A and B are the inputs for the given logic gate. The output Y will be:
1. | 2. | ||
3. | 4. |
A Zener diode is shown in the following circuit diagram. When the source voltage fluctuates such that , then:
1. all the current I1, I2 and I3 change.
2. only I1 and I2 change and I3 remains constant.
3. only I1 and I3 change and I2 remains constant.
4. all the currents remain constant.
The net charges on -type semiconductor and -type semiconductor are, respectively:
1. Positive, negative
2. Negative, positive
3. Positive, positive
4. Zero, zero
In which of the following condition, diffusion current in junction is more than drift current?
1. | Forward biasing | 2. | Reverse biasing |
3. | No biasing | 4. | All of these |
What is the reading of the ideal ammeters A1 and A2 connected in the given circuit diagram, if junction diodes are ideal?
1. 2 A and zero
2. 3 A and 2 A
3. 2 A and 3 A
4. Zero and 2 A
If in a reverse-biased junction, an increase in carrier concentration takes place due to the creation of new hole-electron pairs by the light of wavelength less than or equal to 620 nm, then the bandgap is:
1. 1 eV
2. 2 eV
3. 20 eV
4. 0.2 eV
Which of the following graphs may correctly represent the variation of current (l) with potential difference (V) across a zener diode?
1. | 2. | ||
3. | 4. |
Which of the following statements is incorrect about LED?
1. | It requires a low operational voltage. |
2. | It has a fast on-off switching capability. |
3. | The bandwidth of the emitted light is 100 A to 10000 A. |
4. | It does not require warm-up time. |
A combination of logic gates is shown in the circuit. If \(A\) is at \(0\) V and \(B\) is at \(5\) V, then the potential of \(R\) is:
1. \(0\) V
2. \(5\) V
3. \(10\) V
4. Any of these
How many minimum number of NOR gates are required to obtain an AND gate?
1. One
2. Two
3. Three
4. Five