The standard electrode potentials (reduction) of Pt/Fe3+,Fe2+andPt/Sn4+,Sn2+are+0.77Vand+0.15V respectively at 250C.The standard EMF of the reaction Sn4++2Fe2+Sn2++2Fe3+is-

(A) – 0.62 V                                        

(B) – 0.92 V

(C) + 0.31 V                                        

(D) + 0.85 V

 

250CपरPt/Fe2+,Fe3+औरPt/Sn4+,Sn2+के मानक इलेक्ट्रोड विभव (अपचयन) क्रमशः+0.77Vऔर+0.15Vहैं,अभिक्रिया Sn4++2Fe2+Sn2++2Fe3+ का मानक विद्युत वाहक बल है-

(1) – 0.62 V                                        

(2) – 0.92 V

(3) + 0.31 V

(4) + 0.85 V

 

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

Acetic acid has Ka = 1.8 × 10–5 while formic acid had Ka = 2.1 × 10–4. What would be the magnitude of the emf of the cell

Pt(H2) 0.1Maceticacid+0.1Msodiumacetate0.1Mformicacid+0.1Msodiumformate Pt(H2) at 25°C

(1) 0.0315 volt

(2) 0.0629 volt

(3) 0.0455 volt

(4) 0.0545 volt

एसीटिक अम्ल में Ka = 1.8 × 10–5 होता है जबकि फार्मिक अम्ल में Ka = 2.1 × 10–4 होता है। सेल के विद्युत वाहक बल का परिमाण क्या होगा

Pt(H2) 0.1Mएसीटिक अम्ल+0.1Mसोडियम एसीटेट 0.1Mफार्मिकअम्ल+0.1Mसोडियम फार्मेट 25°C पर Pt(H2)

(1) 0.0315 volt

(2) 0.0629 volt

(3) 0.0455 volt

(4) 0.0545 volt

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

Some half cell reaction & their standard potential are given which combination would result in a cell with the largest potential.

(i)A+e-A-E°=0.24

(ii)B-+e-B-2E°=1.25

(iii)C-+2e-C-3E-=1.25

(iv)D+2e-D-2E°=0.06

(v)E+4e-E-4E°=0.38

(A) i and ii                                                   

(B) ii and iii

(C) iv and v                                                 

(D) ii and v

 

 

कुछ अर्ध सेल अभिक्रिया और उनकी मानक विभव दी गयी है, जिसके संयोजन से सबसे ज्यादा विभव वाले सेल का परिणाम होगा।

(i)A+e-A-E°=0.24

(ii)B-+e-B-2E°=1.25

(iii)C-+2e-C-3E-=1.25

(iv)D+2e-D-2E°=0.06

(v)E+4e-E-4E°=0.38

(1) i और ii

(2) ii और iii

(3) iv और v

(4) ii और v

 

 

 67%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

Calculate the maximum work that can be obtained from the Daniell cell given below -

Zn(s)|Zn2+(aq)||Cu2+(aq)|Cu(s).

Given that EZn2+/Zn°=-0.76VandECu2+/Cu°=+0.34V

(1) – 212300 J                                        

(2) – 202100 J

(3) – 513100 J                                        

(4) – 232120 J

 

नीचे दिए गए डेनियल सेल से प्राप्त अधिकतम कार्य की गणना कीजिए-

Zn(s)|Zn2+(aq)||Cu2+(aq)|Cu(s).

दिया गया है कि EZn2+/Zn°=-0.76VऔरECu2+/Cu°=+0.34V

(1) – 212300 J                                        

(2) – 202100 J

(3) – 513100 J                                        

(4) – 232120 J

 

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

Which of these ions Cu+, Co3+, Fe2+ is stable in aqueous medium.

Given :E°Cu2+/Cu+ = 0.15 volt ; E°Cu+/Cu = 0.53 V ;E°Co3+/Co2+ = 1.82 V ;

Fe3+/Fe2+ = 0.77 V ;E°Fe2+Fe = –0.44 V ;E°O2,H+/H2O = 1.23 V

(1) Cu+, Co3+

(2) Co3+

(3) Cu+

(4) Co3+, Cu+, Fe2+

इन आयनों Cu+, Co3+, Fe2+ में से कौन जलीय माध्यम में स्थायी है।

दिया गया है: E°Cu2+/Cu+ = 0.15 volt ; E°Cu+/Cu = 0.53 V ;E°CO3 + / CO2 += 1.82 V;

Fe3+/Fe2+ = 0.77 V ;E°Fe2+Fe = –0.44 V ;E°O2,H+/H2O = 1.23 V

(1) Cu+, Co3+

(2) Co3+

(3) Cu+

(4) Co3+, Cu+, Fe2+

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

The standard redox potentials E of the following systems are-

System                                                                                    E° (volts)

(i)MnO4-+8H++5eMn2++4H2O1.51

(ii)Sn4++2eSn2+0.15

(iii)Cr2O72-+14H++6e2Cr3++7H2O1.33

(iv)Ce4++eCe3+1.61

The oxidising power of the various species decreases in the order-

1. Ce4+>Cr2O72->Sn4+>MnO4-

2. Ce4+>MnO4->Cr2O72->Sn4+

3. Cr2O72->Sn4+>Ce4++MnO4-

4. MnO4->Ce4+>Sn4+>Cr2O72-

निम्नलिखित निकायों में से मानक रेडॉक्स विभव E हैं-

   निकाय                                                                   E° (volts)

(i)MnO4-+8H++5eMn2++4H2O1.51

(ii)Sn4++2eSn2+0.15

(iii)Cr2O72-+14H++6e2Cr3++7H2O1.33

(iv)Ce4++eCe3+1.61

विभिन्न स्पीशीज की ऑक्सीकारक क्षमता निम्न क्रम में घट जाती है-

(1)Ce4+>Cr2O72->Sn4+>MnO4-

(2)Ce4+>MnO4->Cr2O72->Sn4+

(3)Cr2O72->Sn4+>Ce4++MnO4-

(4)MnO4->Ce4+>Sn4+>Cr2O72-

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

The number of electrons delivered at the cathode during electrolysis by a current of 1 ampere in 60 seconds is (charge on electron = 1.60 x 10-19 C)

(a) 6 x 1023

(b) 6 x 1020

(c) 3.75 x 1020

(d) 7.48 x 1023

60 सेकंड में 1 एम्पीयर की धारा द्वारा विद्युत अपघटन के दौरान कैथोड पर दिए गए इलेक्ट्रॉनों की संख्या होती है (इलेक्ट्रॉन पर आवेश = 1.60 x 10-19 C)

(1) 6 x 1023

(2) 6 x 1020

(3) 3.75 x 1020

(4) 7.48 x 1023

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

The specific conductance has the unit :

(1) ohm-1cm-1                           

(2) ohm.cm

(3) ohmcm-1                             

(4) ohm-1.cm

विशिष्ट चालकता की इकाई होती है:

(1) ohm-1cm-1

(2) ohm.cm

(3) ohmcm-1  

(4) ohm-1.cm

 65%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

During the electrolysis of molten sodium chloride, the time required to produce 0.10 mol of chlorine gas using a current of 3 amperes is

(1) 55 minutes                       

(2) 110 minutes

(3) 220 minutes                       

(4) 330 minutes

गलित सोडियम क्लोराइड के विद्युतअपघटन के दौरान, 3 एम्पीयर की धारा का उपयोग करके क्लोरीन गैस का 0.10 मोल उत्पादित करने के लिए आवश्यक समय है

(1) 55 min      (2) 110 min

(3) 220 min    (4) 330 min

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

Standard free energies of formation (in kJ/mol) at 298 K are -237.2, -394.4 and -8.2 for H2O(l), CO2(g) and pentane (g), respectively. The value of E°cell for the pentane-oxygen fuel cell is

(1) 1.968 V

(2) 2.0968 V

(3) 1.0968 V

(4) 0.0968 V

298 K पर H2O(l), CO2(g) और पेंटेन (g) के लिए निर्माण की मानक मुक्त ऊर्जाएँ (kJ/mol में) क्रमश:  -237.2, -394.4 और -8.2 हैं। पेंटेन-ऑक्सीजन ईंधन सेल के लिए E°सेल मान है 

(1) 1.968 V

(2) 2.0968 V

(3) 1.0968 V

(4) 0.0968 V

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints