The dimensions of \((\mu_0\varepsilon_0)^{\frac{-1}{2}}\) are:
1. \(\left[L^{-1}T\right]\)
2. \(\left[LT^{-1}\right]\)
3. \(\left[L^{{-1/2}}T^{{1/2}}\right]\)
4. \(\left[L^{{-1/2}}T^{{-1/2}}\right]\)

If \(y = a\sin(bt-cx)\), where \(y\) and \(x\) represent length and \(t\) represents time, then which of the following has the same dimensions as that of \(\frac{ab^2}{c}\)$\frac{\mathrm{}}{}$?
1. \((\text{speed})^2\)
2. \(\text{momentum}\)
3. \(\text{angle}\)
4. \(\text{acceleration}\)

We measure the period of oscillation of a simple pendulum. In successive measurements, the readings turn out to be 2.63 s, 2.56 s, 2.42 s, 2.71 s, and 2.80 s. The average absolute error and percentage error, respectively, are:

1.  0.22 s and 4%

2.  0.11 s and 4%

3.  4 s and 0.11%

4.  5 s and 0.22%

A screw gauge gives the following readings when used to measure the diameter of a wire:
Main scale reading: \(0\) mm
Circular scale reading: \(52\) divisions 
Given that \(1\) mm on the main scale corresponds to \(100\) divisions on the circular scale, the diameter of the wire that can be inferred from the given data is:
1. \(0.26\) cm 
2. \(0.052\) cm 
3. \(0.52\) cm 
4. \(0.026\) cm 

The mean length of an object is \(5~\text{cm}\). Which of the following measurements is the most accurate?
1. \(4.9~\text{cm}\)
2. \(4.805~\text{cm}\)
3. \(5.25~\text{cm}\)
4. \(5.4~\text{cm}\)

The numbers \(2.745\) and \(2.735\) on rounding off to \(3\) significant figures will give respectively, 

The mass and volume of a body are \(4.237~\mathrm{g}\) and \(2.5~\mathrm{cm^3}\), respectively. The density of the material of the body in correct significant figures will be:
1. \(1.6048~\mathrm{g~cm^{-3}}\)
2. \(1.69~\mathrm{g~cm^{-3}}\)
3. \(1.7~\mathrm{g~cm^{-3}}\)
4. \(1.695~\mathrm{g~cm^{-3}}\)

Which of the following measurements is the most precise?

1. 5.00 mm

2. 5.00 cm

3. 5.00 m

4. 5.00 km

Taking into account the significant figures, what is the value of \((9.99~\mathrm{m}-0.0099~\mathrm{m})\)?

A screw gauge has the least count of \(0.01~\mathrm{mm}\) and there are \(50\) divisions in its circular scale. The pitch of the screw gauge is:
1. \(0.25\) mm
2. \(0.5\) mm
3. \(1.0\) mm
4. \(0.01\) mm