$\begin{array}{l}\text{\hspace{0.17em}If\hspace{0.17em}}|\overrightarrow{\mathrm{A}}\times \overrightarrow{\mathrm{B}}|=\sqrt{3}\overrightarrow{\mathrm{A}}\cdot \overrightarrow{\mathrm{B}}\text{, then the value of\hspace{0.17em}}\\ |\overrightarrow{\mathrm{A}}+\overrightarrow{\mathrm{B}}|\text{\hspace{0.17em}is:\hspace{0.17em}}\end{array}$

1. ${({\mathrm{A}}^2+{\mathrm{B}}^2+\frac{\mathrm{AB}}{\sqrt{3}})}^{1/2}$

2. A+B

3. ${({\mathrm{A}}^2+{\mathrm{B}}^2+\sqrt{3}\mathrm{AB})}^{1/2}$

4. ${({\mathrm{A}}^2+{\mathrm{B}}^2+\mathrm{AB})}^{1/2}$

The coefficient of static friction, \(\mu_s,\) between block A of mass \(2\) kg and the table as shown in the figure is \(0.2\). What would be the maximum mass value of block B so that the two blocks do not move? The string and the pulley are assumed to be smooth and massless. (take \(g=10\) m/s² ) 

1. \(4.0\) kg
2. \(0.2\) kg
3. \(0.4\) kg
4. \(2.0\) kg

In a p–n junction photocell, the value of the photo electromotive force produced by monochromatic light is proportional to:

The output of the OR gate is \(1\):

A coil of \(40\) H inductance is connected in series with a resistance of \(8~\Omega\) and the combination is joined to the terminals of a \(2~\text{V}\) battery. The time constant of the circuit is:
1. \(1/5~\text{s}\)
2. \(40~\text{s}\)
3. \(20~\text{s}\)
4. \(5~\text{s}\)

One mole of an ideal gas at an initial temperature of \(T\) K does \(6R\) joules of work adiabatically. If the ratio of specific heats of this gas at constant pressure and at constant volume is \(5/3\), the final temperature of the gas will be:
1. \((T-2.4)\) K
2. \((T+4)\) K
3. \((T-4)\) K
4. \((T+2.4)\) K

A battery is charged at a potential of \(15\) V for \(8\) hours when the current flowing is \(10\) A. The battery on discharge supplies a current of \(5\) A for \(15\) hours. The mean terminal voltage during discharges is \(14\) V. The "Watt hour" efficiency of the battery is:
1. \(80\%\)
2. \(90\%\)
3. \(87.5\%\)
4. \(82.5\%\)

Five equal resistances each of resistance \(R\) are connected as shown in the figure below. A battery of \(V\) volts is connected between \(A\) and \(B\). The current flowing in \(AFCEB \) will be:

        

1. \(\dfrac{V}{R}\)

2. \(\dfrac{V}{2R}\)

3. \(\dfrac{2V}{R}\)

4. \(\dfrac{3V}{R}\)