NCERT Ebook - Morphology of Flowering Plants

Unit  2

STRUCTURAL ORGANISATION IN PLANTS AND ANIMALS

Chapter 5

Morphology of Flowering Plants

Chapter 6

Anatomy of Flowering Plants

Chapter 7

Structural Organisation in Animals


The description of the diverse forms of life on earth was made only by observation – through naked eyes or later through magnifying lenses and microscopes. This description is mainly of gross structural features, both external and internal. In addition, observable and perceivable living phenomena were also recorded as part of this description. Before experimental biology or more specifically, physiology, was established as a part of biology, naturalists described only biology. Hence, biology remained as a natural history for a long time. The description, by itself, was amazing in terms of detail. While the initial reaction of a student could be boredom, one should keep in mind that the detailed description, was utilised in the later day reductionist biology where living processes drew more attention from scientists than the description of life forms and their structure. Hence, this description became meaningful and helpful in framing research questions in physiology or evolutionary biology. In the following chapters of this unit, the structural organisation of plants and animals, including the structural basis of physiologial or behavioural phenomena, is described. For convenience, this description of morphological and anatomical features is presented separately for plants and animals.


Katherine Esau

(1898 – 1997)

Katherine Esau was born in Ukraine in 1898. She studied agriculture in Russia and Germany and received her doctorate in 1931 in United States. She reported in her early publications that the curly top virus spreads through a plant via the food-conducting or phloem tissue. Dr Esau’s Plant Anatomy published in 1954 took a dynamic, developmental approach designed to enhance one’s understanding of plant structure and an enormous impact worldwide, literally bringing about a revival of the discipline. The Anatomy of Seed Plants by Katherine Esau was published in 1960. It was referred to as Webster’s of plant biology – it is encyclopediac. In 1957 she was elected to the National Academy of Sciences, becoming the sixth woman to receive that honour. In addition to this prestigious award, she received the National Medal of Science from President George Bush in 1989.

When Katherine Esau died in the year 1997, Peter Raven, director of Anatomy and Morphology, Missouri Botanical Garden, remembered that she ‘absolutely dominated’ the field of plant biology even at the age of 99.



Chapter 5


Morphology of Flowering Plants

5.1 The Root

5.2 The Stem

5.3 The Leaf

5.4 The Inflorescence

5.5 The Flower

5.6 The Fruit

5.7 The Seed

5.8 Semi-technical Description of a Typical Flowering Plant

5.9 Description of Some Important Families


The wide range in the structure of higher plants will never fail to fascinate us. Even though the angiosperms show such a large diversity in external structure or morphology, they are all characterised by presence of roots, stems, leaves, flowers and fruits.

In chapters 2 and 3, we talked about classification of plants based on morphological and other characteristics. For any successful attempt at classification and at understanding any higher plant (or for that matter any living organism) we need to know standard technical terms and standard definitions. We also need to know about the possible variations in different parts, found as adaptations of the plants to their environment, e.g., adaptions to various habitats, for protection, climbing, storage, etc.

If you pull out any weed you will see that all of them have roots, stems and leaves. They may be bearing flowers and fruits. The underground part of the flowering plant is the root system while the portion above the ground forms the shoot system (Figure 5.1).


5.1 The Root

In majority of the dicotyledonous plants, the direct elongation of the radicle leads to the formation of primary root which grows inside the soil.
It bears lateral roots of several orders that are referred to as
secondary, tertiary, etc. roots. The primary roots and its branches constitute the tap root system, as seen in the mustard plant (Figure 5.2a). In monocotyledonous plants, the primary root is short lived and is replaced by a large number of roots. These roots originate from the base of the stem and constitute the fibrous root system, as seen in the wheat plant (Figure 5.2b). In some plants, like grass, Monstera and the banyan tree, roots arise from parts of the plant other than the radicle and are called adventitious roots (Figure 5.2c). The main functions of the root system are absorption of water and minerals from the soil, providing a proper anchorage to the plant parts, storing reserve food material and synthesis of plant growth regulators.

Figure 5.1  Parts of a flowering plant
5.1
Figure 5.2 Different types of roots : (a) Tap  (b) Fibrous  (c) Adventitious

5.1.1 Regions of the Root

The root is covered at the apex by a thimble-like structure called the root cap (Figure 5.3). It protects the tender apex of the root as it makes its way through the soil. A few millimetres above the root cap is the region of meristematic activity. The cells of this region are very small, thin-walled and with dense protoplasm. They divide repeatedly. The cells proximal to this region undergo rapid elongation and enlargement and are responsible for the growth of the root in length. This region is called the region of elongation. The cells of the elongation zone gradually differentiate and mature. Hence, this zone, proximal to region of elongation, is called the region of maturation. From this region some of the epidermal cells form very fine and delicate, thread-like structures called root hairs. These root hairs absorb water and minerals from the soil.

Figure 5.3 The regions of the root-tip


5.1.2 Modifications of Root

Roots in some plants change their shape and structure and become modified to perform functions other than absorption and conduction of water and minerals. They are modified for support, storage of food and respiration (Figure 5.4 and 5.5). Tap roots of carrot, turnip and adventitious roots of sweet potato, get swollen and store food. Can you give some more such examples? Have you ever wondered what those hanging structures that support a banyan tree are? These are called prop roots. Similarly, the stems of maize and sugarcane have supporting roots coming out of the lower nodes of the stem. 

 

Figure 5.4 Modification of root for support: Banyan tree
These are called stilt roots. In some plants such as Rhizophora growing in swampy areas, many roots come out of the ground and grow vertically upwards. Such roots, called pneumatophores, help to get oxygen for respiration (Figure 5.5b).
 

Asparagus

 

Carrot      Sweet      potato

 

(a)

(b)

Figure 5.5 Modification of root for : (a) storage (b) respiration: pneumatophore in Rhizophora

 



5.2 The Stem

What are the features that distinguish a stem from a root? The stem is the ascending part of the axis bearing branches, leaves, flowers and fruits. It develops from the plumule of the embryo of a germinating seed. The stem bears nodes and internodes. The region of the stem where leaves are born are called nodes while internodes are the portions between two nodes. The stem bears buds, which may be terminal or axillary. Stem is generally green when young and later often become woody and dark brown.

The main function of the stem is spreading out branches bearing leaves, flowers and fruits. It conducts water, minerals and photosynthates. Some stems perform the function of storage of food, support, protection and of vegetative propagation.


5.2.1 Modifications of Stem

The stem may not always be typically like what they are expected to be. They are modified to perform different functions (Figure 5.6). Underground stems of potato, ginger, turmeric, zaminkand, Colocasia are modified to store food in them. They also act as organs of perennation to tide over conditions unfavourable for growth. Stem tendrils which develop from axillary buds, are slender and spirally coiled and help plants to climb such as in gourds (cucumber, pumpkins, watermelon) and grapevines. Axillary buds of stems may also get modified into woody, straight and pointed thorns. Thorns are found in many plants such as Citrus, Bougainvillea. They protect plants from browsing animals. Some plants of arid regions modify their stems into flattened (Opuntia), or fleshy cylindrical (Euphorbia) structures. 

5.6

Figure 5.6 Modifications of stem for :  (a) storage  (b) support  (c) protection (d) spread and vegetative propagation


They contain chlorophyll and carry out photosynthesis. Underground stems of some plants such as grass and strawberry, etc., spread to new niches and when older parts die new plants are formed. In plants like mint and jasmine a slender lateral branch arises from the base of the main axis and after growing aerially for some time arch downwards to touch the ground. A lateral branch with short internodes and each node bearing a rosette of leaves and a tuft of roots is found in aquatic plants like Pistia and Eichhornia. In banana, pineapple and Chrysanthemum, the lateral branches originate from the basal and underground portion of the main stem, grow horizontally beneath the soil and then come out obliquely upward giving rise to leafy shoots.




5.3 The Leaf

The leaf is a lateral, generally flattened structure borne on the stem. It develops at the node and bears a bud in its axil. The axillary bud later develops into a branch. Leaves originate from shoot apical meristems and are arranged in an acropetal order. They are the most important vegetative organs for photosynthesis.

A typical leaf consists of three main parts: leaf base, petiole and lamina (Figure 5.7 a). The leaf is attached to the stem by the leaf base and may bear two lateral small leaf like structures called stipules. In monocotyledons, the leaf base expands into a sheath covering the stem partially or wholly. In some leguminous plants the leafbase may become swollen, which is called the pulvinus. The petiole help hold the blade to light. Long thin flexible petioles allow leaf blades to flutter in wind, thereby cooling the leaf and bringing fresh air to leaf surface. The lamina or the leaf blade is the green expanded part of the leaf with veins and veinlets. There is, usually, a middle prominent vein, which is known as the midrib. Veins provide rigidity to the leaf blade and act as channels of transport for water, minerals and food materials. The shape, margin, apex, surface and extent of incision of lamina varies in different leaves.


5.4

(b)
(c)

Figure 5.7 Structure of a leaf : (a) Parts of a leaf (b) Reticulate venation (c) Parallel venation



5.3.1 Venation

The arrangement of veins and the veinlets in the lamina of leaf is termed as venation. When the veinlets form a network, the venation is termed as reticulate (Figure 5.7 b). When the veins run parallel to each other within a lamina, the venation is termed as parallel (Figure 5.7 c). Leaves of dicotyledonous plants generally possess reticulate venation, while parallel venation is the characteristic of most monocotyledons.

5.3.2 Types of Leaves

A leaf is said to be simple, when its lamina is entire or when incised, the incisions do not touch the midrib. When the incisions of the lamina reach up to the midrib breaking it into a number of leaflets, the leaf is called compound. A bud is present in the axil of petiole in both simple and compound leaves, but not in the axil of leaflets of the compound leaf.

(a)
(b)

 

Figure 5.8 Compound leaves : (a) pinnately compound leaf (b) palmately compound leaf

The compound leaves may be of two types (Figure 5.8). In a pinnately compound leaf a number of leaflets are present on a common axis, the rachis, which represents the midrib of the leaf as in neem.

In palmately compound leaves, the leaflets are attached at a common point, i.e., at the tip of petiole, as in silk cotton.

 

 (a) China rose

 

(b) Guava
(c) Alstonla

Figure 5.9 Different types of phyllotaxy : (a) Alternate (b) Opposite(c) Whorled

 

5.3.3 Phyllotaxy

Phyllotaxy is the pattern of arrangement of leaves on the stem or branch. This is usually of three types – alternate, opposite and whorled (Figure 5.9). In alternate type of phyllotaxy, a single leaf arises at each node in alternate manner, as in china rose, mustard and sun flower plants. In opposite type, a pair of leaves arise at each node and lie opposite to each other as in Calotropis and guava plants. If more than two leaves arise at a node and form a whorl, it is called whorled, as in Alstonia.


5.3.4 Modifications of Leaves

Leaves are often modified to perform functions other than photosynthesis. They are converted into tendrils for climbing as in peas or into spines for defence as in cacti (Figure 5.10 a, b). The fleshy leaves of onion and garlic store food (Figure 5.10c). In some plants such as Australian acacia, the leaves are small and short-lived. The petioles in these plants expand, become green and synthesise food. Leaves of certain insectivorous plants such as pitcher plant, venus-fly trap are also modified leaves.

5.3

Figure 5.10 Modifications of leaf for : (a) support: tendril (b) protection: spines (c) storage: fleshy leaves




5.4 The Inflorescence

A flower is a modified shoot wherein the shoot apical meristem changes to floral meristem. Internodes do not elongate and the axis gets condensed. The apex produces different kinds of floral appendages laterally at successive nodes instead of leaves. When a shoot tip transforms into a flower, it is always solitary. The arrangement of flowers on the floral axis is termed as inflorescence. Depending on whether the apex gets developed into a flower or continues to grow, two major types of inflorescences are defined – racemose and cymose. In racemose type of inflorescences the main axis continues to grow, the flowers are borne laterally in an acropetal succession (Figure 5.11).

Figure 5.11 Racemose inflorescence

In cymose type of inflorescence the main axis terminates in a flower, hence is limited in growth.The flowers are borne in a basipetal order (Figure 5.12).

Figure 5.12 Cymose inflorescence



5.5 The Flower

The flower is the reproductive unit in the angiosperms. It is meant for sexual reproduction. A typical flower has four different kinds of whorls arranged successively on the swollen end of the stalk or pedicel, called thalamus or receptacle. These are calyx, corolla, androecium and gynoecium. Calyx and corolla are accessory organs, while androecium and gynoecium are reproductive organs. In some flowers like lily, the calyx and corolla are not distinct and are termed as perianth. When a flower has both androecium and gynoecium, it is bisexual. A flower having either only stamens or only carpels is unisexual.

In symmetry, the flower may be actinomorphic (radial symmetry) or zygomorphic (bilateral symmetry). When a flower can be divided into two equal radial halves in any radial plane passing through the centre, it is said to be actinomorphic, e.g., mustard, datura, chilli. When it can be divided into two similar halves only in one particular vertical plane, it is zygomorphic, e.g., pea, gulmohur, bean, Cassia. A flower is asymmetric (irregular) if it cannot be divided into two similar halves by any vertical plane passing through the centre, as in canna.

A flower may be trimerous, tetramerous or pentamerous when the floral appendages are in multiple of 3, 4 or 5, respectively. Flowers  with bracts-reduced leaf found at the base of the pedicel-are called bracteate and those without bracts, ebracteate.


(a)                             (b)                                (c)                             (d)
Figure 5.13 Position of floral parts on thalamus : (a) Hypogynous (b) and (c) Perigynous (d) Epigynous

Based on the position of calyx, corolla and androecium in respect of the ovary on thalamus, the flowers are described as hypogynous, perigynous and epigynous (Figure 5.13). In the hypogynous flower the gynoecium occupies the highest position while the other parts are situated below it. The ovary in such flowers is said to be superior, e.g., mustard, china rose and brinjal. If gynoecium is situated in the centre and other parts of the flower are located on the rim of the thalamus almost at the same level, it is called perigynous. The ovary here is said to be half inferior, e.g., plum, rose, peach. In epigynous flowers, the margin of thalamus grows upward enclosing the ovary completely and getting fused with it, the other parts of flower arise above the ovary. Hence, the ovary is said to be inferior as in flowers of guava and cucumber, and the ray florets of sunflower.


5.5.1 Parts of a Flower

Each flower normally has four floral whorls, viz., calyx, corolla, androecium and gynoecium (Figure 5.14).


5.5.1.1 Calyx

The calyx is the outermost whorl of the flower and the members are called sepals. Generally, sepals are green, leaf like and protect the flower in the bud stage. The calyx may be gamosepalous (sepals united) or polysepalous (sepals free).


5.5.1.2 Corolla

Corolla is composed of petals. Petals are usually brightly coloured to attract insects for pollination. Like calyx, corolla may also be gamopetalous (petals united) or polypetalous (petals free). The shape and colour of corolla vary greatly in plants. Corolla may be tubular, bell-shaped, funnel-shaped or wheel-shaped.

5.7

Figure 5.14 Parts of a flower


Aestivation: The mode of arrangement of sepals or petals in floral bud with respect to the other members of the same whorl is known as aestivation. The main types of aestivation are valvate, twisted, imbricate and vexillary (Figure 5.15). When sepals or petals in a whorl just touch one another at the margin, without overlapping, as in Calotropis, it is said to be valvate. If one margin of the appendage overlaps that of the next one and so on as in china rose, lady’s finger and cotton, it is called twisted. If the margins of sepals or petals overlap one another but not in any particular direction as in Cassia and gulmohur, the aestivation is called imbricate. In pea and bean flowers, there are five petals, the largest (standard) overlaps the two lateral petals (wings) which in turn overlap the two smallest anterior petals (keel); this type of aestivation is known as vexillary or papilionaceous.


(a)      (b)      (c)       (d)

Figure 5.15 Types of aestivation in corolla : (a) Valvate (b) Twisted (c) Imbricate (d) Vexillary


5.5.1.3 Androecium

Androecium is composed of stamens. Each stamen which represents the male reproductive organ consists of a stalk or a filament and an anther. Each anther is usually bilobed and each lobe has two chambers, the pollen-sacs. The pollen grains are produced in pollen-sacs. A sterile stamen is called staminode.

Stamens of flower may be united with other members such as petals or among themselves. When stamens are attached to the petals, they are epipetalous as in brinjal, or epiphyllous when attached to the perianth as in the flowers of lily. The stamens in a flower may either remain free (polyandrous) or may be united in varying degrees. The stamens may be united into one bunch or one bundle (monoadelphous) as in china rose, or two bundles (diadelphous) as in pea, or into more than two bundles (polyadelphous) as in citrus. There may be a variation in the length of filaments within a flower, as in Salvia and mustard.

(a) Marginal

(b) Axile

(c) Parietal


(d) Free central


(e) Basal
Figure 5.16 Types of placentation :(a) Marginal (b) Axile (c) Parietal (d) Free central (e) Basa


5.5.1.4 Gynoecium

Gynoecium is the female reproductive part of the flower and is made up of one or more carpels. A carpel consists of three parts namely stigma, style and ovary. Ovary is the enlarged basal part, on which lies the elongated tube, the style. The style connects the ovary to the stigma. The stigma is usually at the tip of the style and is the receptive surface for pollen grains. Each ovary bears one or more ovules attached to a flattened, cushion-like placenta. When more than one carpel is present, they may be free (as in lotus and rose) and are called apocarpous. They are termed syncarpous when carpels are fused, as in mustard and tomato. After fertilisation, the ovules develop into seeds and the ovary matures into a fruit.

Placentation: The arrangement of ovules within the ovary is known as placentation. The placentation are of different types namely, marginal, axile, parietal, basal, central and free central (Figure 5.16). In marginal placentation the placenta forms a ridge along the ventral suture of the ovary and the ovules are borne on this ridge forming two rows, as in pea. When the placenta is axial and the ovules are attached to it in a multilocular ovary, the placentaion is said to be axile, as in china rose, tomato and lemon. In parietal placentation, the ovules develop on the inner wall of the ovary or on peripheral part. Ovary is one-chambered but it becomes two-chambered due to the formation of the false septum, e.g., mustard and argemone. When the ovules are borne on central axis and septa are absent, as in Dianthus and Primrose the placentation is called free central. In basal placentation, the placenta develops at the base of ovary and a single ovule is attached to it, as in sunflower, marigold.





5.6 The Fruit

The fruit is a characteristic feature of the flowering plants. It is a mature or ripened ovary, developed after fertilisation. If a fruit is formed without fertilisation of the ovary, it is called a parthenocarpic fruit.

Generally, the fruit consists of a wall or pericarp and seeds. The pericarp may be dry or fleshy. When pericarp is thick and fleshy, it is differentiated into the outer epicarp, the middle mesocarp and the inner endocarp.

5.8

Figure 5.17 Parts of a fruit : (a) Mango (b) Coconut

In mango and coconut, the fruit is known as a drupe (Figure 5.17). They develop from monocarpellary superior ovaries and are one seeded. In mango the pericarp is well differentiated into an outer thin epicarp, a middle fleshy edible mesocarp and an inner stony hard endocarp. In coconut which is also a drupe, the mesocarp is fibrous.




5.7 The Seed

The ovules after fertilisation, develop into seeds. A seed is made up of a seed coat and an embryo. The embryo is made up of a radicle, an embryonal axis and one (as in wheat, maize) or two cotyledons (as in gram and pea).


5.7.1 Structure of a Dicotyledonous Seed

The outermost covering of a seed is the seed coat. The seed coat has two layers, the outer testa and the inner tegmen. The hilum is a scar on the seed coat through which the developing seeds were attached to the fruit. Above the hilum is a small pore called the micropyle. Within the seed coat is the embryo, consisting of an embryonal axis and two cotyledons. The cotyledons are often fleshy and full of reserve food materials. At the two ends of the embryonal axis are present the radicle and the plumule (Figure 5.18). In some seeds such as castor the endosperm formed as a result of double fertilisation, is a food storing tissue and called endospermic seeds. In plants such as bean, gram and pea, the endosperm is not present in mature seeds and such seeds are called non-endospermous.


Figure 5.18 Structure of dicotyledonous seed


5.7.2 Structure of Monocotyledonous Seed

Generally, monocotyledonous seeds are endospermic but some as in orchids are non-endospermic. In the seeds of cereals such as maize the seed coat is membranous and generally fused with the fruit wall. The endosperm is bulky and stores food. The outer covering of endosperm separates the embryo by a proteinous layer called aleurone layer. The embryo is small and situated in a groove at one end of the endosperm. It consists of one large and shield shaped cotyledon known as scutellum and a short axis with a plumule and a radicle. The plumule and radicle are enclosed in sheaths which are called coleoptile and coleorhiza respectively (Figure 5.19).


Figure 5.19 Structure of a monocotyledonous seed




5.8 Semi-Technical Description of a Typical Flowering Plant

Various morphological features are used to describe a flowering plant. The description has to be brief, in a simple and scientific language and presented in a proper sequence. The plant is described beginning with its habit, vegetative characters – roots, stem and leaves and then floral characters inflorescence and flower parts. After describing various parts of plant, a floral diagram and a floral formula are presented. 

 K2+2 C4 A2+4 G(2)
Figure 5.20 Floral diagram with floral formula


The floral formula is represented by some symbols. In the floral formula, Br stands for bracteate K stands for calyx , C for corolla, P for perianth, A for androecium and G for Gynoecium, G for superior ovary and
for inferior ovary, for male, for female, for bisexual plants, for actinomorphic and

for zygomorphic nature of flower. Fusion is indicated by enclosing the figure within bracket and adhesion by a line drawn above the symbols of the floral parts. A floral diagram provides information about the number of parts of a flower, their arrangement and the relation they have with one another (Figure 5.20). The position of the mother axis with respect to the flower is represented by a dot on the top of the floral diagram. Calyx, corolla, androecium and gynoecium are drawn in successive whorls, calyx being the outermost and the gynoecium being in the centre. Floral formula also shows cohesion and adhesion within parts of whorls and between whorls. The floral diagram and floral formula in Figure 5.20 represents the mustard plant (Family: Brassicaceae).

 



5.9 Description of Some Important Families

5.9.1 Fabaceae

This family was earlier called Papilionoideae, a subfamily of family Leguminosae. It is distributed all over the world (Figure 5.21).

Vegetative Characters

Trees, shrubs, herbs; root with root nodules

Stemerect or climber

Leaves: alternate, pinnately compound or simple; leaf base, pulvinate; stipulate; venation reticulate.

5.9

Figure 5.21 Pisum sativum (pea) plant : (a) Flowering twig (b) Flower (c) Petals (d) Reproductive parts (e) L.S.carpel (f) Floral diagram


Floral characters

Inflorescence: racemose

Flower: bisexual, zygomorphic

Calyx: sepals five, gamosepalous; valvate/imbricate aestivation

Corolla: petals five, polypetalous, papilionaceous, consisting of a posterior standard, two lateral wings, two anterior ones forming a keel (enclosing stamens and pistil), vexillary aestivation

Androecium: ten, diadelphous, anther dithecous

Gynoecium: ovary superior, mono carpellary, unilocular with many ovules, style single

Fruit: legume; seed: one to many, non-endospermic

Floral formula:

K(5) C1+2+(2) A(9)+1 G1

Economic importance

Many plants belonging to the family are sources of pulses (gram, arhar, sem, moong, soyabean; edible oil (soyabean, groundnut); dye (Indigofera); fibres (sunhemp); fodder (Sesbania, Trifolium), ornamentals (lupin, sweet pea); medicine (muliathi).


5.9.2 Solanaceae

It is a large family, commonly called as the ‘potato family’. It is widely distributed in tropics, subtropics and even temperate zones (Figure 5.22).

Vegetative Characters

Plants mostly herbs, shrubs and rarely small trees

Stem: herbaceous rarely woody, aerial; erect, cylindrical, branched, solid or hollow, hairy or glabrous, underground stem in potato (Solanum tuberosum)

Figure 5.22 Solanum nigrum (makoi) plant : (a) Flowering twig (b) Flower (c) L.S. of flower (d) Stamens (e) Carpel (f) Floral diagram


Leaves: alternate, simple, rarely pinnately compound, exstipulate; venation reticulate

Floral Characters

Inflorescence : Solitary, axillary or cymose as in Solanum

Flower: bisexual, actinomorphic

Calyx: sepals five, united, persistent, valvate aestivation

Corolla: petals five, united; valvate aestivation

Androecium: stamens five, epipetalous

Gynoecium: bicarpellary obligately placed, syncarpous; ovary superior, bilocular, placenta swollen with many ovules, axile

Fruits: berry or capsule

Seeds: many, endospermous

Floral Formula:

Economic Importance

Many plants belonging to this family are source of food (tomato, brinjal, potato), spice (chilli); medicine (belladonna, ashwagandha); fumigatory (tobacco); ornamentals (petunia).



(a)
(b)
(c)
(d)

Figure 5.23 Allium cepa (onion) plant : (a) Plant (b) Inflorescence (c) Flower (d) Floral diagram


5.9.3 Liliaceae

Commonly called the ‘Lily family’ is a characteristic representative of monocotyledonous plants. It is distributed world wide (Figure 5.23).

Vegetative characters: Perennial herbs with underground bulbs/corms/rhizomes

Leaves mostly basal, alternate, linear, exstipulate with parallel venation

Floral characters

Inflorescence: solitary / cymose; often umbellate clusters

Flower: bisexual; actinomorphic

Perianth tepal six (3+3), often united into tube; valvate aestivation

Androecium: stamen six, 3+3, epitepalous

Gynoecium: tricarpellary, syncarpous, ovary superior, trilocular with many ovules; axile placentation

Fruit: capsule, rarely berry

Seed: endospermous

Floral Formula: Br P(3+3) A3+3 G(3)

Economic Importance

Many plants belonging to this family are good ornamentals (tulip, Gloriosa), source of medicine (Aloe), vegetables (Asparagus), and colchicine (Colchicum autumnale).

 

 

Summary

Flowering plants exhibit enormous variation in shape, size, structure, mode of nutrition, life span, habit and habitat. They have well developed root and shoot systems. Root system is either tap root or fibrous. Generally, dicotyledonous plants have tap roots while monocotyledonous plants have fibrous roots. The roots in some plants get modified for storage of food, mechanical support and respiration. The shoot system is differentiated into stem, leaves, flowers and fruits. The morphological features of stems like the presence of nodes and internodes, multicellular hair and positively phototropic nature help to differentiate the stems from roots. Stems also get modified to perform diverse functions such as storage of food, vegetative propagation and protection under different conditions. Leaf is a lateral outgrowth of stem developed exogeneously at the node. These are green in colour to perform the function of photosynthesis. Leaves exhibit marked variations in their shape, size, margin, apex and extent of incisions of leaf blade (lamina). Like other parts of plants, the leaves also get modified into other structures such as tendrils, spines for climbing and protection respectively.

The flower is a modified shoot, meant for sexual reproduction. The flowers are arranged in different types of inflorescences. They exhibit enormous variation in structure, symmetry, position of ovary in relation to other parts, arrangement of petals, sepals, ovules etc. After fertilisation, the ovary is modified into fruits and ovules into seeds. Seeds either may be monocotyledonous or dicotyledonous. They vary in shape, size and period of viability. The floral characteristics form the basis of classification and identification of flowering plants. This can be illustrated through semi-technical descriptions of families. Hence, a flowering plant is described in a definite sequence by using scientific terms. The floral features are represented in the summarised form as floral diagrams and floral formula.

 

 

Exercises

Q1. What is meant by modification of root? What type of modification of root is found in the:

(a) Banyan tree (b) Turnip (c) Mangrove trees

 

NEETprep Answer

 

Q2. Justify the following statements on the basis of external features:

(i) Underground parts of a plant are not always roots.

(ii) Flower is a modified shoot.

NEETprep Answer

 

Q3. How is a pinnately compound leaf different from a palmately compound leaf?

NEETprep Answer

Q4. Explain with suitable examples the different types of phyllotaxy.

 

NEETprep Answer

Q5. Define the following terms:

(a) aestivation

(b) placentation

(c) actinomorphic

(d) zygomorphic

(e) superior ovary

(f) perigynous flower

(g) epipetalous stamen

NEETprep Answer

 

Q6. Differentiate between

(a) Racemose and cymose inflorescence

(b) Fibrous root and adventitious root

(c) Apocarpous and syncarpous ovary

NEETprep Answer

Q7. Draw the labelled diagram of the following:

 (i) gram seed

(ii) V.S. of maize seed

NEETprep Answer

Q8. Describe modifications of stem with suitable examples.

NEETprep Answer

Q9. Take one flower each of the families Fabaceae and Solanaceae and write its semi-technical description. Also draw their floral

diagram after studying them.

NEETprep Answer

 

Q10. Describe the various types of placentations found in flowering plants.

NEETprep Answer

 

Q11. What is a flower? Describe the parts of a typical angiosperm flower.

 

NEETprep Answer

 

Q12. How do the various leaf modifications help plants?

NEETprep Answer

 

Q13. Define the term inflorescence. Explain the basis for the different types inflorescence in flowering plants.

NEETprep Answer

 

Q14. Write the floral formula of a actinomorphic, bisexual, hypogynous flower with five united sepals, five free petals, five free stamens

and two united carples with superior ovary and axile placentation.

NEETprep Answer

 

Q15. Describe the arrangement of floral members in relation to their insertion on thalamus.

NEETprep Answer

EXEMPLAR QUESTION

 

Multiple Choice Questions (MCQs)

 

1. Rearrange the following zones as seen in the root in vertical section and choose the correct option.

A. Root hair zone

B. Zone of meristems

C. Root cap zone

D. Zone of maturation

E. Zone of elongation

 

Codes

(a) C, B, E, A, D

(b) A, B, C, D, E

(c) D, E, A, C, B

(d) E, D, C, B, A

 

NEETprep Answer

 

 

2. In an inflorescence where flowers are borne laterally in an acropetal succession, the position of the youngest floral bud shall be

(a) proximal

(b) distal

(c) intercalary

(d) any where

 

NEETprep Answer

 

 

3. The mature seeds of plants such as gram and peas possess no endosperm, because

(a) these plants are not angiosperms

(b) there is no double fertilisation in them

(c) endosperm is not formed in them

(d) endosperm gets used up by the developing embryo during seed development

 

 

NEETprep Answer

 

 

4. Roots developed from parts of the plant other than radicle are called

(a) tap roots

(b) fibrous roots

(c) adventitious roots

(d) nodular roots

 

NEETprep Answer

 

 

5. Venation is a term used to describe the pattern of arrangement of

(a) floral organs

(b) flower in infloresence

(c) veins and veinlets in a lamina

(d) all of them

 

NEETprep Answer

 

 

 

6. Endosperm, a product of double fertilisation in angiosperms is absent in the seeds of

(a) Coconut

(b) Orchids

(c) Maize

(d) Castor

 

NEETprep Answer

 

 

7. Many pulses of daily use belong to one of the families below.

(a) Solanaceae

(b) Fabaceae

(c) Liliaceae

(d) Poaceae

 

NEETprep Answer

 

 

8. The placenta is attached to the developing seed near the

(a) testa

(b) hilum

(c) micropyle

(d) chalaza

 

NEETprep Answer

EXEMPLAR QUESTION

 

9. Which of the following plants is used to extract the blue dye?

(a) Trifolium

(b) Indigofera

(c) Lupin

(d) Cassia

 

NEETprep Answer

 

 

10.  Match the following columns.

Column I

Column II

A. Aleurone layer 

B. Parthenocarpic fruit 

C. Ovule

D. Endosperm 

1. Nutrition

2. Without fertilisation

3. Seed

4. Double fertilisation

Codes .

     A     B     C     D 

(a) 1     2     3     4

(b) 2     1     4     3

(c) 4      2     1     3

(d) 2      4     1     3

 

NEETprep Answer

 

 

Very Short Answer Type Questions

 

11. Roots obtain oxygen from air in the soil for respiration. In the absence or deficiency of O2 , root growth is restricted or completely stopped. How do the plants growing in marsh lands or swamps obtain their O2 required for root respiration?

 

NEETprep Answer

 

 

12. Write floral formula for a flower which is bisexual, actinomorphic sepals five, twisted aestivation, petals five valvate aestivation; stamens six, ovary tricarpellary, syncarpous, superior, trilocular with axile placentation.

 

NEETprep Answer

 

 

13. In Opuntia, the stem is modified into a flattened green structure to perform the function of leaves, (i.e., photosynthesis). Cite some other examples of modifications of plant parts for the purpose of photosynthesis.

 

NEETprep Answer

 

 

14. In swampy areas like the sunderbans in West Bengal, plants bear special kind of roots called .........

 

NEETprep Answer

 

 

15. In aquatic plants like Pistia and Eichhornia, leaves and roots are found near .........

 

NEETprep Answer

 

 

16. Reticulate and parallel venation are the characteristic of ........ and ......... respectively.

 

NEETprep Answer

EXEMPLAR QUESTION

 

16. Reticulate and parallel venation are the characteristic of ........ and ......... respectively.

 

NEETprep Answer

 

 

17. Which parts in ginger and onion are edible?

 

NEETprep Answer

 

 

18. In epigynous flower, ovary is situated below the......... .

 

NEETprep Answer

 

 

 

19. Add the missing floral organs of the given floral formula of Fabaceae.

% K() .......C()    A(9 + ....) G()

 

NEETprep Answer

 

 

 

20. Name the body part modified for food storage in the following

(a) Carrot .........

(b) Colocasia ..........

(c) Sweet potato ............

(d) Asparagus ..........

(e) Radish ...........

(f) Potato ..........

(g) Dahlia ...........

(h) Turmeric ..........

(i) Gladiolus ...........

(j) Ginger ............

(k) Portulaca ............

 

NEETprep Answer

 

 

Short Answer Type Questions

 

 

21. Give two examples of roots that develop from different parts of the angiospermic plant other than the radicle.

 

NEETprep Answer

 

 

22. The essential functions of roots are anchorage and absorption of water and minerals in the terrestrial plant. What functions are associated with the roots of aquatic plants. How areroots of aquatic plants and terrestrial plants different?

 

NEETprep Answer

 

 

23. Draw diagrams of a typical monocot and dicot leaves to show their venation pattern.

 

NEETprep Answer

 

 

24. A typical angiosperm flower consists of four floral parts. Give the names of the floral parts and their arrangements sequentially.

 

NEETprep Answer

EXEMPLAR QUESTION

 

25. Given below are a few floral formulae of some well known plants. Dray floral diagrams from these formulae.

(i)     K(5)   C(5)    A5   G(2)  

(ii) K(5)   C1+2+2    A(9)+1     G1

(iii)    K5     C5   A5 + 5    G(5)

 

NEETprep Answer

 

 

26. Reticulate venation is found in dicot leaves while in monocot leaves venation is of parallel type. Biology being a ‘Science of exceptions’, find out any exception to this generalisation.

 

NEETprep Answer

 

 

27. You have heard about several insectivorous plants that feed on insects. Nepenthes or the pitcher plant is one such example, which usually grows in shallow water or in marsh lands. What part of the plant is modified into a pitcher? How does this modification help the plant for food even though it can photosynthesise like any other green plant?

 

NEETprep Answer

 

 

 

28. Mango and coconutare ‘drupe’ type of fruits. In mango, fleshy mesocarp is edible. What is the edible part of coconut? What does milk of tender coconut represent?

 

NEETprep Answer

 

 

29. How can you differentiate between free central and axile placentation?

 

NEETprep Answer

 

 

30. Tendrils are found in the following plants. Identify whether they are stem tendrils of leaf tendrils.

(a) Cucumber

(b) Peas

(c) Pumpkins

(d) Grapevine

(e) Watermelon

 

NEETprep Answer

 

 

31. Why is maize grain usually called as a fruit and not a seed?

 

NEETprep Answer

 

 

32. Tendrils of grapevines are homologous to the tendril of pumpkins, but are analogous to that of pea. Justify the above statement.

 

NEETprep Answer

 

 

 

33. Rhizome of ginger is like the roots of other plants that grows underground. Despite this fact ginger is a stem and not a root. Justify.

 

NEETprep Answer

EXEMPLAR QUESTION

 

34. Differentiate between

(a) Bract and bracteole

(b) Pulvinus and petiole

(c) Pedicel and peduncle

(d) Spike and spadix

(e) Stamen and staminoid

(f) Pollen and pollenium

 

NEETprep Answer

 

 

Long Answer Type Questions

 

35. Distinguish between families - Fabaceae, Solanaceae, Liliaceae on the gynoecium characteristics (with figures). Also write economic importance of any one of the above family.

 

NEETprep Answer

 

 

36. Describe various stem modifications associated with food storage climbing and protection.

 

NEETprep Answer

 

 

37. Stolon, offset and rhizome are different forms of stem modifications. How can these modified forms of stem be distinguished from each other?

 

NEETprep Answer

 

 

38. The mode of arrangement of sepals or petals in a floral bud is known as aestivation. Draw the various types of aestivation possible for a typical pentamerous flower.

 

NEETprep Answer

 

 

39. The arrangement of ovules within the ovary is known as placentation. What does the term placenta refer to? Name and draw various types of placentations in the flower as seen in T.S. or V.S.

 

NEETprep Answer

 

 

40. Sunflower is not a flower. Explain.

 

NEETprep Answer

 

 

41. How do you distinguish between hypogeal germination and epigeal germination? What is the role of cotyledon(s) and the endosperm in the germination of seeds?

 

NEETprep Answer

 

 

42. Seeds of some plants germinate immediately after shedding from the plants while in other plants they require a period of rest before germination. The later phenomena is called as dormancy. Give the reasons for seed dormancy and some methods to break it.

 

NEETprep Answer