If a force $\stackrel{\to }{\mathrm{F}}=\left(3\stackrel{^}{\mathrm{i}}+4\stackrel{^}{\mathrm{j}}-5\stackrel{^}{\mathrm{k}}\right)$ unit acts on a box and the displacement of the box is$\stackrel{\to }{\mathrm{d}}=\left(5\stackrel{^}{\mathrm{i}}+4\stackrel{^}{\mathrm{j}}+3\stackrel{^}{\mathrm{k}}\right)$ unit, the angle between force and displacement is:

1.   ${\mathrm{cos}}^{-1}\left(0.32\right)$

2.  $\frac{\mathrm{\pi }}{2}$

3.  0

4.  ${\mathrm{cos}}^{-1}\left(0.2\right)$

Subtopic:  Concept of Work |
60%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

It is well known that a raindrop falls under the influence of the downward gravitational force and the opposing resistive force. The latter is known to be proportional to the speed of the drop but is otherwise undetermined. Consider a drop of mass $$1.00$$ g falling from a height of $$1.00$$ km. It hits the ground with a speed of $$50.0$$ m/s. Work done by the gravitational force and work done by the unknown resistive force respectively are:

 1 $$-8.75$$ J and $$10$$ J 2 $$10$$ J and $$-8.75$$ J 3 $$0$$ J and $$2.26$$ J 4 $$-10$$ J and $$-10$$ J

Subtopic:  Concept of Work |
80%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A cyclist comes to a skidding stop in 10 m. During this process, the force on the cycle due to the road is 200 N and is directly opposed to the motion. Work done by the road on the cycle and work done by the cycle on the road respectively are:

1.   - 2000 J and 2000 J

2.   2000 J and - 2000 J

3.   0 J and 2000 J

4.   - 2000 J and 0 J

Subtopic:  Concept of Work |
52%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

In a ballistics demonstration, a police officer fires a bullet of mass $$50.0$$ g with speed $$200$$ m/s on soft plywood of thickness $$2.00$$ cm. The bullet emerges with only $$\text{10%}$$ of its initial kinetic energy. The emergent speed of the bullet is:
1. $$0$$
2. $$53.2$$ m/s
3. $$63.2$$ m/s
4. $$6.32$$ m/s

Subtopic:  Work Energy Theorem |
66%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A woman pushes a trunk on a railway platform which has a rough surface. She applies a force of $$100$$ N over a distance of $$10$$ m. Thereafter, she gets progressively tired and her applied force reduces linearly with distance to $$50$$ N. The total distance through which the trunk has been moved is $$20$$ m. The plot of force applied by the woman and the frictional force, which is $$50$$ N versus displacement is given below. Work done by the two forces over $$20$$ m are:

 1 $$1750$$ J and $$-1000$$ J 2 $$1750$$ J and $$1000$$ J 3 $$-1750$$ J and $$1000$$ J 4 $$-1750$$ J and $$-1000$$ J
Subtopic:  Work Done by Variable Force |
68%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A block of mass $$m=1$$ kg, moving on a horizontal surface with speed $$v_i=\mathrm{2~m/s}$$ enters a rough patch ranging from $$\mathrm{x=0.10~m}$$ to $$\mathrm{x=2.01~m}$$. The retarding force $$F_r$$ on the block in this range is inversely proportional to $$x$$ over this range,
\begin{aligned} \mathrm{F}_{\mathrm{r}} & =\frac{-\mathrm{k}}{\mathrm{x}} \text { for } 0.1<\mathrm{x}<2.01 \mathrm{~m} \\ & =0 \quad \text { for } \mathrm{x}<0.1 \mathrm{~m} \text { and } \mathrm{x}>2.01 \mathrm{~m} \end{aligned}
where $$k=0.5~\mathrm{J}$$. What is the final kinetic energy and speed $$v_f$$ of the block as it crosses this patch?
1. 5 J and 1 m/s
2. 1 J and 5 m/s
3. 0.5 J and 1 m/s
4. 0.05 J and 2 m/s

Subtopic:  Work Energy Theorem |
56%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A bob of mass m is suspended by a light string of length L. It is imparted a horizontal velocity ${\mathrm{v}}_{0}$ at the lowest point A such that it completes a semi-circular trajectory in the vertical plane with the string becoming slack only on reaching the topmost point, the horizontal velocity ${\mathrm{v}}_{0}$ is:

1.   $\sqrt{5\mathrm{gl}}$

2.   $\sqrt{4\mathrm{gl}}$

3.  $\sqrt{3\mathrm{gl}}$

4.   $\sqrt{\mathrm{gl}}$

Subtopic:  Work Energy Theorem |
66%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A bob of mass m is suspended by a light string of length $$L.$$ It is imparted a horizontal velocity $$v_0$$ at the lowest point A such that it completes a semi-circular trajectory in the vertical plane with the string becoming slack only on reaching the topmost point, the ratio of the kinetic energies $$\frac{K_B}{K_C}$$ ${\mathrm{}}_{}$at points $$\mathrm{B}$$ and $$\mathrm{C}$$ is:
${\mathrm{}}_{}$

1. $$1:3$$
2. $$3:1$$
3. $$1:5$$
4. $$5:1$$

Subtopic:  Work Energy Theorem |
77%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A bob of mass m is suspended by a light string of length L. It is imparted a horizontal velocity ${\mathrm{v}}_{0}$ at the lowest point A such that it completes a semi-circular trajectory in the vertical plane with the string becoming slack only on reaching the topmost point. If the connecting string is cut at point C, the trajectory of bob is:

1.   Straight line

2.   Circular

3.   Projectile

4.   Can't be determined

Subtopic:  Work Energy Theorem |
63%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

To simulate car accidents, auto manufacturers study the collisions of moving cars with mounted springs of different spring constants. Consider a typical simulation with a car of mass $$1000$$ kg moving with a speed $$18.0$$ km/h on a smooth road and colliding with a horizontally mounted spring of spring constant $$6.25\times 10^3~{\mathrm{N/m}}$$. The maximum compression in the spring is:
1. $$3$$ m
2. $$0.2$$ m
3. $$1$$ m
4. $$2$$ m

Subtopic:  Elastic Potential Energy |
72%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints