In an experiment, the percentage errors that occurred in the measurement of physical quantities \(A,\) \(B,\) \(C,\) and \(D\) are \(1\%\), \(2\%\), \(3\%\), and \(4\%\) respectively. Then, the maximum percentage of error in the measurement of \(X,\) where \(X=\frac{A^2 B^{\frac{1}{2}}}{C^{\frac{1}{3}} D^3}\), will be:
1. \(10\%\)
2. \(\frac{3}{13}\%\)
3. \(16\%\)
4. \(-10\%\)

The unit of thermal conductivity is:

A screw gauge gives the following reading when used to measure the diameter of a wire.

Main scale reading: 0 mm

Circular scale reading: 52 divisions

Given that 1 mm on main scale corresponds to 100 divisions of the circular scale.  The diameter of wire from the above data is:

(1) 0.052 cm

(2) 0.026 cm

(3) 0.005 cm

(4) 0.52 cm

The main scale of a vernier calliper has \(n\) divisions/cm. \(n\) divisions of the vernier scale coincide with \((n-1)\) divisions of the main scale. The least count of the vernier calliper is:
1. \(\frac{1}{(n+1)(n-1)}\) cm
2. \(\frac{1}{n}\) cm
3. \(\frac{1}{n^{2}}\) cm
4. \(\frac{1}{(n)(n+1)}\) cm

A screw gauge has the least count of \(0.01~\mathrm{mm}\) and there are \(50\) divisions in its circular scale. The pitch of the screw gauge is:
1. \(0.25\) mm
2. \(0.5\) mm
3. \(1.0\) mm
4. \(0.01\) mm

Taking into account the significant figures, what is the value of \((9.99~\mathrm{m}-0.0099~\mathrm{m})\)?

The energy required to break one bond in DNA is \(10^{-20}~\text{J}\). This value in eV is nearly: 
1. \(0.6\)
2. \(0.06\)
3. \(0.006\)
4. \(6\)

Dimensions of stress are:
1. \( {\left[\mathrm{ML}^2 \mathrm{~T}^{-2}\right]} \)
2. \( {\left[\mathrm{ML}^0 \mathrm{~T}^{-2}\right]} \)
3. \( {\left[\mathrm{ML}^{-1} \mathrm{~T}^{-2}\right]} \)
4. \( {\left[\mathrm{MLT}^{-2}\right]}\)

The angle of \(1'\) (minute of an arc) in radian is nearly equal to:
1. \(2.91 \times 10^{-4} ~\mathrm{rad} \)
2. \(4.85 \times 10^{-4} ~\mathrm{rad} \)
3. \(4.80 \times 10^{-6} ~\mathrm{rad} \)
4. \(1.75 \times 10^{-2} ~\mathrm{rad}\)

Time intervals measured by a clock give the following readings: 
\(1.25\) s, \(1.24\) s, \(1.27\) s, \(1.21\) s and \(1.28\) s. 
What is the percentage relative error of the observations? 
1. \(2\)%
2. \(4\)%
3. \(16\)%
4. \(1.6\)%