A metallic rod of length l and cross-sectional area A is made of a material of Young's Modulus Y. If the rod is elongated by an amount y, then the work done is proportional to

1. y

2. $\frac{1}{\mathrm{y}}$

3. ${\mathrm{y}}^2$

4. $\frac{1}{{\mathrm{y}}^2}$

If the Bulk Modulus of lead is $8.0\times {10}^9 \mathrm{N}/{\mathrm{m}}^2$ and the initial density of the lead is 11.4 g/cc, then under the pressure of $2.0\times {10}^8 \mathrm{N}/{\mathrm{m}}^2$, the density of the lead is

1. 11.3 g/cc

2. 11.5 g/cc

3. 11.6 g/cc

4. 11.7 g/cc

For a given material, the Young's Modulus is 2.4 times its modulus of rigidity. Its Poisson's ratio is

1. 0.2

2. 0.4

3. 1.2

4. 2.4

When the temperature of a gas is constant at $20°\mathrm{C}$ and pressure is changed from ${\mathrm{P}}_1=1.01\times {10}^5 \mathrm{Pa}$ to ${\mathrm{P}}_2=1.165\times {10}^5 \mathrm{Pa}$, then the volume changes by 10%. The Bulk modulus of the gas is

1. $1.55\times {10}^5 \mathrm{Pa}$

2. $1.01\times {10}^5 \mathrm{Pa}$

3. $1.4\times {10}^5 \mathrm{Pa}$

4. $0.115\times {10}^5 \mathrm{Pa}$

The stress versus strain growth for wires of two materials A and B are as shown in the figure. If Y_A and Y_B are the Young's Moduli of the materials, then

1. ${\mathrm{Y}}_{\mathrm{B}}=2{\mathrm{Y}}_{\mathrm{A}}$

2. ${\mathrm{Y}}_{\mathrm{A}}=3{\mathrm{Y}}_{\mathrm{B}}$

3. ${\mathrm{Y}}_{\mathrm{B}}=3{\mathrm{Y}}_{\mathrm{A}}$

4. ${\mathrm{Y}}_{\mathrm{A}}={\mathrm{Y}}_{\mathrm{B}}$

When a rubber ball is taken to the bottom of a sea of depth 1400 m, its volume decreases by 2%. The Bulk Modulus of rubber ball is [density of water is 1 g cc and $\mathrm{g}=10 \mathrm{m}/{\mathrm{s}}^2$]

1. $7\times {10}^8 \mathrm{N}/{\mathrm{m}}^2$

2. $2\times {10}^8 \mathrm{N}/{\mathrm{m}}^2$

3. $2.5\times {10}^8 \mathrm{N}/{\mathrm{m}}^2$

4. $9\times {10}^8 \mathrm{N}/{\mathrm{m}}^2$

A spherical ball contracts in volume by 0.02%, when subjected to a normal uniform pressure of 50 atmosphere. The Bulk Modulus of its material is

1. $1\times {10}^{11} \mathrm{N}/{\mathrm{m}}^2$

2. $2\times {10}^{10} \mathrm{N}/{\mathrm{m}}^2$

3. $2.5\times {10}^{10} \mathrm{N}/{\mathrm{m}}^2$

4. $1\times {10}^{13} \mathrm{N}/{\mathrm{m}}^2$

For an elastic material

1. $\mathrm{\gamma }>\mathrm{\eta }$

2. $\mathrm{\gamma }<\mathrm{\eta }$

3. $\mathrm{\gamma \eta }=1$

4. $\mathrm{\gamma }=\mathrm{\eta }$

Correct pair is

1. Change in shape - Longitudinal strain

2. Change in volume - Shear strain

3. Change in length - Bulk strain

4. Reciprocal of Bulk Modulus - Compressibility

The breaking stress of aluminium is $7.5\times {10}^7 {\mathrm{Nm}}^{-2}$. The greatest length of aluminium wire that can hang vertically without breaking is
(Density of aluminium is $2.7\times {10}^3 \mathrm{kg} {\mathrm{m}}^{-3}$)

1. $283\times {10}^3 \mathrm{m}$

2. $28.3\times {10}^3 \mathrm{m}$

3. $2.83\times {10}^3 \mathrm{m}$

4. $0.283\times {10}^3 \mathrm{m}$