An engine operating between 150°C and 25°C takes 500 J heat from a higher temperature reservoir if there are no frictional losses, then work done by engine is [MH CET 1999]
(1) 147.7 J
(2) 157.75 J
(3) 165.85 J
(4) 169.95 J
150°C और 25°C के बीच चलने वाला इंजन उच्च तापमान वाले कुंड से 500 J ताप लेता है यदि कोई घर्षणात्मक नुकसान नहीं हैं, तो इंजन द्वारा किया गया कार्य है [MH CET 1999]
(1) 147.7J
(2) 157.75J
(3) 165.85J
(4) 169.95J
The entropy values (in JK-1 mol-1) of H2(g) = 130.6, Cl2(g) = 223.0 and HCl(g) = 186.7 at 298 K and 1 atm pressure. Then entropy change for the reaction is
(1) + 540.3
(2) + 727.3
(3) – 166.9
(4) + 19.8
298K और 1 atm दाब पर H2(g), Cl2(g) और HCl(g) के एंट्रॉपी मान (JK-1 mol-1 में) 130.6, 223.0 और 186.7 हैं। तब अभिक्रिया के लिए एन्ट्रापी परिवर्तन है: [BHU 2005]
(1) + 540.3
(2) + 727.3
(3) – 166.9
(4) + 19.8
In an isobaric process, the ratio of heat supplied to the system (dQ) and work done by the system (dW) for diatomic gas is [AFMC 2002]
(1) 1 : 1
(2) 7 : 2
(3) 7 : 5
(4) 5 : 7
एक समदाबी प्रक्रम में, द्विपरमाण्विक गैस के लिए निकाय को आपूर्ति की जाने वाली ऊष्मा (dQ) और निकाय द्वारा किया गया कार्य (dW) का अनुपात है: [AFMC 2002]
(1) 1 : 1
(2) 7 : 2
(3) 7 : 5
(4) 5 : 7
The absolute enthalphy of neutralisation of the reaction will be [CBSE PMT 2005]
(1) Less than –57.33 kJ mol–1
(2) –57.33 kJ mol–1
(3) Greater than –57.33 kJ mol–1
(4) 57.33 kJ mol–1
अभिक्रिया के उदासीनीकरण की निरपेक्ष एन्थैल्पी होगी? [सीबीएसई पंत 2005]
(1) –57.33 kJ mol–1 से कम
(2) –57.33 kJ mol–1
(3) –57.33 kJ mol–1 से अधिक
(4) 57.33kJ mol–1
The standard entropies of CO2(g), C(s) and O2(g) are 213.5, 5.690 and 205 JK–1 respectively. The standard entropy of formation of CO2(g) is
(1) 1.86 JK–1
(2) 1.96 JK–1
(3) 2.81 JK–1
(4) 2.86 JK–1
CO2(g), C(s) और O2(g) की मानक एंट्रॉपियां क्रमशः 213.5, 5.690 और 205 JK–1 हैं। CO2(g) के निर्माण की मानक एन्ट्रापी है: [CPMT 2001]
(1) 1.86JK–1
(2) 1.96JK–1
(3) 2.81JK–1
(4) 2.86JK–1
A system is changed from state A to state B by one path and from B to A another path. If E1 and E2 are the corresponding changes in internal energy, then [Pb. PMT 2001]
(1)
(2)
(3)
(4) None of these
एक सिस्टम को अवस्था A से अवस्था B में एक पथ से और B से A को दूसरे पथ में परिवर्तित कर दिया जाता है। यदि E1 और E2 आंतरिक ऊर्जा में संबंधित परिवर्तन हैं तब: [Pb. PMT 2001]
(1)
(2)
(3)
(4) इनमें से कोई नहीं
The amount of heat measured for a reaction in a bomb calorimeter is
(1) ΔG
(2) ΔH
(3) ΔE
(4) PΔV
बम कैलोरीमीटर में अभिक्रिया के लिए मापी गई ऊष्मा की मात्रा है [AIIMS 1991]
(1) ΔG
(2) ΔH
(3) ΔE
(4) PΔV
The heat liberated when 1.89 g of benzoic acid is burnt in a bomb calorimeter at 25°C increases the temperature of 18.94 kg of water by 0.632°C. If the specific heat of water at 25°C is 0.998 cal/g-deg, the value of the heat combustion of benzoic acid is
(1) 771.1 kcal
(2) 871.2 kcal
(3) 881.1 kcal
(4) 981.1 kcal
25°C पर बम कैलोरीमीटर में 1.89 g बेंजोइक अम्ल जलने पर उष्मा मुक्त हो जाती है, जिससे 0.632°C से 18.94 kg जल का तापमान बढ़ जाता है। यदि 25°C पर जल की विशिष्ट ऊष्मा 0.998 cal/g-deg है, तो बेंजोइक अम्ल के ऊष्मा दहन का मान है:
(1) 771.1kcal
(2) 871.2kcal
(3) 881.1kcal
(4) 981.1kcal
In thermodynamics, a process is called reversible when
(1) Surroundings and system change into each other
(2) There is no boundary between system and surroundings
(3) The surroundings are always in equilibrium with the system
(4) The system changes into the surroundings spontaneously
ऊष्मागतिकी में, किसी प्रक्रम को उत्क्रमणीय कहा जाता है जब [AIIMS 2001]
(1) परिवेश और निकाय एक दूसरे में बदलते हैं
(2) निकाय और परिवेश के बीच कोई सीमा नहीं है
(3) परिवेश निकाय के साथ हमेशा साम्यावस्था में होता है
(4) निकाय स्वत परिवेश में बदल जाता है
A solution of 500 ml of 0.2 M KOH and 500 ml of 0.2 M HCl is mixed and stirred; the rise in temperature is T1. The experiment is repeated using 250 ml each of solution, the temperature raised is T2. Which of the following is true
(1) T1 = T2
(2) T1 = 2T2
(3) T1 = 4T2
(4) T2 = 9T1
0.2 M KOH के 500 ml और 0.2 M HCl के 500 ml विलयन को मिश्रित और विलोड़ित किया जाता है; तापमान में वृद्धि T1 है। प्रयोग विलयन के प्रत्येक 250 ml का उपयोग करके दोहराया जाता है, तो बढ़ा हुआ तापमान T2 है। निम्नलिखित में से कौन सा सही है: [EAMCET 1987; MP PET 1994]
(1) T1 = T2
(2) T1 = 2T2
(3) T1 = 4T2
(4) T2 = 9T1