A network of resistors is connected across a \(10~\text{V}\) battery with an internal resistance of \(1~\Omega\) as shown in the circuit diagram. The equivalent resistance of the circuit is:
         
1.  \(\frac{17}{3}~\Omega\)
2.  \(\frac{14}{3}~\Omega\)
3.  \(\frac{12}{7}~\Omega\)
4.  \(\frac{14}{7}~\Omega\)

The effective resistance of a parallel connection that consists of four wires of equal length, equal area of cross-section, and same material is \(0.25~\Omega\). What will be the effective resistance if they are connected in series?
1. \(1~\Omega\) 
2. \(4~\Omega\)
3. \(0.25~\Omega\)
4. \(0.5~\Omega\)

The equivalent resistance between \(A\) and \(B\) for the mesh shown in the figure is:

A ring is made of a wire having a resistance of \(R_0=12~\Omega.\). Find points \(\mathrm{A}\) and \(\mathrm{B}\), as shown in the figure, at which a current-carrying conductor should be connected so that the resistance \(R\) of the subcircuit between these points equals \(\frac{8}{3}~\Omega\)$\mathrm{?}$
      
1. \(\frac{l_1}{l_2} = \frac{5}{8}\)
2. \(\frac{l_1}{l_2} = \frac{1}{3}\)
3. \(\frac{l_1}{l_2} = \frac{3}{8}\)
4. \(\frac{l_1}{l_2} = \frac{1}{2}\)

A wire of resistance \(12~ \Omega \text{m}^{-1}\)${\mathrm{}}^{}$ is bent to form a complete circle of radius \(10~\text{cm}\). The resistance between its two diametrically opposite points, \(A\) and \(B\) as shown in the figure, is:
        
1. \(0.6\pi~\Omega\)$$
2. \(3\pi ~\Omega\)$$
3. \(61 \pi~ \Omega\)$$
4. \(6\pi~\Omega\)$$