In a potentiometer circuit, a cell of emf \(1.5~\text{V}\) gives a balance point at 36 cm length of wire. If another cell of emf 2.5 V replaces the first cell, then at what length of the wire, the balance point occur? 
1. 64 cm 
2. 62 cm 
3. 60 cm 
4. 21.6 cm

The effective resistance of a parallel connection that consists of four wires of equal length, equal area of cross-section, and same material is \(0.25~\Omega\). What will be the effective resistance if they are connected in series?
1. \(1~\Omega\) 
2. \(4~\Omega\)
3. \(0.25~\Omega\)
4. \(0.5~\Omega\)

Three resistors having resistances \(r_1, r_2~\text{and}~r_3\) are connected as shown in the given circuit. The ratio \(\frac{i_3}{i_1}\) of currents in terms of resistances used in the circuit is:

  
1. \(\frac{r_1}{r_1+r_2}\)
2. \(\frac{r_2}{r_1+r_3}\)
3. \(\frac{r_1}{r_2+r_3}\)
4. \(\frac{r_2}{r_2+r_3}\)

Column-I gives certain physical terms associated with flow of current through a metallic conductor.

Column-II gives some mathematical relations involving electrical quantities.

Match Column-I and Column-II with appropriate relations.

The equivalent resistance between \(A\) and \(B\) for the mesh shown in the figure is:

For the circuit given below, Kirchhoff's loop rule for the loop \(BCDEB\) is given by the equation:

Two solid conductors are made up of the same material and have the same length and the same resistance. One of them has a circular cross-section of area $A_1$ and the other one has a square cross-section of area $A_2$. The ratio $A_1/A_2$ is:

For the circuit shown in the figure, the current \(I\) will be:

1. \(0.75~\text{A}\)
2. \(1~\text{A}\) 
3. \(1.5~\text{A}\)
4. \(0.5~\text{A}\)