The breaking stress of a wire depends on:

1. material of the wire
2. length of the wire
3. radius of the wire
4. shape of the cross-section

Subtopic:  Stress - Strain |
 82%
Level 1: 80%+
Hints

The dimension \([ML^{-1}T^{-2}]\) can correspond to:

1. moment of a force
2. surface tension
3. modulus of elasticity
4. coefficient of viscosity
Subtopic:  Young's modulus |
 83%
Level 1: 80%+
Hints

The longitudinal strain of a string equals twice the magnitude of its lateral strain. What is Poisson's ratio of the material of the string?
1. \(0.4\)
2. \(0.5\)
3. \(0.1\)
4. \(0.2\)

Subtopic:  Poisson's Ratio |
 89%
Level 1: 80%+
Hints

advertisementadvertisement

A wire of natural length \(L\) and cross-sectional area \(A\) is made of a material of Young’s modulus \(Y.\) If the wire is stretched by an amount \(x,\) the energy stored in the wire is:
1. \( \dfrac{Y A x^{2}}{L}\) 2. \( \dfrac{Y A x^{2}}{2 L}\)
3. \(\dfrac{2 Y A x^{2}}{L}\) 4. \(\dfrac{Y A x^{2}}{L^{2}}\)
Subtopic:  Potential energy of wire |
 89%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

A wire of length \(L\) and cross-sectional area \(A\) is made of a material of Young’s modulus \(Y.\) On stretching the length of the wire by \(l,\) the elastic energy stored per unit volume is:
1. \(\dfrac{FA}{2L}\) 2. \(\dfrac{Fl}{2AL}\)
3. \(\dfrac{Fl}{AL}\) 4. \(\dfrac{FL}{Al}\)
Subtopic:  Potential energy of wire |
 87%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

The Young's modulus of brass and steel are respectively \({1}\times{10}^{10}~\text{N/m}^2\) and \({2}\times{10}^{10}~\text{N/m}^2.\) A brass wire and a steel wire of the same length are extended by \(1~\text{mm}\) under the same force; the radii of brass and steel wires are \(R_B\) and \(R_S\) respectively. Then:
1. \({R}_{S}=\sqrt{2}{R}_{B}\) 2. \({R}_{S}=\dfrac{{R}_{B}}{\sqrt{2}}\)
3. \({R}_{S}={4}{R}_{B}\) 4. \({R}_{S}=\dfrac{{R}_{B}}{4}\)
Subtopic:  Young's modulus |
 84%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement

When a rubber is stretched, what happens to its energy?
1. Its kinetic energy increases.
2.  Its potential energy increases.
3. Its kinetic energy decreases.
4. Its potential energy decreases.
Subtopic:  Potential energy of wire |
 80%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

A metal cube is exposed to a hydrostatic pressure of \(4\) GPa. The bulk modulus of the metal is given as \(B=8\times 10^{10}~\text{Pa}.\) What is the percentage change in the volume of the cube?
1. \(2.5\)
2. \(5\)
3. \(7.5\)
4. \(10\)

Subtopic:  Shear and bulk modulus |
 88%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

Given below are two statements: 
Assertion (A): The bridges are declared unsafe after long use.
Reason (R): The bridges lose their elastic strength with time.
 
1. Both (A) and (R) are True and (R) is the correct explanation of (A).
2. Both (A) and (R) are True but (R) is not the correct explanation of (A).
3. (A) is True but (R) is False.
4. Both (A) and (R) are False.
Subtopic:  Elasticity |
 93%
Level 1: 80%+
Hints

advertisementadvertisement

Given below are two statements: 
Assertion (A): Identical springs of steel and copper are equally stretched. More work will be done on the steel spring.
Reason (R): Steel is more elastic than copper.
 
1. Both (A) and (R) are True and (R) is the correct explanation of (A).
2. Both (A) and (R) are True but (R) is not the correct explanation of (A).
3. (A) is True but (R) is False.
4. Both (A) and (R) are False.
Subtopic:  Potential energy of wire |
 87%
Level 1: 80%+
Hints