The ratio of the radii of two circular coils is \(1:2.\) The ratio of currents in the respective coils such that the same magnetic moment is produced at the centre of each coil is:
| 1. | \(4:1\) | 2. | \(2:1\) |
| 3. | \(1:2\) | 4. | \(1:4\) |
A gas undergoes an isothermal process. The specific heat capacity of the gas in the process is:
| 1. | infinity | 2. | \(0.5\) |
| 3. | zero | 4. | \(1\) |
A hollow metal sphere of radius \(R\) is given \(+Q\) charges to its outer surface. The electric potential at a distance \(\dfrac{R}{3}\) from the centre of the sphere will be:
| 1. | \(\dfrac{1}{4\pi \varepsilon_0}\dfrac{Q}{9R}\) | 2. | \(\dfrac{3}{4\pi \varepsilon_0}\dfrac{Q}{R}\) |
| 3. | \(\dfrac{1}{4\pi \varepsilon_0}\dfrac{Q}{3R}\) | 4. | \(\dfrac{1}{4\pi \varepsilon_0}\dfrac{Q}{R}\) |
| 1. | \(\left[M^2LT^{-2}A^{-2}\right]\) | 2. | \(\left[MLT^{-2}A^{2}\right]\) |
| 3. | \(\left[M^{2}L^{2}T^{-2}A^{2}\right]\) | 4. | \(\left[ML^{2}T^{-2}A^{-2}\right]\) |
The plot of current \(I~\text{(A)}\) flowing through a metallic conductor versus the applied voltage \(V~\text{(volt)}\) across the ends of a conductor is:
| 1. | |
2. | |
| 3. | 4. |
A network of resistors is connected across a \(10~\text{V}\) battery with an internal resistance of \(1~\Omega\) as shown in the circuit diagram. The equivalent resistance of the circuit is:
| 1. | \(\dfrac{17}{3}~\Omega\) | 2. | \(\dfrac{14}{3}~\Omega\) |
| 3. | \(\dfrac{12}{7}~\Omega\) | 4. | \(\dfrac{14}{7}~\Omega\) |
When a body of mass \(m\) just begins to slide as shown, match List-I with List-II:
| List-I | List-II | ||
| (a) | Normal reaction | (i) | \(P\) |
| (b) | Frictional force \((f_s)\) | (ii) | \(Q\) |
| (c) | Weight \((mg)\) | (iii) | \(R\) |
| (d) | \(mg \mathrm{sin}\theta ~\) | (iv) | \(S\) |
| (a) | (b) | (c) | (d) | |
| 1. | (ii) | (i) | (iii) | (iv) |
| 2. | (iv) | (ii) | (iii) | (i) |
| 3. | (iv) | (iii) | (ii) | (i) |
| 4. | (ii) | (iii) | (iv) | (i) |
| 1. | \(10~\text{J}\) | 2. | \(2.5~\text{J}\) |
| 3. | \(20~\text{J}\) | 4. | \(5~\text{J}\) |
A concave lens with a focal length of \(-25~\text{cm}\) is sandwiched between two convex lenses, each with a focal length of \(40~\text{cm}.\) The power (in diopters) of the combined lens system would be:
| 1. | \(55\) | 2. | \(9\) |
| 3. | \(1\) | 4. | \(0.01\) |
When the circular scale of a screw gauge completes \(2\) rotations, it covers \(1\) mm over the pitch scale. The total number of circular scale divisions is \(50.\) The least count of the screw gauge in metres is:
1. \(10^{-4}\)
2. \(10^{-5}\)
3. \(10^{-2}\)
4. \(10^{-3}\)