Six similar bulbs are connected as shown in the figure with a DC source of emf \(E\) and zero internal resistance. The ratio of power consumption by the bulbs when (i) all are glowing and (ii) in the situation when two from section \(\mathrm{A}\) and one from section \(\mathrm{B}\) are glowing, will be:

      

1.	\(2:1\)	2.	\(4:9\)
3.	\(9:4\)	4.	\(1:2\)

Which of the following acts as a circuit protection device?
1. Fuse
2. Conductor
3. Inductor
4. Switch

In the circuits shown below, the readings of the voltmeters and the ammeters will be:

The reading of an ideal voltmeter in the circuit shown is:

The metre bridge shown is in a balanced position with \(\frac{P}{Q} = \frac{l_1}{l_2}\). If we now interchange the position of the galvanometer and the cell, will the bridge work? If yes, what will be the balanced condition?

    
1. Yes, \(\frac{P}{Q}=\frac{l_1-l_2}{l_1+l_2}\)
2. No, no null point
3. Yes, \(\frac{P}{Q}= \frac{l_2}{l_1}\)
4. Yes, \(\frac{P}{Q}= \frac{l_1}{l_2}\)

Which of the following graph represents the variation of resistivity ($\rho$) with temperature (\(T\)) for copper?

1.		2.
3.		4.

A charged particle having drift velocity of \(7.5\times10^{-4}~\text{ms}^{-1}\) in an electric field of \(3\times10^{-10}~\text{Vm}^{-1}\), has mobility of: 
1. \(2.5\times 10^{6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
2. \(2.5\times 10^{-6}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
3. \(2.25\times 10^{-15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)
4. \(2.25\times 10^{15}~\text{m}^2\text{V}^{-1}\text{s}^{-1}\)

A resistance wire connected in the left gap of a meter bridge balances a \(10~\Omega\) $$ resistance in the right gap at a point which divides the bridge wire in the ratio \(3:2\). lf the length of the resistance wire is \(1.5~\text{m}\), then the length of \(1~\Omega\) of the resistance wire will be:
1. \(1.0\times 10^{-1}~\text{m}\) 
2. \(1.5\times 10^{-1}~\text{m}\)
3. \(1.5\times 10^{-2}~\text{m}\)
4. \(1.0\times 10^{-2}~\text{m}\)

For the circuit shown in the figure, the current \(I\) will be:

1. \(0.75~\text{A}\)
2. \(1~\text{A}\) 
3. \(1.5~\text{A}\)
4. \(0.5~\text{A}\)

Two solid conductors are made up of the same material and have the same length and the same resistance. One of them has a circular cross-section of area $A_1$ and the other one has a square cross-section of area $A_2$. The ratio $A_1/A_2$ is: