The mass and volume of a body are \(4.237~\mathrm{g}\) and \(2.5~\mathrm{cm^3}\), respectively. The density of the material of the body in correct significant figures will be:
1. \(1.6048~\mathrm{g~cm^{-3}}\)
2. \(1.69~\mathrm{g~cm^{-3}}\)
3. \(1.7~\mathrm{g~cm^{-3}}\)
4. \(1.695~\mathrm{g~cm^{-3}}\)

The numbers \(2.745\) and \(2.735\) on rounding off to \(3\) significant figures will give respectively, 

The length and breadth of a rectangular sheet are 16.2 cm and 10.1 cm, respectively. The area of the sheet in appropriate significant figures and error would be, respectively,
1. 164 $\pm$ 3 ${\mathrm{cm}}^2$
2. 163.62 $\pm$ 2.6 ${\mathrm{cm}}^2$ 
3. 163.6 $\pm$ 2.6 ${\mathrm{cm}}^2$ 
4. 163.62 $\pm$ 3 ${\mathrm{cm}}^2$

The mean length of an object is \(5~\text{cm}\). Which of the following measurements is most accurate?
1. \(4.9~\text{cm}\)
2. \(4.805~\text{cm}\)
3. \(5.25~\text{cm}\)
4. \(5.4~\text{cm}\)

On the basis of dimensions, decide which of the following relations for the displacement of a particle undergoing simple harmonic motion is/are not correct.
a. \(y = a\sin \left(2\pi t / T\right)\)
b. \(y = a\sin(vt)\)
c. \(y = \left({a \over T}\right) \sin \left({t \over a}\right)\)
d. \(y = a \sqrt 2 \left(\sin \left({2 \pi t \over T}\right) - \cos \left({2 \pi t \over T}\right)\right)\)
(Symbols have their usual meanings.)
Choose the correct option:
1. (a), (c)
2. (a), (b)
3. (b), (c)
4. (a), (d)

The sum of the numbers \(436.32,227.2,\) and \(0.301\) in the appropriate significant figures is:

The density of a material in a CGS system of units is \(4~\text{g/cm}^3\). In a system of units in which the unit of length is \(10~\text{cm}\) and the unit of mass is \(100~\text{g}\), the value of the density of the material will be:
1. \( 0.04 \)
2. \( 0.4 \)
3. \( 40 \)
4. \(400\)

Which of the following measurements is the most precise?

1. 5.00 mm

2. 5.00 cm

3. 5.00 m

4. 5.00 km

The thickness of a pencil measured by using a screw gauge (least count \(0.001\) cm) comes out to be \(0.802\) cm. The percentage error in the measurement is:
1. \(0.125 \%\)
2. \(2.43\%\)
3. \(4.12\%\)
4. \(2.14\%\)

An object is moving through a liquid. The viscous damping force acting on it is proportional to the velocity. Then the dimensions of the constant of proportionality are:
1. \(\left[ML^{-1}T^{-1}\right]\)
2. \(\left[MLT^{-1}\right]\)
3. \(\left[M^0LT^{-1}\right]\)
4. \(\left[ML^{0}T^{-1}\right]\)