Aluminium phosphate is 100% ionized in 0.01m aqueous solution. Hence, Tb/kb is

1. 0.01

2. 0.015

3. 0.0175

4. 0.02

0.01% जलीय विलयन में ऐलुमिनियम फॉस्फेट 100% आयनित होता है। अत, Tb/kb है-

1. 0.01

2. 0.015

3. 0.0175

4. 0.02

Level 4: Below 35%

To unlock all the explanations of this course, you need to be enrolled.

Hints

In a dilute solution, any colligative property depends on 

1. The total number of neutral species in the solution

2. The total number of ionic species in the solution

3. The total number of species irrespective of whether they are ionic or non-ionic.

4. The types of forces operating between the non-ionic species, ionic species and the solvent molecules

 

एक तनु विलयन में, कोई भी अणुसंख्य गुणधर्म किस पर निर्भर करता है?

(1) विलयन में उदासीन स्पीशीज की कुल संख्या

(2) विलयन में आयनिक स्पीशीज की कुल संख्या

(3) चाहे वे आयनिक हों या अनायनिक हों के निरपेक्ष कुल स्पीशीज की संख्या।

(4) अनायनिक स्पीशीज, आयनिक स्पीशीज और विलायक अणुओं के मध्य कार्य करने वाले बलों के प्रकार

 

Level 3: 35%-60%

To unlock all the explanations of this course, you need to be enrolled.

Hints

Saturated solution of Ag2SO4 shows 0.003K rise in boiling point, Ksp will be :(Kb = 5 K kg mol-1)(1m=1M)

1. 3.2 x 10-11

2.  3.2 x 10-10

3.  3.2 x 10-9

4.  3.2 x 10-12

Ag2SO4 का संतृप्त विलयन क्वथनांक में 0.003K वृद्धि दर्शाता है, Ksp होगा: (Kb = 5 K kg mol-1)(1m=1M)

1. 3.2 x 10-11

2. 3.2 x 10-10

3. 3.2 x 10-9

4. 3.2 x 10-12

Level 4: Below 35%

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

The partial pressure of ethane over a saturated solution containing 6.56 X 10-2 g of ethane is 1 bar. If the solution contains 5.00 X 10-2 g of ethane, then what shall be the partial pressure of the gas.

1. 0.76 bar

2. 0.16 bar

3. 1.16 bar

4. 3.12 bar

एथेन के 6.56 X 10-2 g वाले संतृप्त विलयन पर एथेन का आंशिक दाब 1 bar है। यदि विलयन में 5.00 X 10-2 g एथेन होता है, तो गैस का आंशिक दाब क्या होगा।

(1) 0.76 bar

(2) 0.16 bar

(3) 1.16 bar

(4) 3.12 bar

Level 3: 35%-60%

To unlock all the explanations of this course, you need to be enrolled.

Hints

A solution containing 0.03659 g/ml of HCl and a solution containing 0.04509 g/ml of acetic acid Then:

(1) NHCl is more

(2)NCH3COOH is more

(3) Both have same normality

(4) None of these

विलयन जिसमें HCl का 0.03659 g/ml होता है और विलयन जिसमें एसीटिक अम्ल का 0.04509 g/ml होता है तब:

(1) NHCl अधिक है 

(2) NCH3COOH अधिक है

(3) दोनों में समान निर्मलता होती है

(4) इनमें से कोई नहीं

Level 4: Below 35%

To unlock all the explanations of this course, you need to be enrolled.

Hints

Osmotic pressure of equimolar solution of BaCl2, NaCl and glucose will be in the order -

1. BaCl> NaCl > glucose

2. glucose > NaCI > BaCl2

3. NaCl > BaCl2 >glucose

4. NaCl> glucose > BaCl2

BaCl2, NaCl और ग्लूकोज के सममोलर विलयन का परासरण दाब, निम्न क्रम में होगा-

(1) BaCl> NaCl > ग्लूकोज

(2) ग्लूकोज > NaCI > BaCl2

(3) NaCl > BaCl2 >ग्लूकोज

(4) NaCl> ग्लूकोज > BaCl2

 51%
Level 3: 35%-60%

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

Which solution has highest freezing point?

1. 1% glucose solution

2. 1% urea solution

3. 1% sucrose solution

4. All have same freezing

किस विलयन में उच्चतम हिमांक होता है?

1. 1% ग्लूकोज विलयन 

2. 1% यूरिया विलयन 

3. 1% सुक्रोज विलयन 

4. सभी में समान हिमांक होता है

Level 4: Below 35%

To unlock all the explanations of this course, you need to be enrolled.

Hints

Which of the following is dependent on temperature?

(1) Molality

(2) Molarity

(3) Mole fraction

(4) Weight percentage

निम्नलिखित में से कौन तापमान पर निर्भर है?

(1) मोललता 

(2) मोलरता 

(3) मोल अंश

(4) भार प्रतिशत

 70%
Level 2: 60%+

To unlock all the explanations of this course, you need to be enrolled.

Hints

0.5 molal aqueous solution of a weak acid (HX) is 20% ionised. If Kf for water is 1.86 K kg mol-1, the lowering in freezing point of the solution is:

(1) -1.12 K

(2) 0.56 K

(3) 1.12 K

(4) - 0.56 K

दुर्बल अम्ल (HX) का 0.5 मोलल जलीय विलयन 20% आयनित होता है। यदि जल के लिए Kf, 1.86 K  kg mol-1 है, विलयन के हिमांक में अवनमन है:

(1) -1.12 K

(2) 0.56 K

(3) 1.12 K

(4) - 0.56 K

Level 3: 35%-60%

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

Which of the following statements about the composition of the vapour over an ideal 1:1

molar mixture of benzene and toluene is correct? Assume that the temperature is

constant at 25°C.

(Given, vapour pressure data at 25°C, benzene = 12.8 kPa, toluene = 3.85 kPa)

1. The vapour will contain a higher percentage of toluene

2. The vapour will contain equal amounts of benzene and toluene

3. Not enough information is given to make a prediction

4. The vapour will contain a higher percentage of benzene

बेंजीन और टॉलूईन के एक आदर्श 1:1 मोलर मिश्रण पर वाष्प की संरचना के बारे में निम्नलिखित में से कौन सा कथन सही है? मान लीजिए कि तापमान 25°C पर स्थिर है।

( 25°C पर वाष्प दाब के आकड़े दिए गए हैं, बेंजीन = 12.8 kPa, टॉलूईन = 3.85 kPa)

(1) वाष्प में टॉलूईन का प्रतिशत अधिक होगा

(2) वाष्प में बेंजीन और टॉलूईन की समान मात्रा होगी

(3) अनुमानित करने के लिए पर्याप्त जानकारी नहीं दी गई है

(4) वाष्प में बेंजीन का प्रतिशत अधिक होगा

Level 3: 35%-60%

To unlock all the explanations of this course, you need to be enrolled.

Hints