Two wires A and B of the same material, having radii in the ratio of 1: 2 carry currents in the ratio of 4: 1. The ratio of the drift speed of electrons in A and B is:

1. 16: 1

2. 1: 16

3. 1: 4

4. 4: 1

If a copper wire is stretched to make its radius decrease by 0.1%, then the percentage increase in resistance is nearly:

1. 0.1%

2. 0.8%

3. 0.4%

4. 0.2%

A certain piece of copper is to be shaped into a conductor of minimum resistance. Its length and diameter should respectively be:

1. L, D

2. 2L, $\frac{\mathrm{D}}{2}$

3. $\frac{\mathrm{L}}{2}$, 2D

4. $\mathrm{L}, \frac{\mathrm{D}}{2}$

A wire of resistance x ohm is drawn out so that its length is increased to twice its original length and its new resistance becomes $20\mathrm{\Omega }$, then x will be:

1. 5 $\mathrm{\Omega }$

2. 10 $\mathrm{\Omega }$

3. 15 $\mathrm{\Omega }$

4. 20 $\mathrm{\Omega }$

A piece of wire is cut into four equal parts and the pieces are bundled together side by side to form a thicker wire. Compared with that of the original wire, the resistance of the bundle is:

1. The same

2. $\frac{1}{16}$ as much

3. $\frac{1}{8}$ as much

4. $\frac{1}{4}$ as much

The temperature coefficient of resistance of a wire at $0°\mathrm{C}$ is $0.00125°{\mathrm{C}}^{-1}$. At $25°\mathrm{C}$, its resistance is one ohm. The resistance of the wire will be 1.2 ohms at:

1. 225 K

2. $190°\mathrm{C}$

3. $260°\mathrm{C}$ 

4. 185 K

At conductor behaves as a superconductor

1. Above the critical temperature

2. At the critical temperature

3. At $100°\mathrm{C}$

4. At the boiling point of that metal

A carbon resistor has coloured strips as shown in the figure. What is its resistance?

1. $410 \mathrm{\Omega }\pm 2\%$

2. $470 \mathrm{\Omega }\pm 5\%$

3. $420 \mathrm{\Omega }\pm 3\%$

4. $405 \mathrm{\Omega }\pm 2\%$

A wire has a resistance of 12 ohms. It is bent in the form of a circle. The effective resistance between the two points on any diameter of the circle is:

1. $12 \mathrm{\Omega }$

2. $24 \mathrm{\Omega }$

3. $3 \mathrm{\Omega }$

4. $6 \mathrm{\Omega }$

A technician has only two resistance coils. By using them singly, in series or in parallel, he is able to obtain the resistance 3, 4, 12 and 16 ohms. The resistance of the two coils are:

1. 6 and 10 ohms

2. 4 and 12 ohms

3. 7 and 9 ohms

4. 4 and 16 ohms