Heat capacity is equal to the product of:

1.  mass and gas constant

2.  mass and specific heat

3.  latent heat and volume of water

4.  mass and Avogadro number

 

Subtopic:  Calorimetry |
 94%
Level 1: 80%+
Hints

When a block of iron floats in Hg at 0°C, a fraction K1 of its volumen= is submerged, while at temperature of 60°C a fraction K2 is seen to be submersed. If the coefficient of volume expansion of iron is γFe and that of mercury is γHg, then the ratio K1K2 can be expressed as:

(1) 1+60γFe1+60γHg

(2) 1-60γFe1+60γHg

(3) 1+60γFe1-60γHg

(4) 1+60γHe1-60γFe

Subtopic:  Thermal Expansion |
 55%
Level 3: 35%-60%
Hints

Ifαcandαfdenotethenumericalvaluesofcoefficientoflinear
expansionofasolid,expressedper°Candper°Frespectively,
then

1.  αc>αf

2.  αf>αc

3.  αf=αc

4.  αf+αc=0

Subtopic:  Thermal Expansion |
Level 4: Below 35%
Hints

advertisementadvertisement

Apendulumclockrunsfastby5sec.perdayat20°Candgoesslowby10sec.perdayat35°C.Itshowscorrecttimeatatemperatureof

1.  27.5°C

2.  25°C

3.  30°C

4.  33°C

 

Subtopic:  Thermal Expansion |
 68%
Level 2: 60%+
Hints

Two identical bodies are made of a material whose heat capacity increases with temperature. One of these is at \(100^{\circ} \mathrm{C}\), while the other one is at \(0^{\circ} \mathrm{C}\). If the two bodies are brought into contact, then assuming no heat loss, the final common temperature will be:

1. \(50^{\circ} \mathrm{C}\)
2.  more than \(50^{\circ} \mathrm{C}\) 
3. less than \(50^{\circ} \mathrm{C}\) but greater than \(0^{\circ} \mathrm{C}\) 
4. \(0^{\circ} \mathrm{C}\)

Subtopic:  Calorimetry |
 66%
Level 2: 60%+
NEET - 2016
Hints
Links

A piece of ice falls from a height h so that it melts completely. Only one-quarter of the heat produced is absorbed by the ice and all energy of ice gets converted into heat during its fall. The value of h is [Latent heat of ice is 3.4x105J/Kg and g=10N/Kg]

1. 544 km

2. 136 km

3.  68  km

4.  34 km

Subtopic:  Calorimetry |
 79%
Level 2: 60%+
NEET - 2016
Hints

advertisementadvertisement

The value of the coefficient of volume expansion of glycerin is \(5\times10^{-4}\) K-1. The fractional change in the density of glycerin for a temperature increase of \(40^\circ \mathrm{C}\) will be:

1. \(0.015\) 2. \(0.020\)
3. \(0.025\) 4. \(0.010\)
Subtopic:  Thermal Expansion |
 83%
Level 1: 80%+
NEET - 2015
Hints
Links

Steam at \(100^{\circ}\mathrm{C}\) is injected into 20 g of \(10^{\circ}\mathrm{C}\) water. When water acquires a temperature of \(80^{\circ}\mathrm{C}\), the mass of water present will be: (Take specific heat of water =1 cal g-1 \(^\circ\)C-1 and latent heat of steam = 540 cal g-1)

1. 24 g 2. 31.5g
3. 42.5 g 4. 22.5 g
Subtopic:  Calorimetry |
 73%
Level 2: 60%+
NEET - 2014
Hints
Links

Liquid oxygen at 50K is heated to 300K at constant pressure of 1 atm. The rate of heating is constant.Which one of the following graphs represents the variation of temperature with time?

1. 

2. 

3. 

4. 

Subtopic:  Thermal Expansion |
 80%
Level 1: 80%+
Hints

advertisementadvertisement

The coefficient of linear expansion of brass and steel are α1 and α2. If we take a brass rod of length l1 and steel rod of length l2 at 0°C, their difference in length l2-l1 will remain the same at a temperature if

1. α1l2=α2l1                                 

2. α1l22=α2l12

3. α12l1=α22l2                                   

4. α1l1=α2l2

Subtopic:  Thermal Expansion |
 80%
Level 1: 80%+
Hints
Links