The input resistance of a silicon transistor is

100 Ω. Base current is changed by 40 μA

which results in a change in collector current

by 2 mA. This transistor is used as a common-

emitter amplifier with a load resistance of 4 kΩ.

The voltage gain of the amplifier is

1. 2000

2. 3000

3. 4000

4. 1000

Subtopic:  Transistor (OLD NCERT) |
 85%
From NCERT
NEET - 2012
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

 

If a small amount of antimony is added to germanium crystal

(1) the antimony becomes an acceptor atom

(2) there will be more free electrons than holes in the semiconductor

(3) its resistance is increased

(4) it becomes a p-type semiconductor

Subtopic:  Types of Semiconductors |
 83%
From NCERT
NEET - 2011
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In forward biasing of the p-n junction 

(1) the positive terminal of the battery is connected to n-side and the depletion region becomes thin

(2) the positive terminal of the battery is connected to n-side and the depletion region becomes thick

(3) the positive terminal of the battery is connected to p-side and the depletion region becomes thin

(4) the positive terminal of the battery is connected to p-side and the depletion region becomes thick

Subtopic:  PN junction |
 88%
From NCERT
NEET - 2011
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

advertisementadvertisement

A transistor is operated in common emitter configuration at VC=2 V such that a change in the base current from 100 μA to 300 μA produces a change in the collector current from 10 mA to 20 mA. The current gain is 

1. 75                                               2. 100

3. 25                                                4. 50

Subtopic:  Transistor (OLD NCERT) |
 85%
From NCERT
NEET - 2011
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In the following figure, the diodes which are forward biased, are

                                                                    

                                                                  

(1) C and D only

(2) A and C only

(3) B only

(4) Band D only

Subtopic:  PN junction |
 89%
From NCERT
NEET - 2011
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A Zener diode, having breakdown voltage equal to 15 V, is used in a voltage regulator circuit shown in the figure. The current through the diode is :

                      

1. 10 mA                                                    2. 15 mA

3. 20 mA                                                     4. 5 mA

 

 

Subtopic:  Applications of PN junction |
 61%
From NCERT
NEET - 2011
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

advertisementadvertisement

Which one of the following statement is false?

(1) Pure Si doped with trivalent impurities gives a p-type semiconductor 

(2) Majority carries in a n-type semiconductor are holes

(3) Minority carries in a p-type semiconductor are electrons

(4) The resistance of intrinsic semiconductor decreases with increase of temperature 

Subtopic:  Types of Semiconductors |
 87%
From NCERT
NEET - 2010
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

To get an output Y =1 from the circuit shown below, the input must be

        A     B     C

(1)   0      1     0

(2)   0      0     1

(3)   1      0     1

(4)   1      0     0

 

Subtopic:  Logic gates |
 95%
From NCERT
NEET - 2010
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The following figure shows a logic gate circuit with two inputs A and B and the output Y. The voltage waveforms of A, B and Y are as given

                            

The logic gate is 

(1) NOR gate                                                 

(2) OR gate

(3) AND  gate                                                 

(4) NAND gate

Subtopic:  Logic gates |
 76%
From NCERT
NEET - 2010
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

advertisementadvertisement

For transistor action

(1) Base, emitter and collector regions should have similar size and doping concentrations.

(2) The base regions must be very thin and lightly doped.

(3) The emitter-base junction is forward biased and the base-collector junction is reverse biased.

(4) Both the emitter-base junction as well as the base-collector junction are forward biased.

Which of the following pairs of statements is correct?

(a)   (4) and (1)                                       (b)   (1) and (2)

(c)   (2) and (3)                                       (d)    (3) and (4)

Subtopic:  Transistor (OLD NCERT) |
 86%
From NCERT
NEET - 2010
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh