A capillary tube of radius \(r\) is immersed in water and water rises in it to a height \(h.\) The mass of the water in the capillary is \(5\) g. Another capillary tube of radius \(2r\) is immersed in water. The mass of water that will rise in this tube is:

1. \(5.0\) g 2. \(10.0\) g
3. \(20.0\) g 4. \(2.5\) g
Subtopic:  Capillary Rise |
 63%
Level 2: 60%+
NEET - 2020
Hints
Links

Water rises to height '\(h\)' in a capillary tube. If the length of capillary tube above the surface of the water is made less than \('h'\), then:

1. water does not rise at all.
2. water rises up to the tip of capillary tube and then starts overflowing like a fountain.
3. water rises up to the top of capillary tube and stays there without overflowing.
4. water rises up to a point a little below the top and stays there.

Subtopic:  Capillary Rise |
 76%
Level 2: 60%+
NEET - 2015
Hints

If a capillary tube is partially dipped vertically into liquid and the levels of the liquid inside and outside are the same, then the angle of contact is:

1. \(90^\circ\) 2. \(30^\circ\)
3. \(45^\circ\) 4. \(0^\circ\)

Subtopic:  Capillary Rise |
 77%
Level 2: 60%+
Hints
Links

advertisementadvertisement

Three liquids of densities \(\rho_1,\rho_2\) and \(\rho_3\) \((\rho_1>\rho_2>\rho_3)\) having the same value of the surface tension \(T,\) rise to the same height in three identical capillaries. The angles of contact \(\theta_1,\theta_2\) and \(\theta_3\) obey:
1. \( \frac{\pi}{2}>\theta_1>\theta_2>\theta_3 \geq 0 \)
2. \( 0 \leq \theta_1<\theta_2<\theta_3<\frac{\pi}{2} \)
3. \( \frac{\pi}{2}<\theta_1<\theta_2<\theta_3<\pi \)
4. \( \pi>\theta_1>\theta_2>\theta_3>\frac{\pi}{2} \)

Subtopic:  Capillary Rise |
 69%
Level 2: 60%+
NEET - 2016
Hints

In a vertical capillary of height \(3h,\) water rises upto height \(h.\) If the capillary is tilted at \(30^\circ\) with horizontal, then the height upto which water will rise becomes:
1. \(3h\)
2. \(2h\)
3.  \(h\)
4. \(\dfrac {3h} 2\)
Subtopic:  Capillary Rise |
Level 4: Below 35%
Please attempt this question first.
Hints
Please attempt this question first.

A long capillary tube with a radius of \(1\) mm, open at both ends, is filled with water and placed vertically. What will be the height of the column of water left in the capillary? The thickness of the capillary walls is negligible, and the surface tension of water is \(70\) dyne/cm.
1. \(2.5~\text{cm}\)
2. \(2.8~\text{cm}\)
3. \(3.0~\text{cm}\)
4. \(3.2~\text{cm}\)
Subtopic:  Capillary Rise |
 74%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement