A liquid is poured into three vessels of the same base area and equal heights as shown in the figure, then:
1. | Maximum force on the base will be for vessel C |
2. | Maximum force on the base will be for vessel B |
3. | Maximum force on the base will be for vessel A |
4. | Force on the base will be equal for all the vessels |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A liquid is filled in a container as shown in the figure. The force exerted by the liquid on the base of the container must be:
1. | Equal to the weight of the liquid |
2. | More than the weight of the liquid |
3. | Less than the weight of the liquid |
4. | More or less than the weight of the liquid |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The surface tension of a liquid is \(5\) N m-1. If a film is held on a ring of area \(0.02\) , then its total surface energy is:
1. \(3\times\) J
2. \(2\times\) J
3. \(3\times\) J
4. J
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A liquid filled in a container has plane meniscus. If is the angle of contact, then:
1. = \(0^\circ\)
2. = \(90^\circ\)
3. < \(90^\circ\)
4. = \(180^\circ\)
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The relative velocity of two adjacent layers of a liquid is 6 cm/s and the perpendicular distance between layers is 0.1 mm. The velocity gradient for liquid (in per second) is:
1. | 6 | 2. | 0.6 |
3. | 0.06 | 4. | 600 |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A large open tank with a square hole of side \(0.1\) cm in the wall at a depth of \(0.2\) m from the top is completely filled with a liquid. The rate of flow of liquid (in /s) through the hole will be:
1. | \(1\) | 2. | \(2\) |
3. | \(3\) | 4. | \(4\) |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The property of surface tension of the liquid is due to:
1. | the gravitational force of attraction between the molecules. |
2. | the cohesive forces between the molecules. |
3. | the adhesive force between the molecules. |
4. | the formation of ionic bonds between the molecules. |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
When a man sits on a boat of length 2 m and breadth 1 m floating on a lake, the boat sinks by 2 cm. The mass of the man is:
1. 25 kg
2. 40 kg
3. 60 kg
4. 80 kg
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
If two iron balls when fully immersed in water experience thrust force in the ratio of 1:2, then the ratio of the masses of the balls will be:
1. 1: 1
2. 1: 2
3. 2: 1
4. 1: 4
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
There are four cylindrical vessels identical in dimensions. If these are filled with equal masses of four different liquids P, Q, R, and S such that their densities are , then pressure at the base of vessel will be:
1. | 2. | ||
3. | 4. | Data is insufficient to predict the relation |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.