The dots in the figure depict a magnetic field that is perpendicular to the plane of the paper and emanates from it. The trajectory of a particle in the plane of the paper is depicted by the curve \(ABC\). What exactly is the particle?

                            

1.	Proton.	2.	Electron.
3.	Neutron.	4.	It cannot be predicted.

A long solenoid has 800 turns per meter length of the solenoid. A current of 1.6 A flows through it. The magnetic induction at the end of the solenoid on its axis is:

1.  $16\times {10}^{-4}<mspace\; width="1em"></mspace>\mathrm{T}$

2.  $8\times {10}^{-4}<mspace\; width="1em"></mspace>\mathrm{T}$

3.  $32\times {10}^{-4}<mspace\; width="1em"></mspace>\mathrm{T}$

4.  $4\times {10}^{-4}<mspace\; width="1em"></mspace>\mathrm{T}$

The unit of reduction factor of the tangent galvanometer is 

1. Ampere

2. Gauss

3. Radian

4. None of these

In order to pass 10% of the main current through a moving coil galvanometer of 99 ohms, the resistance of the required shunt is :

1. 9.9 Ω

2. 10 Ω

3. 11 Ω

4. 9 Ω

When a \(12~\Omega\) resistor is connected in parallel with a moving coil galvanometer, its deflection reduces from \(50\) divisions to \(10\) divisions. What will be the resistance of the galvanometer?
1. \(24~\Omega\)
2. \(36~\Omega\)
3. \(48~\Omega\)
4. \(60~\Omega\)

A voltmeter has a resistance of G ohms and range V volts. The value of resistance used in series to convert it into a voltmeter of range nV volts is :

1. nG

2. $(n-1)G$

3. $\frac{G}{n}$ 

4. $\frac{G}{(n-1)}$

Which of the following statement is wrong:

1. Voltmeter should have high resistance

2. Ammeter should have low resistance

3. Ammeter is placed in parallel across the conductor in a circuit

4. Voltmeter is placed in parallel across the conductor in a circuit

A moving coil galvanometer has a resistance of 50 Ωand gives full scale deflection for 10 mA. How could it be converted into an ammeter with a full scale deflection for 1A :

1. 50/99 Ω in series

2. 50/99 Ω in parallel

3. 0.01 Ω in series

4. 0.01 Ω in parallel

The resistance of an ideal voltmeter is 

1. Zero

2. Very low

3. Very large

4. Infinite

The net resistance of a voltmeter should be large to ensure that :