Q. No.Given below two statements:
| Statement I: | Kirchhoff’s junction law follows the conservation of charge. |
| Statement II: | Kirchhoff’s loop law follows the conservation of energy. |
| 1. | Both Statement I and Statement II are wrong. |
| 2. | Statement I is correct but Statement II is wrong. |
| 3. | Statement I is wrong and Statement II is correct. |
| 4. | Both Statement I and Statement II are correct. |
In the following circuit, the battery has an e.m.f of 12 volts and zero internal resistance while the battery E has an e.m.f of 2 volts. If the galvanometer G reads zero, then the value of the resistance X in ohms is:
1. 10
2. 100
3. 500
4. 200
Twelve wires of equal resistance R are connected to form a cube. The effective resistance between two diagonal ends A and E will be:
1.
2.
3.
4.
The potential difference \(V_\mathrm{A}-V_\mathrm{B}\) between the points \(\mathrm{A}\) and \(\mathrm{B}\) in the given figure is:
| 1. | \(-3~\text{V}\) | 2. | \(+3~\text{V}\) |
| 3. | \(+6~\text{V}\) | 4. | \(+9~\text{V}\) |
See the electrical circuit shown in this figure. Which of the following is a correct equation for it?
| 1. | \(\varepsilon_1-(i_1+i_2)R-i_1r_1=0\) |
| 2. | \(\varepsilon_2-i_2r_2-\varepsilon_1-i_1r_1=0\) |
| 3. | \(-\varepsilon_2-(i_1+i_2)R+i_2r_2=0\) |
| 4. | \(\varepsilon_1-(i_1+i_2)R+i_1r_1=0\) |
For the circuit given below, Kirchhoff's loop rule for the loop \(BCDEB\) is given by the equation:
| 1. | \(-{i}_2 {R}_2+{E}_2-{E}_3+{i}_3{R}_1=0\) |
| 2. | \({i}_2{R}_2+{E}_2-{E}_3-{i}_3 {R}_1=0\) |
| 3. | \({i}_2 {R}_2+{E}_2+{E}_3+{i}_3 {R}_1=0\) |
| 4. | \(-{i}_2 {R}_2+{E}_2+{E}_3+{i}_3{R}_1=0\) |
A battery of e.m.f. 10 V is connected to resistance as shown in the figure below. The potential difference between the points A and B is:
1. –2 V
2. 2 V
3. 5 V
4.
Consider the circuit shown in the figure below. The current I3 is equal to:
1. 5 A
2. 3 A
3. –3 A
4. –5/6 A
\(\mathrm{A, B}~\text{and}~\mathrm{C}\) are voltmeters of resistance \(R\), \(1.5R\) and \(3R\) respectively as shown in the figure above. When some potential difference is applied between \(\mathrm{X}\) and \(\mathrm{Y}\), the voltmeter readings are \({V}_\mathrm{A}\), \({V}_\mathrm{B}\) and \({V}_\mathrm{C}\) respectively. Then:
| 1. | \({V}_\mathrm{A} ={V}_\mathrm{B}={V}_\mathrm{C}\) | 2. | \({V}_\mathrm{A} \neq{V}_\text{B}={V}_\mathrm{C}\) |
| 3. | \({V}_\mathrm{A} ={V}_\mathrm{B}\neq{V}_\mathrm{C}\) | 4. | \({V}_\mathrm{A} \ne{V}_\mathrm{B}\ne{V}_\mathrm{C}\) |
© 2024 GoodEd Technologies Pvt. Ltd.