In an LR-circuit, the inductive reactance is equal to the resistance R of the circuit. An e.m.f. $E=E_0\cos \left(\omega t\right)$ applied to the circuit. The power consumed in the circuit is:

(1) $\frac{E_0^2}{R}$

(2) $\frac{E_0^2}{2R}$

(3) $\frac{E_0^2}{4R}$

(4) $\frac{E_0^2}{8R}$

In the circuit shown in the figure, neglecting source resistance, the voltmeter and ammeter reading respectively will be:

1. 0 V, 3 A
2. 150 V, 3 A
3. 150 V, 6 A
4. 0 V, 8 A

An ac source of variable frequency f is connected to an LCR series circuit. Which of the following graphs represents the variation of the current I in the circuit with frequency f?

1.		2.
3.		4.

Which of the following plots may represent the reactance of a series LC combination 

(1) a

(2) b

(3) c

(4) d

In an ac circuit, I = 100 sin 200 $\mathrm{\pi t}$. The time required for the current to achieve its peak value will be

1. $\frac{1}{100}\sec$

2. $\frac{1}{200}\sec$

3. $\frac{1}{300}\sec$

4. $\frac{1}{400}\sec$

An inductor of \(20~\mathrm{mH},\) a capacitor of \(50~ \mu F,\) and a resistor of \(40~ \Omega\) are connected in series across a source of emf of \(V=10sin(340t).\) What will be the power loss in the AC circuit?

The rms value of potential difference V shown in the figure is

(1) ${\mathrm{V}}_{\mathrm{o}}$                                                     

(2) $\frac{{\mathrm{V}}_{\mathrm{o}}}{\sqrt{2}}$

(3)$\frac{{\mathrm{V}}_{\mathrm{o}}}{2}$                                                     

(4) $\frac{{\mathrm{V}}_{\mathrm{o}}}{\sqrt{3}}$   

A coil has resistance $30 \mathrm{\Omega }$ and inductive reactance $20 \mathrm{\Omega }$ at 50 Hz frequency. If an AC source of 200 V, 100 Hz, is connected across the coil, the current in the coil will be:

 1. $4.0 \mathrm{A}$                                          

 2. $8.0 \mathrm{A}$

 3. $\frac{20}{\sqrt{13}}\mathrm{A}$                                         

 4. $2.0 \mathrm{A}$