If the RMS current in a \(50~\text{Hz}\) AC circuit is \(5~\text{A}\), the value of the current \(\frac{1}{300}~\text{s}\) after its value becomes zero is:
1. \(5\sqrt2~A\)
2. \(5\sqrt{\frac32}~A\)
3. \(\sqrt{\frac56}~A\)
4. \(\frac{5}{\sqrt2}~A\)

An alternating current generator has an internal resistance ${\mathrm{R}}_{\mathrm{g}}$ and an internal reactance ${\mathrm{X}}_{\mathrm{g}}$. It is used to supply power to a passive load consisting of a resistance ${\mathrm{R}}_{\mathrm{g}}$ and a reactance ${\mathrm{X}}_{\mathrm{L}}$. For maximum power to be delivered from the generator to the load, the value of ${\mathrm{X}}_{\mathrm{L}}$ is equal to :

1. zero

2. X_g

3. -X_g

4. R_g

Which of the following combinations should be selected for better tuning of an LCR circuit used for communication?
1. \(R = 20~\Omega,~L= 1.5~\text{H}, ~C = 35~\mu \text{F}\)
2. \(R = 25~\Omega,~L= 2.5~\text{H}, ~C = 45~\mu \text{F}\)
3. \(R = 15~\Omega,~L= 3.5~\text{H}, ~C = 30~\mu \text{F}\)
4. \(R = 25~\Omega,~L= 1.5~\text{H}, ~C = 45~\mu \text{F}\)

An inductor of reactance \(1~\Omega\) and a resistor of \(2~\Omega\)$\mathrm{}$ are connected in series to the terminals of a \(6~\text{V}\) (RMS) AC source. The power dissipated in the circuit is:
1. \(8~\text{W}\)
2. \(12~\text{W}\)
3. \(14.4~\text{W}\)
4. \(18~\text{W}\)

As the frequency of an AC circuit increases, the current first increases and then decreases. What combination of circuit elements is most likely to comprise the circuit?

(a) Inductor and capacitor
(b) Resistor and inductor
(c) Resistor and capacitor
(d) Resistor, inductor, and capacitor

Choose the correct option.

1. (b, c)
2. (c, d)
3. (b, d)
4. (a, d)

In an alternating current circuit consisting of elements in series, the current increases on increasing the frequency of the supply. Which of the following elements are likely to constitute the circuit?

(a) Only resistor
(b) Resistor and an inductor
(c) Resistor and a capacitor
(d) Only a capacitor

Choose the correct option.

1. (b, c)

2. (a, d)

3. (b, d)

4. (c, d)

For an L-C-R circuit, the power transferred from the driving source to the driven oscillator is $\mathrm{P}={\mathrm{I}}^2\mathrm{Zcos\varphi }$.
 

1. (a, b, c)
2. (a, c, d)
3. (b, c, d)
4. (c, d)

When an AC voltage of 220 V is applied to the capacitor C

 

Choose the correct option

1. (b, c)
2. (a, d)
3. (b, d)
4. (c, d)