A liquid wets a solid completely. The meniscus of the liquid in a sufficiently long tube is
(a) Flat                                 (b) Concave
(c) Convex                            (d) Cylindrical

Concept Questions :-

Surface tension

Difficulty Level:

For which of the two pairs, the angle of contact is same

(a) Water and glass; glass and mercury

(b) Pure water and glass; glass and alcohol

(c) Silver and water; mercury and glass

(d) Silver and chromium; water and chromium

Concept Questions :-

Surface tension
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

If the surface of a liquid is plane, then the angle of contact of the liquid with the walls of container is
(a) Acute angle                (b) Obtuse angle
(c) 90°                            (d) 0°

Concept Questions :-

Surface tension
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

If two soap bubbles of different radii are in communication with each other

(a) Air flows from larger bubble into the smaller one

(b) The size of the bubbles remains the same

(c) Air flows from the smaller bubble into the large one and the larger bubble grows at the expense of the smaller one

(d) The air flows from the larger

Concept Questions :-

Surface tension
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

The surface tension of soap solution is  . The excess pressure inside a soap bubble of diameter 1 cm is

(a) 10 Pa                      (b) 20 Pa

(c) 5 Pa                        (d) None of the above

Concept Questions :-

Surface tension
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

When two soap bubbles of radius ${\mathrm{r}}_{1}$ and ${\mathrm{r}}_{2}$ (${\mathrm{r}}_{2}$>${\mathrm{r}}_{1}$) coalesce, the radius of curvature of common surface is

(a) ${\mathrm{r}}_{2}-{\mathrm{r}}_{1}$                       (b)  $\frac{{\mathrm{r}}_{2}-{\mathrm{r}}_{1}}{{\mathrm{r}}_{2}{\mathrm{r}}_{1}}$

(c) $\frac{{\mathrm{r}}_{2}{\mathrm{r}}_{1}}{{\mathrm{r}}_{2}-{\mathrm{r}}_{1}}$                          (d) ${\mathrm{r}}_{2}+{\mathrm{r}}_{1}$

Concept Questions :-

Surface tension

Difficulty Level:

The excess pressure due to surface tension in a spherical liquid drop of radius r is directly proportional to

(a) r                                 (b) ${\mathrm{r}}^{2}$

(c) ${\mathrm{r}}^{-1}$                               (d) ${\mathrm{r}}^{-2}$

Concept Questions :-

Surface tension

Difficulty Level:

A long cylindrical glass vessel has a small hole of radius 'r' at its bottom. The depth to which the vessel can be lowered vertically in the deep water bath (surface tension T) without any water entering inside is

(a) $4\mathrm{T}/\mathrm{r\rho g}$                   (b) $3\mathrm{T}/\mathrm{r\rho g}$

(c) $2\mathrm{T}/\mathrm{r\rho g}$                   (d) $\mathrm{T}/\mathrm{r\rho g}$

Concept Questions :-

Capillary rise
High Yielding Test Series + Question Bank - NEET 2020

Difficulty Level:

The excess of pressure inside a soap bubble than that of the outer pressure is

(a) $\frac{2\mathrm{T}}{\mathrm{r}}$                       (b) $\frac{4\mathrm{T}}{\mathrm{r}}$

(c) $\frac{\mathrm{T}}{2\mathrm{r}}$                         (d) $\frac{\mathrm{T}}{\mathrm{r}}$

Concept Questions :-

Surface tension

Difficulty Level:

The pressure of air in a soap bubble of 0.7cm diameter is 8 mm of water above the pressure outside. The surface tension of the soap solution is

(a) 100 dyne/cm                              (b) 68.66 dyne/cm
(c) 137 dyne/cm                              (d) 150 dyne/cm

Concept Questions :-

Surface tension