Two circuits have coefficient of mutual induction of 0.09 henry. Average e.m.f. induced in the secondary by a change of current from 0 to 20 ampere in 0.006 second in the primary will be:
1. 120 V
2. 80 V
3. 200 V
4. 300 V
A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 20 A in 0.5 s, what is the change of flux linkage with the other coil?
1. 35 Wb
2. 25 Wb
3. 30 Wb
4. 20 Wb
With the decrease of current in the primary coil from 2 A to zero in 0.01 s, the e.m.f. generated in the secondary coil is \(1000~\mathrm{V}\). The mutual inductance of the two coils is:
1. 1.25 H
2. 2.50 H
3. 5.00 H
4. 10.00 H
The coefficient of mutual inductance between two coils depends upon:
1. | medium between coils |
2. | separation between coils |
3. | orientation of coils |
4. | All of these |
Two coils of 10 turns each are arranged such that the mutual inductance between them is 150 mH. The magnetic flux linked through one coil when 2 amperes current will flow in another coil, will be:
1.
2.
3.
4.
Two coaxial coils are very close to each other and their mutual inductance is 5 mH. If a current 50 sin 500t is passed in one of the coils, then the peak value of induced e.m.f. in the secondary coil will be:
1. | 5000 V | 2. | 500 V |
3. | 150 V | 4. | 125 V |
Two coils have a mutual inductance of 5 mH. The current changes in the first coil according to the equation \(I=I_{0}cos\omega t,\) where \(I_{0}=10~A\) and = 100 rad/s. The maximum value of e.m.f. induced in the second coil is:
1. 5 Volt
2. 2 Volt
3. 4 Volt
4. Volt
A small square loop of wire of side 'l' is placed inside a large square loop of side 'L' (Ll). If the loops are coplanar and their centres coincide, the mutual inductance of the system is directly proportional to:
1. L/l
2. l/L
3. L2/l
4. l2/L
Two circular coils can be arranged in any of the three situations shown in the figure. Their mutual inductance will be:
1. | maximum in the situation (A). |
2. | maximum in the situation (B). |
3. | maximum in the situation (C). |
4. | the same in all situations. |
A straight solenoid has 50 turns per cm in primary coil and 200 turns in the secondary coil. The area of cross-section of the solenoid is 4 cm2. Calculate the mutual inductance.
1. 5.0 H
2.
3. 2.5 H
4.