The compressibility of water is $4×{10}^{-5}$ per unit atmospheric pressure. The decrease in volume of 100 cubic centimeter of water under a pressure of 100 atmosphere will be -

(a) 0.4 cc           (b) $4×{10}^{-5}cc$

(c) 0.025 cc       (d) 0.004 cc

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

If a rubber ball is taken at the depth of 200 m in a pool, its volume decreases by 0.1%. If the density of the water is $1×{10}^{3}kg/{m}^{3}$ and $g=10m/{s}^{2}$, then the volume elasticity in  will be

(a) ${10}^{8}$                                        (b) $2×{10}^{8}$

(c)${10}^{9}$                                         (d) $2×{10}^{9}$

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

When a pressure of 100 atmosphere is applied on a spherical ball, then its volume reduces by 0.01%. The bulk modulus of the material of the rubber in  is:

(a) $10×{10}^{12}$                                (b) $100×{10}^{12}$

(c) $1×{10}^{12}$                                  (d) $20×{10}^{12}$

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

A uniform cube is subjected to volume compression. If each side is decreased by 1%, then bulk strain is

(a) 0.01                              (b) 0.06

(c) 0.02                              (d) 0.03

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

A ball falling in a lake of depth 200 m shows 0.1% decrease in its volume at the bottom. What is the bulk modulus of the material of the ball

(a) $19.6×{10}^{8}N/{m}^{2}$                (b) $19.6×{10}^{-10}N/{m}^{2}$

(c) $19.6×{10}^{10}N/{m}^{2}$               (d) $19.6×{10}^{-8}N/{m}^{2}$

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

The Bulk modulus for an incompressible liquid is

(a) Zero                                           (b) Unity

(c) Infinity                                       (d) Between 0 to 1

Concept Questions :-

Stress-strain

Difficulty Level:

The pressure applied from all directions on a cube is P. How much its temperature should be raised to maintain the original volume ? The volume elasticity of the cube is  $\beta$ and the coefficient of volume expansion is $\alpha$ -

(a) $\frac{P}{\alpha \beta }$                                 (b) $\frac{P\alpha }{\beta }$

(c) $\frac{P\beta }{\alpha }$                                 (d) $\frac{\alpha \beta }{P}$

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

The ratio of lengths of two rods A and B of same material is 1 : 2 and the ratio of their radii is 2 : 1, then the ratio of modulus of rigidity of A and B will be

(a)       4 : 1                                           (b)   16 : 1

(c)       8 : 1                                           (d)   1 : 1

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

Two wires A and B of same length and of the same material have the respective radii ${r}_{1}$ and ${r}_{2}$. Their one end is fixed with a rigid support, and at the other end equal twisting couple is applied. Then the ratio of the angle of twist at the end of A and the angle of twist at the end of B will be

(a) $\frac{{r}_{1}^{2}}{{r}_{2}^{2}}$                                           (b) $\frac{{r}_{2}^{2}}{{r}_{1}^{2}}$

(c) $\frac{{r}_{2}^{4}}{{r}_{1}^{4}}$                                           (d) $\frac{{r}_{1}^{4}}{{r}_{2}^{4}}$

Concept Questions :-

Stress-strain
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

When a spiral spring is stretched by suspending a load on it, the strain produced is called-

(a)  Shearing                                  (b)   Longitudinal

(c)  Volume                                    (d)   Transverse

Concept Questions :-

Stress-strain