- 1(current)
Q. No.An ideal liquid flows through a horizontal tube, as shown in the figure. The cross-sectional areas at ends \(A\) and \(B\) are \(2~\text{mm}^2\) and \(4~\text{mm}^2, \) respectively. If the velocity of the liquid at \(A\) is \(4~\text{m/s},\) the velocity of the liquid at \(B\) will be:
| 1. | \(4~\text{m/s}\) | 2. | \(2~\text{m/s}\) |
| 3. | \(8~\text{m/s}\) | 4. | \(1~\text{m/s}\) |
Subtopic: Â Equation of Continuity |
 87%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
A large open tank has two holes in the wall. One is a square hole of side \(L\) at a depth \(y\) from the top and the other is a circular hole of radius \(R\) at a depth of \(4y\) from the top. When the tank is completely filled with water, the quantity of water flowing out per second from both the holes is the same. Then \(R\) is equal to:
| 1. | \({2}\mathit{\pi}{L}\) | 2. | \(\dfrac{L}{\sqrt{{2}\mathit{\pi}}}\) |
| 3. | \(L\) | 4. | \(\dfrac{L}{{2}\mathit{\pi}}\) |
Subtopic: Â Equation of Continuity |
 84%
Level 1: 80%+
Please attempt this question first.
Hints
Please attempt this question first.
Water is flowing through a tube of the non-uniform cross-section. The ratio of the radius at the entry and exit end of the pipe is \(3:2\). Then the ratio of velocities at entry and exit of liquid is:
1. \(4:9\)
2. \(9:4\)
3. \(8:27\)
4. \(1:1\)
Subtopic: Â Equation of Continuity |
 82%
Level 1: 80%+
Hints
An incompressible liquid flows through a pipe of radius \(4\) cm. The flow rate is \(3.14\times 10^{-2}\) m3/s. What is the approximate average velocity of the fluid?
| 1. | \(2\) m/s | 2. | \(4\) m/s |
| 3. | \(5\) m/s | 4. | \(6\) m/s |
Subtopic: Â Equation of Continuity |
 75%
Level 2: 60%+
Please attempt this question first.
Hints
Please attempt this question first.
- 1(current)
Q. No.
© 2026 GoodEd Technologies Pvt. Ltd.