The quantities of heat required to raise the temperature of two solid copper spheres of radii \(r_1\) and \(r_2\) \((r_1=1.5~r_2)\) through \(1~\text{K}\) are in the ratio:

A deep rectangular pond of surface area \(A\), containing water (density = \(\rho,\) specific heat capacity = \(s\)), is located in a region where the outside air temperature is at a steady value of \(-26^{\circ}\text{C}\)$$. The thickness of the ice layer in this pond at a certain instant is \(x\). Taking the thermal conductivity of ice as \(k\), and its specific latent heat of fusion as \(L\), the rate of increase of the thickness of the ice layer, at this instant, would be given by:

Two rods \(A\) and \(B\) of different materials are welded together as shown in the figure. Their thermal conductivities are \(K_1\) and \(K_2.\) The thermal conductivity of the composite rod will be:
             

The two ends of a metal rod are maintained at temperatures \(100~^\circ\text{C}\) and \(110~^\circ\text{C}.\) The rate of heat flow in the rod is found to be \(4.0\) J/s. If the ends are maintained at temperatures \(200~^\circ \text{C}\) and \(210 ~^\circ \text{C},\) the rate of heat flow will be:

A slab of stone with an area \(0.36~\text{m}^{2}\)${\mathrm{}}^{}$ and thickness of \(0.1~\text{m}\) is exposed on the lower surface to steam at \(100​​^\circ\text{C}.\)$$ A block of ice at \(0^{\circ}\text{C}\) rests on the upper surface of the slab. In one hour \(4.8~\text{kg}\) of ice is melted. The thermal conductivity of the slab will be:
(Given latent heat of fusion of ice \(= 3.36\times10^{5}~\text{JKg}^{-1}\)${\mathrm{}}^{}$)
1. \(1.29~\text{J/m/s/}^{\circ}\text{C}\)
2. \(2.05~\text{J/m/s/}^{\circ}\text{C}\)
3. \(1.02~\text{J/m/s/}^{\circ}\text{C}\)
4. \(1.24~\text{J/m/s/}^{\circ}\text{C}\)

A cylindrical metallic rod in thermal contact with two reservoirs of heat at its two ends conducts an amount of heat Q in time t. The metallic rod is melted and the material is formed into a rod of half the radius of the original rod. What is the amount of heat conducted by the new rod when placed in thermal contact with the two reservoirs at the same time?

1. Q /4

2. Q/16

3. 2Q

4. Q/2

The two ends of a rod of length \(L\) and a uniform cross-sectional area \(A\) are kept at two temperatures \(T_1\text{ and }T_2~ (T_1> T_2).\) The rate of heat transfer \(\dfrac{dQ}{dt}\) through the rod in a steady state is given by:

1. \(\dfrac{dQ}{dt} = \dfrac{KL \left(\right. T_{1} - T_{2} \left.\right)}{A}\)

2. \(\dfrac{dQ}{dt} = \dfrac{K \left(\right. T_{1} - T_{2} \left.\right)}{LA}\)

3. \(\dfrac{dQ}{dt} = KLA \left(\right. T_{1} - T_{2} \left.\right)\)

4. \(\dfrac{dQ}{dt} = \dfrac{KA \left(\right. T_{1} - T_{2} \left.\right)}{L}\)