Q. No.For the logic circuit given below, the output \(Y\) for \(A=0,B=0\) and \(A=1,B=1\) are:
1. \(0\) and \(1\)
2. \(0\) and \(0\)
3. \(1\) and \(0\)
4. \(1\) and \(1\)
1. \(0\) and \(1\)
2. \(0\) and \(0\)
3. \(1\) and \(0\)
4. \(1\) and \(1\)
| 1. | becomes four times the initial value. |
| 2. | becomes one-fourth of the initial value. |
| 3. | remains unchanged. |
| 4. | becomes half of the initial value. |
A Zener diode is used to obtain a constant voltage. If the applied voltage \(V\) changes, then:
(\( V\) is more than Zener voltage)
| 1. | \(i_{1}\) and \(i_{2}\) change. |
| 2. | \(i_{2}\) and \( V_{0}\) change and \(i_{3}\) remain constant. |
| 3. | \(i_{2}\) and \(V_{0}\) don't change while \(i_{3}\) changes. |
| 4. | \(i_{3}\) and \( V_{0}\) don't change while \(i_{2}\) changes. |
A transistor circuit in a common emitter configuration is shown. The current gain is 100. If \(V_{BE}\approx 0,\) then \(V_{CE}\) is given by:
1. 6 V
2. 5 V
3. 4 V
4. 3 V
Which of the following-junction is used unbiased?
1. Photo diode
2. LED
3. Zener diode
4. Solar cell
1. \(36~\text{mW}\)
2. \(12~\text{mW}\)
3. \(144~\text{mW}\)
4. \(72~\text{mW}\)
An transistor having A.C. current gain of 50 is to be used to make an amplifier of voltage gain 6. What will be the power gain in the amplifier?
1. 300
2. 600
3. 750
4. 400
Current \(I_1\) through the Zener diode shown in the circuit is:
1. Zero
2. \(0.6\) mA
3. \(0.2\) mA
4. \(0.8\) mA
| 1. | only if both inputs are zero. |
| 2. | if either or both inputs are \(1\). |
| 3. | only if both inputs are \(1\). |
| 4. | if any of the inputs is zero. |
© 2025 GoodEd Technologies Pvt. Ltd.