Which of the following is correct for the Zener diode?
(a) It acts as a voltage regulator.
(b) It is used in forward bias.
(c) It is used in reverse bias.
(d) It is used as a switch in series.

Choose the correct option from the given ones:
1. (a) and (d)
2. (b) and (c)
3. (a) and (c)
4. (b) and (d)

 
Subtopic:  Applications of PN junction |
 87%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

The advantages of LEDs are:

1. long lifespan
2. quick on-off switching
3. low operating voltage
4. all of the above
Subtopic:  Applications of PN junction |
 92%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

A Zener diode is specified having a breakdown voltage of \(8.1~\text{V}\) with a maximum power dissipation of \(346~\text{mW}\). The maximum current that diode can handle is: 
1. \(34~\text{mA}\) 
2. \(42.7~\text{mA}\) 
3. \(36.2~\text{mA}\)
4. \(52.6~\text{mA}\)
Subtopic:  Applications of PN junction |
 88%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement

The voltage across \(AB,\) \(V_{AB}=6\) to \(7~\text V,\) and it can vary. A \(5~\text V\)-Zener diode is to be connected between \(P,Q\) so that the voltage across the \(100~\Omega\) resistance is maintained at that value.
                   
After the \(5~\text V\)-Zener diode(s) is/are properly connected, the current through the \(100~\Omega\) resistor is:
1. \(5~\text A\)
2. \(0.05~\text A\)
3. \(0.025~\text A\)
4. \(0.1~\text A\)
Subtopic:  Applications of PN junction |
 88%
Level 1: 80%+

To unlock all the explanations of this course, you need to be enrolled.

Hints

To unlock all the explanations of this course, you need to be enrolled.


In the given circuit, the value of current, \(I_L\) is:
(where \(R_L = 1~\text{k} \Omega\))
     
1. \(2~\text{mA}\)
2. \(4~\text{mA}\)
3. \(3~\text{mA}\)
4. \(5~\text{mA}\)
Subtopic:  Applications of PN junction |
 87%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

If a semiconductor photodiode can detect a photon with a maximum wavelength of \(400~\text{nm},\) then the energy of its band gap is:
(take Planck’s constant \(h=6.63 \times 10^{-34} \text { J-s }\) and speed of light \(c=3 \times 10^8\) m/s)
1. \(3.1~\text{eV}\)
2. \(1.1~\text{eV}\)
3. \(2.0~\text{eV}\)
4. \(1.5~\text{eV}\)

Subtopic:  Applications of PN junction |
 88%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement

In the voltage regulator circuit shown below, the reverse breakdown voltage of the Zener diode is \(3~\text{V}.\)Then the current through the Zener diode is:
         
1. \(7~\text{mA}\)
2. \(1.5~\text{mA}\)
3. \(5.5~\text{mA}\)
4. \(10~\text{mA}\)
Subtopic:  Applications of PN junction |
 74%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

An LED is:
1. a \(\mathrm{p}\)-doped silicon that emits light
2. a \(\mathrm{n}\)-doped silicon that emits light
3. a \(\mathrm{p \text-n}\) diode that emits light
4. a transistor that absorbs light
Subtopic:  Applications of PN junction |
 83%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.

Which color LED contains the smallest band-gap?
1. Red 
2. Green 
3. Yellow 
4. Blue
Subtopic:  Applications of PN junction |
 78%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.

advertisementadvertisement

The \(V\text-I\) characteristics of a solar cell is shown in the figure. The points \(\mathrm{A}\) and \(\mathrm{B}\) are respectively called:
              
1. open circuit voltage; short circuit current
2. open circuit voltage; open circuit current
3. short circuit voltage; short circuit current
4. short circuit voltage; open circuit current
Subtopic:  Applications of PN junction |
 78%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.