If heat given to a system is 6 kcal and work done is 6 kJ. Then the change in internal energy is :

(1) 19.1 kJ

(2) 12.5 kJ

(3) 25 kJ

(4) Zero

यदि किसी निकाय को दी गई ऊष्मा 6 kcal है और किया गया कार्य 6kJ है। तब आंतरिक ऊर्जा में परिवर्तन है: 

(1) 19.1kJ

(2) 12.5kJ

(3) 25 kJ

(4) शून्य 

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

The P-V graph of an ideal gas cycle is shown here as below. The adiabatic process is described by

(1) AB and BC

(2) AB and CD

(3) BC and DA

(4) BC and CD

एक आदर्श गैस चक्र का P-ग्राफ जैसा कि दिखाया गया है। रूद्धोष्म प्रक्रम को किसके द्वारा व्यक्त किया जाता है?

(1) AB और BC

(2) AB और CD

(3) BC और DA

(4) BC और CD

 52%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

A sample of gas expands from volume V1 to V2. The amount of work done by the gas is greatest when the expansion is 

(1) Isothermal

(2) Isobaric

(3) Adiabatic

(4) Equal in all cases

गैस के एक नमूने को आयतन V1 से V2 तक प्रसारित किया जाता है। गैस द्वारा किया गया कार्य सबसे अधिक होता है जब प्रसार है 

(1) समतापी 

(2) समदाबी  

(3) रूद्धोष्मीय 

(4) सभी स्थितियो में समान 

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

The specific heat of a gas in an isothermal process is -

(1) Infinite

(2) Zero

(3) Negative

(4) Remains constant

समतापी प्रक्रम में गैस की विशिष्ट ऊष्मा होती है -

(1) अनंत

(2) शून्य 

(3) ऋणात्मक

(4) नियत रहती है

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

The adiabatic Bulk modulus of a perfect gas at pressure P is given by 

(1) P

(2) 2P

(3) P/2

(4) γ P

P दाब पर एक आदर्श गैस का रुद्धोष्म आयतन गुणांक निम्न द्वारा दिया गया है -

(1) P

(2) 2P

(3) P/2

(4) γ P

To unlock all the explanations of this course, you need to be enrolled.

Hints

If a cylinder containing a gas at high pressure explodes, the gas undergoes -

(1) Reversible adiabatic change and fall of temperature

(2) Reversible adiabatic change and rise of temperature

(3) Irreversible adiabatic change and fall of temperature

(4) Irreversible adiabatic change and rise of temperature

यदि उच्च दाब पर गैस सिलेंडर फट जाता है, तो गैस में होता है -

(1) उत्क्रमणीय रूद्धोष्म परिवर्तन और तापमान का गिरना

(2) उत्क्रमणीय रूद्धोष्म परिवर्तन और तापमान का बढ़ना

(3) अनुत्क्रमणीय रूद्धोष्म परिवर्तन और तापमान का गिरना

(4) अनुत्क्रमणीय रूद्धोष्म परिवर्तन और तापमान का बढ़ना

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

In a cyclic process, the internal energy of the gas -

(1) Increases

(2) Decreases

(3) Remains constant

(4) Becomes zero

एक चक्रीय प्रक्रम में, गैस की आंतरिक ऊर्जा -

(1) बढ़ती है 

(2) घटती है

(3) स्थिर रहती है

(4) शून्य हो जाती है

 63%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

During the adiabatic expansion of 2 moles of a gas, the internal energy of the gas is found to decrease by 2 joules, the work done during the process by the gas will be equal to -

(1) 1 J

(2) –1 J

(3) 2 J

(4) – 2 J

एक गैस के 2 मोल के रुद्धोष्म प्रसार के दौरान, गैस की आंतरिक ऊर्जा में 2 जूल की कमी होती है, प्रक्रम के दौरान गैस द्वारा किया गया कार्य होगा -

(1) 1 J

(2) –1 J

(3) 2 J

(4) – 2 J

 55%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

The heat energy absorbed by a system is going through a cyclic process shown in the figure is:

(1) 107 π J

(2) 104 π J

(3) 10π J

(4) 10–3π J

दिखाई गई आकृति में चक्रीय प्रक्रम से होकर गुज़रने वाले निकाय द्वारा अवशोषित ऊष्मा है:

(1) 107π J

(2) 104π J

(3) 102π J

(4) 10–3π J

 53%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

An ideal gas expands isothermally from a volume V1 to V2 and then compressed to original volume V1 adiabatically. Initial pressure is P1 and final pressure is P3. The total work done is W. Then -

(1) P3>P1,  W>0

(2) P3<P1,  W<0

(3) P3>P1,  W<0

(4) P3=P1,  W=0

एक आदर्श गैस समतापीय रूप से आयतन V1 से V2 तक प्रसारित होती है और तब रुद्धोष्म रूप से प्रारम्भिक आयतन V1 तक संपीडित होती है। प्रारंभिक दाब P1 है और अंतिम दाब P3 है। किया गया कुल कार्य W है। तब -

(1) P3>P1,  W>0

(2) P3<P1,  W<0

(3) P3>P1,  W<0

(4) P3=P1,  W=0

 57%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints