A ball falling into a lake of depth 200 m shows a 0.1% decrease in its volume at the bottom. What is the bulk modulus of the material of the ball?
1.
2.
3.
4.
The ratio of Young's modulus of the material of two wires is 2 : 3. If the same stress is applied on both, then the ratio of elastic energy per unit volume will be:
1. 3 : 2
2. 2 : 3
3. 3 : 4
4. 4 : 3
If \(\mathrm{E}\) is the energy stored per unit volume in a wire having \(\mathrm{Y}\) as Young's modulus of the material, then the stress applied is:
1.
2.
3.
4.
A uniform cube is subjected to volume compression. If each side is decreased by 1%, then bulk strain is:
1. | 0.01 | 2. | 0.06 |
3. | 0.02 | 4. | 0.03 |
The compressibility of water is per unit atmospheric pressure. The decrease in volume of 100 cubic centimeter of water under a pressure of 100 atmosphere will be:
1. 0.4 cc
2.
3. 0.025 cc
4. 0.004 cc
The length of an elastic string is \(a\) metre when the longitudinal tension is \(4\) N and \(b\) metre when the longitudinal tension is \(5\) N. The length of the string in metre when the longitudinal tension is \(9\) N will be:
1. | \(a-b\) | 2. | \(5b-4a\) |
3. | \(2b-\frac{1}{4}a\) | 4. | \(4a-3b\) |
A wire of negligible mass and length 2 m is stretched by hanging a 20 kg load to its lower end keeping its upper end fixed. If work done in stretching the wire is 50 J, then the strain produced in the wire will be:
1. 0.5
2. 0.1
3. 0.4
4. 0.25
The breaking stress of a wire depends on:
1. | Length of the wire |
2. | Applied force |
3. | The material of the wire |
4. | Area of the cross-section of the wire |
The increase in the length of a wire on stretching is \(0.04\)%. If Poisson's ratio for the material of wire is \(0.5,\) then the diameter of the wire will:
1. | \(0.02\)%. | decrease by2. | \(0.01\)%. | decrease by
3. | \(0.04\)%. | decrease by4. | \(0.03\)%. | increase by
A uniform wire of length \(3\) m and mass \(10\) kg is suspended vertically from one end and loaded at another end by a block of mass \(10\) kg. The radius of the cross-section of the wire is \(0.1\) m. The stress in the middle of the wire is: (Take \(g=10\) ms-2)
1. | \(1.4 \times10^4\) N/m2 | 2. | \(4.8 \times10^3\) N/m2 |
3. | \(96 \times10^4\) N/m2 | 4. | \(3.5\times10^3\) N/m2 |