A 5 m long aluminium wire $\left(Y=7\times {10}^{10}N/m^2\right)$ of diameter 3 mm supports a 40 kg mass. In order to have the same elongation in a copper wire $\left(Y=12\times {10}^{10}N/m^2\right)$ of the same length under the same weight, the diameter should now be, in mm

1.   1.75                                  

2.   1.5

3.   2.5                                   

4.   5.0

An iron rod of length 2m and cross section area of 50 X ${10}^{-6}<mspace\; width="1em"></mspace>m^2$ , is stretched by 0.5 mm, when a mass of 250 kg is hung from its lower end. Young's modulus of the iron rod is-

1. $19.6\times {10}^{10}N/m^2$                         

2. $19.6\times {10}^{15}N/m^2$

3. $19.6\times {10}^{18}N/m^2$                         

4. $19.6\times {10}^{20}N/m^2$

In which case there is maximum extension in the wire, if same force is applied on each wire

1. L = 500 cm, d = 0.05 mm

2. L = 200 cm, d = 0.02 mm

3. L = 300 cm, d = 0.03 mm

4. L = 400 cm, d = 0.01 mm

The extension of a wire by the application of load is 3 mm. The extension in a wire of the same material and length but half the radius by the same load is -

1. 12 mm                                 

2. 0.75 mm

3. 15 mm

4. 6 mm

The adiabatic elasticity of a gas is equal to

1. $\gamma \times$density                               

2. $\gamma \times$volume

3. $\gamma \times$pressure                             

4. $\gamma \times$specific heat

The specific heat at constant pressure and at constant volume for an ideal gas are $C_p$ and $C_v$ and its adiabatic and isothermal elasticities are $E_{\varnothing }$ and$E_{\theta }$  respectively. The  ratio of $E_{\varnothing }$ to $E_{\theta }$ is

1. $C_v/C_p$

2. $C_p/C_v$

3. $C_p{C}_v$

4. $1/C_p{C}_v$

The compressibility of water is \(4\times 10^{-5}\) per unit atmospheric pressure. The decrease in volume of \(100\) cubic centimeter of water under a pressure of \(100\) atmosphere will be:
1. \(0.4~\text{cc}\)
2. \(4\times 10^{-5}~\text{cc}\)
3. \(0.025~\text{cc}\)
4. \(0.004~\text{cc}\)

If a rubber ball is taken at the depth of 200 m in a pool, its volume decreases by 0.1%. If the density of the water is $1\times {10}^{3}kg/m^3$ and $g=10m/s^2$, then the volume elasticity in  will be

1. ${10}^8$                                       

2. $2\times {10}^8$

3. ${10}^9$                                         

4. $2\times {10}^9$

When a pressure of 100 atmosphere is applied on a spherical ball, then its volume reduces by 0.01%. The bulk modulus of the material of the rubber in $dyne<mspace\; width="1em"></mspace>/<mspace\; width="1em"></mspace>c{m}^2$ is:

1. $10\times {10}^{12}$                               

2. $100\times {10}^{12}$

3. $1\times {10}^{12}$                                 

4. $20\times {10}^{12}$

A uniform cube is subjected to volume compression. If each side is decreased by \(1\%\), then bulk strain is: