For a transistor, the current amplification factor is 0.8 when it is connected in the common base configuration. The transistor is now connected in common emitter configuration. The change in the collector current when the base current changes by 6 mA, is:
1. 6 mA                       

2. 4.8 mA

3. 24 mA                     

4. 8 mA

Subtopic:  Applications of Transistor (OLD NCERT) |
 52%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In a common base amplifier circuit, calculate the change in base current if that in the emitter current is 2 mA and α = 0.98

(1) 0.04 mA                           

(2) 1.96 mA

(3) 0.98 mA                           

(4) 2 mA

Subtopic:  Transistor (OLD NCERT) |
 67%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

In a transistor circuit shown here the base current is 35 μA. The value of the resistor Rb is

(1) 123.5 kΩ

(2) 257 kΩ

(3) 380.05 kΩ 

(4) None of these

Subtopic:  Transistor (OLD NCERT) |
 82%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

For a transistor, in a common emitter arrangement, the alternating current gain β is given by

(1) β=IcIBVC                       

(2) β=IBICVC

(3) β=IcIEVC                       

(4) β=IEICVC

Subtopic:  Transistor (OLD NCERT) |
 87%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The relation between α and β parameters of current gains for a transistors is given by

(1) α=β1-β               

(2) α=β1+β

(3) α=1-ββ               

(4) α=1+ββ

Subtopic:  Transistor (OLD NCERT) |
 84%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In the CB mode of a transistor, when the collector emitter voltage is changed by 0.5 volt. The collector current changes by 0.05 mA. The output resistance will be 
(1) 10 kΩ                         

(2) 20 kΩ

(3) 5 kΩ                           

(4) 2.5 kΩ

Subtopic:  Transistor (OLD NCERT) |
 86%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Consider an NPN transistor amplifier in the common-emitter configuration. The current gain of the transistor is 100. If the collector current changes by 1 mA, what will be the change in emitter current?
1. 1.1 mA                     

2. 1.01 mA

3. 0.01 mA                   

4. 10 mA

Subtopic:  Transistor (OLD NCERT) |
 72%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In a common base amplifier the phase difference between the input signal voltage and the output voltage is

(1) 0                     

(2) π/4

(3)π/2                  

(4) π

Subtopic:  Transistor (OLD NCERT) |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In NPN transistor the collector current is 10 mA. If 90% of electrons emitted reach the collector, then

(1) Emitter current will be 9 mA

(2) Emitter current will be 11.1 mA

(3) Base current will be 0.1 mA

(4) Base current will be 0.01 mA

Subtopic:  Transistor (OLD NCERT) |
 79%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In a transistor in CE configuration, the ratio of power gain to voltage gain is 
(1) α                                     

(2) β/α 

(3) βα                                     

(4) β 

Subtopic:  Transistor (OLD NCERT) |
 75%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh