion is a correct statement but the reason is a wrong statement.

(d) Both assertion and reason are correct statements and reason is the correct explanation of assertion.

(e) Assertion is the wrong statement but the reason is the correct statement.


Q.68 Assertion (A) Acylation of amines gives a monosubstituted product whereas alkylation of amines gives a polysubstituted product.

Reason (R) Acyl group sterically hinders the approach of further acyl groups,

NEETprep Answer


Q.69 Assertion (A) Hofmann's bromamide reaction is given by primary amines.

Reason (R) Primary amines one more basic than secondary amines.

NEETprep Answer


Q.70 Assertion (A) N-ethylbenzene sulphonamide is soluble in alkali.

Reason (R) Hydrogen attached to nitrogen in sulphonamide is strongly acidic,

NEETprep Answer

Assertion and Reason

In the following questions, a statement of Assertion (A) followed by a statement of Reason (R) is given. Choose the correct answer out of the following choices.

(a) Both assertion and reason are wrong.

(b) Doth assertion and reason are correct statements hut reason is not the correct explanation of assertion.

(c) Assertion is a correct statement but the reason is a wrong statement.

(d) Both assertion and reason are correct statements and reason is the correct explanation of assertion.

(e) Assertion is the wrong statement but the reason is the correct statement.


Q.71 Assertion (A) N, N-diethyl benzene sulphonamide is insoluble in alkali.

Reason (R) Sulphonyl group attached to the nitrogen atom is a strong electron-withdrawing group.

NEETprep Answer


Q. 72 Assertion (A) Only a small amount of HCI is required in the reduction of nitro compounds with iron scrap and HCI in the presence of steam.

Reason (R) FeCl2 formed gets hydrolyzed to release HCI during the reaction.

NEETprep Answer


Q.73 Assertion (A) Aromatic 10 amines can be prepared by Gabriel phthalimide synthesis.

Reason (R) Aryl halides undergo nucleophilic substitution with anion formed by phthalimide.

NEETprep Answer


Q. 74 Assertion (A) Acetanilide is less basic aniline.

Reason (R) Acetylation of aniline results in a decrease of electron density on nitrogen.

NEETprep Answer


Q.75 A hydrocarbon 'A' (C4H8) on reaction with HCI gives a compound 'B,' (C4H9Cl), which on reaction with 1 mol of NH3 gives compound 'C,' (C4H11N). On reacting with NaNO2 and HCI followed by treatment with water, compound 'C' yields optically active alcohol, 'D'. Ozonolysis of 'A' gives 2 mols of acetaldehyde. Identify compounds 'A' to 'D'. Explain the reactions involved.

NEETprep Answer


Q.76 A colorless substance 'A' (C6H7N) is sparingly soluble in water and gives a water-soluble compound 'B' on treating with a mineral acid. On reacting with CHCl3 and alcoholic potash 'A' produces an obnoxious smell due to the formation of compound 'C. The reaction of 'N with benzenesulphony[ chloride gives compound 'D' which is soluble in alkali. With NaNO2 and HCl, 'A' forms compound 'E' which reacts with phenol in an alkaline medium to give an orange dye 'K Identity compounds 'A' to 'F.

NEETprep Answer


Q.77 Predict the reagent or the product in the following reaction sequence.

NEETprep Answer