The quantities of heat required to raise the temperature of two solid copper spheres of radii \(r_1\) and \(r_2\) \((r_1=1.5~r_2)\) through \(1~\text{K}\) are in the ratio:
| 1. | \(\dfrac{9}{4}\) | 2. | \(\dfrac{3}{2}\) |
| 3. | \(\dfrac{5}{3}\) | 4. | \(\dfrac{27}{8}\) |
| 1. | \(\dfrac{3}{2}k_BT\) | 2. | \(\dfrac{5}{2}k_BT\) |
| 3. | \(\dfrac{7}{2}k_BT\) | 4. | \(\dfrac{1}{2}k_BT\) |
An AC voltage source is connected to a series \(LCR\) circuit. When \(L\) is removed from the circuit, the phase difference between current and voltage is \(\dfrac{\pi}{3}\). If \(C\) is instead removed from the circuit, the phase difference is again \(\dfrac{\pi}{3}\) between current and voltage. The power factor of the circuit is:
1. \(0.5\)
2. \(1.0\)
3. \(-1.0\)
4. zero
Two particles of mass \(5~\text{kg}\) and \(10~\text{kg}\) respectively are attached to the two ends of a rigid rod of length \(1~\text{m}\) with negligible mass. The centre of mass of the system from the \(5~\text{kg}\) particle is nearly at a distance of:
1. \(50~\text{cm}\)
2. \(67~\text{cm}\)
3. \(80~\text{cm}\)
4. \(33~\text{cm}\)
The phase difference between displacement and acceleration of a particle in a simple harmonic motion is:
1. \(\dfrac{3\pi}{2}\text{rad}\)
2. \(\dfrac{\pi}{2}\text{rad}\)
3. zero
4. \(\pi ~\text{rad}\)
The Brewster's angle for an interface should be:
1. \(30^{\circ}<i_b<45^{\circ}\)
2. \(45^{\circ}<i_b<90^{\circ}\)
3. \(i_b=90^{\circ}\)
4. \(0^{\circ}<i_b<30^{\circ}\)
Dimensions of stress are:
| 1. | \( {\left[{ML}^2 {T}^{-2}\right]} \) | 2. | \( {\left[{ML}^0 {T}^{-2}\right]} \) |
| 3. | \( {\left[{ML}^{-1} {T}^{-2}\right]} \) | 4. | \( {\left[{MLT}^{-2}\right]}\) |
The colour code of resistance is given below:
The values of resistance and tolerance, respectively are:
1. 47 k, 10%
2. 4.7 k, 5%
3. 470 , 5%
4. 470 k, 5%
A spherical conductor of radius \(10~\text{cm}\) has a charge of \(3.2 \times 10^{-7}~\text{C}\) distributed uniformly. What is the magnitude of the electric field at a point \(15~\text{cm}\) from the centre of the sphere?
\(\left(\frac{1}{4\pi \varepsilon _0} = 9\times 10^9~\text{N-m}^2/\text{C}^2\right)\)
1. \(1.28\times 10^{5}~\text{N/C}\)
2. \(1.28\times 10^{6}~\text{N/C}\)
3. \(1.28\times 10^{7}~\text{N/C}\)
4. \(1.28\times 10^{4}~\text{N/C}\)
What would be the torque about the origin when a force \(3\hat{j}~\text N\) acts on a particle whose position vector is \(2\hat{k}~\text m?\)
| 1. | \(6\hat{j}~\text{N-m}\) | 2. | \(-6\hat{i}~\text{N-m}\) |
| 3. | \(6\hat{k}~\text{N-m}\) | 4. | \(6\hat{i}~\text{N-m}\) |