An inductor, a resistor and a capacitor are joined in series with an AC source. As the frequency of the source is slightly increased from a very low value, the reactance,

a. of the inductor increases.
b. of the resistor increases.
c. of the capacitor increases.
d. of the circuit increases.

Choose the correct option: 
1. (a) only
2. (b), (c)
3. (c), (d)
4. (a), (d)

Subtopic:  Different Types of AC Circuits |
 62%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The reactance of a circuit connected to an AC circuit is zero. It is possible that the circuit contains 

(a) an inductor and a capacitor
(b) an inductor but no capacitor
(c) a capacitor but no inductor
(d) neither an inductor nor a capacitor

Choose the correct option

1.  (a) only

2. (b), (c)

3. (c), (d)

4. (a), (d)

Subtopic:  Different Types of AC Circuits |
 56%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In an AC series circuit, the instantaneous current is zero when the instantaneous voltage is maximum. Connected to the source may be a:

(a) pure inductor.
(b) pure capacitor.
(c) pure resistor.
(d) combination of an inductor and a capacitor.

Choose the correct option:

1. (a), (b), (d)
2. (b), (c), (a)
3. (c), (d), (a)
4. (a), (d), (c), (b)

Subtopic:  Different Types of AC Circuits |
 71%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

An inductor-coil having some resistance is connected to an AC source. Which of the following quantities have zero average value over a cycle?

(a) current
(b) induced emf in the inductor
(c) Joule heat
(d) magnetic energy stored in the inductor

Choose the correct option 

1. (a) only

2. (b), (c)

3. (c), (d)

4. (a), (b)

Subtopic:  RMS & Average Values |
 53%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The AC voltage across a resistance can be measured using 

(a) a potentiometer
(b) a hot-wire voltmeter
(c) a moving-coil galvanometer
(d) a moving-magnet galvanometer

Choose the correct option 

1. (a), (b)

2. (b) only

3. (c), (d)

4. (a), (d)

Subtopic:  RMS & Average Values |
 65%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

To convert mechanical energy into electrical energy, one can use 

(a) DC dynamo
(b) AC dynamo
(c) motor
(d) transformer

Choose the correct option 

1. (a) only

2. (b), (c) 

3. (a), (b) 

4. (a), (d) 

Subtopic:  AC Generator |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

An AC source rated \(100~\mathrm{V}\) (rms) supplies a current of \(10~\mathrm{A}\) (rms) to a circuit. The average power delivered by the source:

(a) must be \(1000~\mathrm{W}\).
(b) may be \(1000~\mathrm{W}\).
(c) may be greater than \(1000~\mathrm{W}\).
(d) may be less than \(1000~\mathrm{W}\).


Choose the correct option:

1. (a) only
2. (b), (c)
3. (b), (d)
4. (a), (d)

Subtopic:  Power factor |
 61%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A constant current of 2.8 A exists in a resistor. The RMS current is

1.  2.8 A

2.  about 2 A

3.  1.4 A

4.  undefined for a direct current

Subtopic:  RMS & Average Values |
 52%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

An alternating current having peak value \(14\) A is used to heat a metal wire. To produce the same heating effect, a constant current \(i\) can be used, where \(i\) is:
1. \(14\) A
2. about \(20\) A
3. \(7\) A
4. about \(10\) A

Subtopic:  Power factor |
 65%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

An alternating current is given by 
\(i=i_1 \cos \omega t+i_2 \sin \omega t\)
The rms current is given by:

1.    \(\frac{i_{1}+i_{2}}{\sqrt{2}}\)

2.  \(\frac{\left|i_{1}-i_{2}\right|}{\sqrt{2}}\)

3.   \(\sqrt{\frac{i_{1}^{2}+i_{2}^{2}}{2}}\)

4.  \(\sqrt{\frac{i_{1}^{2}+i_{2}^{2}}{\sqrt{2}}}\)

Subtopic:  RMS & Average Values |
 83%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh