Select Question Set:
Q. No.Two wires, made of the same material, but of lengths \(L,2L\) and the cross-sections \(A,3A\) respectively, are subjected to forces \(F_1\) and \(F_2\) so that they just break. Then:
1.
\(F_1=F_2\)
2.
\(2F_1=F_2\)
3.
\(3F_1=F_2\)
4.
\(6F_1=F_2\)
Subtopic: Young's modulus |
62%
Level 2: 60%+
Hints
If two identically shaped rods are joined end to end and compressive forces are applied to the system, the compressive strain will be:
| 1. | larger in the rod with a larger Young's modulus |
| 2. | larger in the rod with a smaller Young's modulus |
| 3. | equal in both the rods |
| 4. | negative in the rod with a smaller Young's modulus |
Subtopic: Young's modulus |
66%
Level 2: 60%+
Hints
The elastic energy density in a stretched wire is:
| 1. | \(\text{(stress)}^2 × \text{strain}\) | 2. | \(\text{stress} × \text{strain}\) |
| 3. | \(\dfrac12\times \text{stress} × \text{strain}\) | 4. | \(\text{stress} × \text{(strain)}^2\) |
Subtopic: Potential energy of wire |
92%
Level 1: 80%+
Hints
The breaking stress in two wires of different materials \(A,B\) are in the ratio: \(\dfrac{S_A}{S_B}=\dfrac12,\) while their radii are in the ratio: \(\dfrac{r_A}{r_B}=\dfrac12.\) The tensions under which they break are \(T_A\) and \(T_B.\) Then \(\dfrac{T_A}{T_B}=\)?
| 1. | \(2\) | 2. | \(\dfrac14\) |
| 3. | \(\dfrac18\) | 4. | \(\dfrac1{2\sqrt2}\) |
Subtopic: Stress - Strain |
72%
Level 2: 60%+
Hints
An ideal gas has an isothermal bulk modulus of \(B_1.\) Its volume is doubled, isothermally. The bulk modulus is now:
| 1. | \(B_1\) | 2. | \(2B_1\) |
| 3. | \( \dfrac {B_1}{2}\) | 4. | \(\dfrac {B_1}{\sqrt 2}\) |
Subtopic: Shear and bulk modulus |
Level 3: 35%-60%
Hints
A uniform rod \(AB\) is rotated at a constant angular speed about its end \(A,\) the rotation axis being perpendicular to \(AB.\) During rotation, stresses are set up in the rod. Let the stress at \(A\) be \(\sigma_A\) and that at the centre \(C\) be \(\sigma_C.\) Then:
1. \(\sigma_A=\sigma_C\)
2. \(\sigma_A=2\sigma_C\)
3. \(\sigma_C=2\sigma_A\)
4. \(\sigma_C=\dfrac34\sigma_A\)
1. \(\sigma_A=\sigma_C\)
2. \(\sigma_A=2\sigma_C\)
3. \(\sigma_C=2\sigma_A\)
4. \(\sigma_C=\dfrac34\sigma_A\)
Subtopic: Stress - Strain |
Level 4: Below 35%
Hints
The block, shown in the figure, is suspended as shown from two identical steel wires. The extension in the wires due to the tension is \(\Delta l_1.\) If the block is suspended by one of the wires the extension in it is \(\Delta l_2.\) Then \(\dfrac{\Delta l_1}{\Delta l_2}\) equals:
| 1. | \(1\) | 2. | \(2\) |
| 3. | \(\sqrt 2\) | 4. | \(\dfrac12\) |
Subtopic: Young's modulus |
64%
Level 2: 60%+
Hints
Unlock IMPORTANT QUESTION
This question was bookmarked by 5 NEET 2025 toppers during their NEETprep journey. Get Target Batch to see this question.
✨ Perfect for quick revision & accuracy boost
Buy Target Batch
Access all premium questions instantly
A large cylindrical piece of a dense solid elastic metal stands on its end as shown in the figure. The metal is uniform and isotropic. The stress in the material as a function of height is shown correctly by:
| 1. |  |
2. |  |
| 3. |  |
4. |  |
Subtopic: Stress - Strain Curve |
Level 3: 35%-60%
Hints
An extremely long solid rod of length \(L\) starts falling longitudinally towards a large point mass \(M,\) the near end of the rod being at a distance \(L\) from the mass \(M.\) The rod experiences:
| 1. | no stress. | 2. | compressive stress. |
| 3. | tensile stress. | 4. | shear stress. |
Subtopic: Stress - Strain |
51%
Level 3: 35%-60%
Hints
A cube made of a homogeneous, isotropic elastic solid is acted upon by forces of equal magnitude acting perpendicular to its opposite faces as shown. Forces are applied uniformly over the area of each face. The stress at the centre of the cube is:
1. tensile
2. compressive
3. shear
4. zero
1. tensile2. compressive
3. shear
4. zero
Subtopic: Stress - Strain |
Level 3: 35%-60%
Hints
Select Question Set:
© 2025 GoodEd Technologies Pvt. Ltd.