The temperature of the wire is doubled. Young's modulus of elasticity:

1. will also double.
2. will become four times.
3. will remain the same.
4. will decrease.
Subtopic:  Elasticity |
 59%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Consider two cylindrical rods of identical dimensions, one of rubber and the other of steel. Both the rods are fixed rigidly at one end of the roof. A mass M is attached to each of the free ends at the centre of the rods.
 

1. Both the rods will elongate but there shall be no perceptible change in shape.
2. The steel rod will elongate and change shape but the rubber rod will only elongate.
3. The steel rod will elongate without any perceptible change in shape but the rubber rod will elongate and the shape of the bottom edge will change to an ellipse.
4. The steel rod will elongate without any perceptible change in shape but the rubber rod will elongate with the shape of the bottom edge tapered to a tip at the centre.

Subtopic:  Elasticity |
 58%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A rod of length l and negligible mass is suspended at its two ends by two wires of steel (wire A) and aluminium (wire B) of equal lengths (figure). The cross-sectional areas of wires A and B are 1.0 mm2 and 2.0 mm2 respectively. (YAl=70×109 N/m2 and Ysteel=200×109 N/m2)



 

a. Mass m should be suspended close to wire A to have equal stresses in both wires.
b. Mass m should be suspended close to B to have equal stresses in both wires.
c. Mass m should be suspended in the middle of the wires to have equal stresses in both wires.
d. Mass m should be suspended close to wire A to have equal strain in both wires.

The correct statements are:

1. (b, c)

2. (a, d)

3. (b, d)

4. (c, d)

Subtopic:  Elasticity | Stress - Strain |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

advertisementadvertisement

For an ideal liquid,

(a) the bulk modulus is infinite.
(b) the bulk modulus is zero.
(c) the shear modulus is infinite.
(d) the shear modulus is zero.


Choose the correct option:

1. (a, d)
2. (b, d)
3. (b, c)
4. (c, d)

Subtopic:  Elasticity |
 64%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A copper and a steel wire of the same diameter are connected end to end. A deforming force \(F\) is applied to this composite wire which causes a total elongation of \(1\) cm. The two wires will have:

a. the same stress
b. different stress
c. the same strain
d. different strain

Choose the correct option:

1. (a, b)
2. (a, d)
3. (b, c)
4. (c, d)

Subtopic:  Elasticity | Stress - Strain |
 78%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh