An alternating voltage of peak value \(200~\text V\) is applied to the primary \((A'B')\) of the transformer, in the circuit shown in the figure. The diodes \(D_1,D_2\) are ideal, and the transformer is also assumed to be ideal. The frequency is \(50~\text{Hz}.\)

The frequency of the pulsating current through the resistor is
1. \(500~\text{Hz}\) 2. \(100~\text{Hz}\)
3. \(\dfrac{50}{\pi}~\text{Hz}\) 4. \(50\sqrt2~\text{Hz}\)
Subtopic:  Rectifier |
 84%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

A full-wave rectifier circuit is shown along with its input and output. The contribution from the diode \(D_2\) is:
1. \(C\) 2. \(A\), \(C\)
3. \(B\), \(D\) 4. \(A\), \(B\), \(C\), \(D\)
Subtopic:  Rectifier |
 79%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

Match List-I with List-II.

 List-I List-II
\(\mathrm{(a)}\) Rectifier \(\mathrm{(i)}\) Used either for stepping up or stepping down the AC voltage.
\(\mathrm{(b)}\) Stabilizer \(\mathrm{(ii)}\) Used to convert AC voltage into DC voltage.
\(\mathrm{(c)}\) Transformer \(\mathrm{(iii)}\) Used to remove any ripple in the rectified output voltage.
\(\mathrm{(d)}\) Filter \(\mathrm{(iv)}\) Used for constant output voltage even when the input voltage or load current changes.

Choose the correct option from the given ones:

1. \(\mathrm{(a)–(ii), (b)–(iv), (c)–(i), (d)–(iii)}\)
2. \(\mathrm{(a)–(iii), (b)–(iv), (c)–(i), (d)–(ii)}\)
3. \(\mathrm{(a)–(ii), (b)–(i), (c)–(iv), (d)–(iii)}\)
4. \(\mathrm{(a)–(ii), (b)–(i), (c)–(iii), (d)–(iv)}\)
Subtopic:  Rectifier |
 77%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement