NCERT Ebook - Organic Chemistry - Some Basic Principles And Techniques

Chemistrypart2-005

UNIT 12

 

Organic Chemistry – Some Basic Principles and Techniques

 
Objectives
After studying this unit, you will be able to

understand reasons for tetravalence of carbon and shapes of organic molecules;

write structures of organic molecules in various ways;

classify the organic compounds;

name the compounds according to IUPAC system of nomenclature and also derive their structures from the given names;

understand the concept of organic reaction mechanism;

explain the influence of electronic displacements on structure and reactivity of organic compounds;

recognise the types of organic reactions;

learn the techniques of purification of organic compounds;

write the chemical reactions involved in the qualitative analysis of organic compounds;

understand the principles involved in quantitative analysis of organic compounds.

 In the previous unit you have learnt that the element carbon has the unique property called catenation due to which it forms covalent bonds with other carbon atoms. It also forms covalent bonds with atoms of other elements like hydrogen, oxygen, nitrogen, sulphur, phosphorus and halogens. The resulting compounds are studied under a separate branch of chemistry called organic chemistry. This unit incorporates some basic principles and techniques of analysis required for understanding the formation and properties of organic compounds.

12.1 General Introduction

 Organic compounds are vital for sustaining life on earth and include complex molecules like genetic information bearing deoxyribonucleic acid (DNA) and proteins that constitute essential compounds of our blood, muscles and skin. Organic compounds appear in materials like clothing, fuels, polymers, dyes and medicines. These are some of the important areas of application of these compounds.

Science of organic chemistry is about two hundred years old. Around the year 1780, chemists began to distinguish between organic compounds obtained from plants and animals and inorganic compounds prepared from mineral sources. Berzilius, a Swedish chemist proposed that a ‘vital force’ was responsible for the formation of organic compounds. However, this notion was rejected in 1828 when F. Wohler synthesised an organic compound, urea from an inorganic compound, ammonium cyanate.

image

The pioneering synthesis of acetic acid by Kolbe (1845) and that of methane by Berthelot (1856) showed conclusively that organic compounds could be synthesised from inorganic sources in a laboratory.

The development of electronic theory of covalent bonding ushered organic chemistry into its modern shape.



12.2 TETRAVALENCE OF CARBON: SHAPES OF ORGANIC COMPOUNDS


12.2.1 The Shapes of Carbon Compounds

 The knowledge of fundamental concepts of molecular structure helps in understanding and predicting the properties of organic compounds. You have already learnt theories of valency and molecular structure in Unit 4. Also, you already know that tetravalence of carbon and the formation of covalent bonds by it are explained in terms of its electronic configuration and the hybridisation of s and p orbitals. It may be recalled that formation and the shapes of molecules like methane (CH4), ethene (C2H4), ethyne (C2H2) are explained in terms of the use of sp3, sp2 and sp hybrid orbitals by carbon atoms in the respective molecules.

Hybridisation influences the bond length and bond enthalpy (strength) in compounds. The sp hybrid orbital contains more s character and hence it is closer to its nucleus and forms shorter and stronger bonds than the sp3 hybrid orbital. The sp2 hybrid orbital is intermediate in s character between sp and sp3 and, hence, the length and enthalpy of the bonds it forms, are also intermediate between them. The change in hybridisation affects the electronegativity of carbon. The greater the s character of the hybrid orbitals, the greater is the electronegativity. Thus, a carbon atom having an sp hybrid orbital with 50% s character is more electronegative than that possessing sp2 or sp3 hybridised orbitals. This relative electronegativity is reflected in several physical and chemical properties of the molecules concerned, about which you will learn in later units.

 

12.2.2 Some Characteristic Features of π Bonds

 In a π (pi) bond formation, parallel orientation of the two p orbitals on adjacent atoms is necessary for a proper sideways overlap. Thus, in H2C=CH2 molecule all the atoms must be in the same plane. The p orbitals are mutually parallel and both the p orbitals are perpendicular to the plane of the molecule. Rotation of one CH2 fragment with respect to other interferes with maximum overlap of p orbitals and, therefore, such rotation about carbon-carbon double bond (C=C) is restricted. The electron charge cloud of the π bond is located above and below the plane of bonding atoms. This results in the electrons being easily available to the attacking reagents. In general, π bonds provide the most reactive centres in the molecules containing multiple bonds.

 

Problem 12.1

How many σ and π bonds are present in each of the following molecules?

(a) HCCCH=CHCH3 (b) CH2=C=CHCH3

 

Solution

(a) σC – C: 4; σC–H : 6; πC=C :1; π CC:2

(b) σC – C: 3; σC–H: 6; πC=C: 2.

Problem 12.2

What is the type of hybridisation of each carbon in the following compounds?

(a) CH3Cl, (b) (CH3)2CO, (c) CH3CN,

(d) HCONH2, (e) CH3CH=CHCN
 

Solution

(a) sp3, (b) sp3, sp2, (c) sp3, sp, (d) sp2, (e) sp3, sp2, sp2, sp

Problem 12.3

Write the state of hybridisation of carbon in the following compounds and shapes of each of the molecules.

(a) H2C=O, (b) CH3F, (c) HCN.

Solution

(a) sp2 hybridised carbon, trigonal planar; (b) sp3 hybridised carbon, tetrahedral; (c) sp hybridised carbon, linear.

 



12.3 STRUCTURAL RepresenTATIONS OF organic COMPOUNDs

 

12.3.1 Complete, Condensed and Bond-line Structural Formulas

 Structures of organic compounds are represented in several ways. The Lewis structure or dot structure, dash structure, condensed structure and bond line structural formulas are some of the specific types. The Lewis structures, however, can be simplified by representing the two-electron covalent bond by a dash (–). Such a structural formula focuses on the electrons involved in bond formation. A single dash represents a single bond, double dash is used for double bond and a triple dash represents triple bond. Lone-pairs of electrons on heteroatoms (e.g., oxygen, nitrogen, sulphur, halogens etc.) may or may not be shown. Thus, ethane (C2H6), ethene (C2H4), ethyne (C2H2) and methanol (CH3OH) can be represented by the following structural formulas. Such structural representations are called complete structural formulas.

image1

These structural formulas can be further abbreviated by omitting some or all of the dashes representing covalent bonds and by indicating the number of identical groups attached to an atom by a subscript. The resulting expression of the compound is called a condensed structural formula. Thus, ethane, ethene, ethyne and methanol can be written as:

CH3CH3 H2C=CH2 HCCH CH3OH

Ethane Ethene Ethyne Methanol

 Similarly, CH3CH2CH2CH2CH2CH2CH2CH3 can be further condensed to CH3(CH2)6CH3. For further simplification, organic chemists use another way of representing the structures, in which only lines are used. In this bond-line structural representation of organic compounds, carbon and hydrogen atoms are not shown and the lines representing carbon-carbon bonds are drawn in a zig-zag fashion. The only atoms specifically written are oxygen, chlorine, nitrogen etc. The terminals denote methyl (–CH3) groups (unless indicated otherwise by a functional group), while the line junctions denote carbon atoms bonded to appropriate number of hydrogens required to satisfy the valency of the carbon atoms. Some of the examples are represented as follows:

(i) 3-Methyloctane can be represented in various forms as:

(a) CH3CH2CH|CH3CH2CH2CH2CH2CH3

(b)

(c)

 

 (ii) Various ways of representing 2-bromo butane are:

(a) CH3CHBrCH2CH

(b) 


(c) 

In cyclic compounds, the bond-line formulas may be given as follows:

Cyclopropane

Cyclopentane

chlorocyclohexane

Problem 12.4

Expand each of the following condensed formulas into their complete structural formulas.

(a) CH3CH2COCH2CH3

(b) CH3CH=CH(CH2)3CH3

Solution

(a)  


 

(b)


 

Problem 12.5

For each of the following compounds, write a condensed formula and also their bond-line formula.

(a) HOCH2CH2CH2CH(CH3)CH(CH3)CH3

(b)

Solution

Condensed formula:

(a) HO(CH2)3CH(CH3)CH(CH3)2

(b) HOCH(CN)2

Bond-line formula:

(a)


(b)

 

Problem 12.6

Expand each of the following bond-line formulas to show all the atoms including carbon and hydrogen

(a)

(b)
(c)
(d)
 
Solution
 

 

 

12.3.2 Three-Dimensional Representation of Organic Molecules

 The three-dimensional (3-D) structure of organic molecules can be represented on paper by using certain conventions. For example, by using solid () and dashed () wedge formula, the 3-D image of a molecule from a two-dimensional picture can be perceived. In these formulas the solid-wedge is used to indicate a bond projecting out of the plane of paper, towards the observer. The dashed-wedge is used to depict the bond projecting out of the plane of the paper and away from the observer. Wedges are shown in such a way that the broad end of the wedge is towards the observer. The bonds lying in plane of the paper are depicted by using a normal line (—). 3-D representation of methane molecule on paper has been shown in Fig. 12.1.

Fig. 12.1 Wedge-and-dash representation of CH4

 Molecular Models

Molecular models are physical devices that are used for a better visualisation and perception of three-dimensional shapes of organic molecules. These are made of wood, plastic or metal and are commercially available. Commonly three types of molecular models are used: (1) Framework model, (2) Ball-and-stick model, and (3) Space filling model. In the framework model only the bonds connecting the atoms of a molecule and not the atoms themselves are shown. This model emphasizes the pattern of bonds of a molecule while ignoring the size of atoms. In the ball-and-stick model, both the atoms and the bonds are shown. Balls represent atoms and the stick denotes a bond. Compounds containing C=C (e.g., ethene) can best be represented by using springs in place of sticks. These models are referred to as ball-and-spring model. The space-filling model emphasises the relative size of each atom based on its van der Waals radius. Bonds are not shown in this model. It conveys the volume occupied by each atom in the molecule. In addition to these models, computer graphics can also be used for molecular modelling.

 

Framework model
Ball and stick model

Space filling model

Fig. 12.2

Ethyne Methanol

Ethane Ethene



12.4 Classification of Organic Compounds

 
 The existing large number of organic compounds and their ever-increasing numbers has made it necessary to classify them on the basis of their structures. Organic compounds are broadly classified as follows:
 

 

I. Acyclic or open chain compounds

These compounds are also called as aliphatic compounds and consist of straight or branched chain compounds, for example:

CH3CH3

Ethane

 

 

 

Isobutane

 

Acetaldehyde

 

Acetic acid

 

II Cyclic or closed chain or ring compounds

 (a) Alicyclic compounds

Alicyclic (aliphatic cyclic) compounds contain carbon atoms joined in the form of a ring (homocyclic).

Cyclopropane Cyclohexane Cyclohexene

Sometimes atoms other than carbon are also present in the ring (heterocylic). Tetrahydrofuran given below is an example of this type of compound:

Tetrahydrofuran

 

These exhibit some of the properties similar to those of aliphatic compounds.

(b) Aromatic compounds

Aromatic compounds are special types of compounds. You will learn about these compounds in detail in Unit 13. These include benzene and other related ring compounds (benzenoid). Like alicyclic compounds, aromatic comounds may also have hetero atom in the ring. Such compounds are called hetrocyclic aromatic compounds. Some of the examples of various types of aromatic compounds are:

Benzenoid aromatic compounds

Benzene Aniline Naphthalene

 

Non-benzenoid compound

Tropone

Heterocyclic aromatic compounds

Furan Thiophene Pyridine

Organic compounds can also be classified on the basis of functional groups, into families or homologous series.

 

12.4.1 Functional Group

 The functional group is an atom or a group of atoms joined to the carbon chain which is responsible for the characteristic chemical properties of the organic compounds. The examples are hydroxyl group (–OH), aldehyde group (–CHO) and carboxylic acid group (–COOH) etc.

 

12.4.2 Homologous Series

 A group or a series of organic compounds each containing a characteristic functional group forms a homologous series and the members of the series are called homologues. The members of a homologous series can be represented by general molecular formula and the successive members differ from each other in molecular formula by a –Ch2 unit. There are a number of homologous series of organic compounds. Some of these are alkanes, alkenes, alkynes, haloalkanes, alkanols, alkanals, alkanones, alkanoic acids, amines etc.

It is also possible that a compound contains two or more identical or different functional groups. This gives rise to polyfunctional compounds.



12.5 NOMENCLATURE OF ORGANIC COMPOUNDS

 Organic chemistry deals with millions of compounds. In order to clearly identify them, a systematic method of naming has been developed and is known as the IUPAC (International Union of Pure and Applied Chemistry) system of nomenclature. In this systematic nomenclature, the names are correlated with the structure such that the reader or listener can deduce the structure from the name.

Before the IUPAC system of nomenclature, however, organic compounds were assigned names based on their origin or certain properties. For instance, citric acid is named so because it is found in citrus fruits and the acid found in red ant is named formic acid since the Latin word for ant is formica. These names are traditional and are considered as trivial or common names. Some common names are followed even today. For example, Buckminsterfullerene is a common name given to the newly discovered C60 cluster (a form of carbon) noting its structural similarity to the geodesic domes popularised by the famous architect R. Buckminster Fuller. Common names are useful and in many cases indispensable, particularly when the alternative systematic names are lengthy and complicated. Common names of some organic compounds are given in Table 12.1.

Table 12.1 Common or Trivial Names of Some Organic Compounds

 

12.5.1 The IUPAC System of Nomenclature

 A systematic name of an organic compound is generally derived by identifying the parent hydrocarbon and the functional group(s) attached to it. See the example given below.

By further using prefixes and suffixes, the parent name can be modified to obtain the actual name. Compounds containing carbon and hydrogen only are called hydrocarbons. A hydrocarbon is termed saturated if it contains only carbon-carbon single bonds. The IUPAC name for a homologous series of such compounds is alkane. Paraffin (Latin: little affinity) was the earlier name given to these compounds. Unsaturated hydrocarbons are those, which contain at least one carbon-carbon double or triple bond.

 

12.5.2 IUPAC Nomenclature of Alkanes

Straight chain hydrocarbons: The names of such compounds are based on their chain structure, and end with suffix ‘-ane’ and carry a prefix indicating the number of carbon atoms present in the chain (except from CH4 to C4H10, where the prefixes are derived from trivial names). The IUPAC names of some straight chain saturated hydrocarbons are given in Table 12.2. The alkanes in Table 12.2 differ from each other by merely the number of -CH2 groups in the chain. They are homologues of alkane series.

Table 12.2 IUPAC Names of Some Unbranched Saturated Hydrocarbons

 Branched chain hydrocarbons: In a branched chain compound small chains of carbon atoms are attached at one or more carbon atoms of the parent chain. The small carbon chains (branches) are called alkyl groups. For example:

image2

 

In order to name such compounds, the names of alkyl groups are prefixed to the name of parent alkane. An alkyl group is derived from a saturated hydrocarbon by removing a hydrogen atom from carbon. Thus, CH4 becomes -CH3 and is called methyl group. An alkyl group is named by substituting ‘yl’ for ‘ane’ in the corresponding alkane. Some alkyl groups are listed in Table 12.3.

Table 12.3 Some Alkyl Groups

Abbreviations are used for some alkyl groups. For example, methyl is abbreviated as Me, ethyl as Et, propyl as Pr and butyl as Bu. The alkyl groups can be branched also. Thus, propyl and butyl groups can have branched structures as shown below.
image4

Common branched groups have specific trivial names. For example, the propyl groups can either be n-propyl group or isopropyl group. The branched butyl groups are called sec-butyl, isobutyl and tert-butyl group. We also encounter the structural unit, –CH2C(CH3)3, which is called neopentyl group.

 Nomenclature of branched chain alkanes: We encounter a number of branched chain alkanes. The rules for naming them are given below.

1. First of all, the longest carbon chain in the molecule is identified. In the example (I) given below, the longest chain has nine carbons and it is considered as the parent or root chain. Selection of parent chain as shown in (II) is not correct because it has only eight carbons.

 

2. The carbon atoms of the parent chain are numbered to identify the parent alkane and to locate the positions of the carbon atoms at which branching takes place due to the substitution of alkyl group in place of hydrogen atoms. The numbering is done in such a way that the branched carbon atoms get the lowest possible numbers. Thus, the numbering in the above example should be from left to right (branching at carbon atoms 2 and 6) and not from right to left (giving numbers 4 and 8 to the carbon atoms at which branches are attached).

image56

3. The names of alkyl groups attached as a branch are then prefixed to the name of the parent alkane and position of the substituents is indicated by the appropriate numbers. If different alkyl groups are present, they are listed in alphabetical order. Thus, name for the compound shown above is: 6-ethyl-2-methylnonane. [Note: the numbers are separated from the groups by hyphens and there is no break between methyl and nonane.]

 4. If two or more identical substituent groups are present then the numbers are separated by commas. The names of identical substituents are not repeated, instead prefixes such as di (for 2), tri (for 3), tetra (for 4), penta (for 5), hexa (for 6) etc. are used. While writing the name of the substituents in alphabetical order, these prefixes, however, are not considered. Thus, the following compounds are named as:

image5

5. If the two substituents are found in equivalent positions, the lower number is given to the one coming first in the alphabetical listing. Thus, the following compound is 3-ethyl-6-methyloctane and not 6-ethyl-3-methyloctane.

image6

6. The branched alkyl groups can be named by following the above mentioned procedures. However, the carbon atom of the branch that attaches to the root alkane is numbered 1 as exemplified below.

image7

 The name of such branched chain alkyl group is placed in parenthesis while naming the compound. While writing the trivial names of substituents’ in alphabetical order, the prefixes iso- and neo- are considered to be the part of the fundamental name of alkyl group. The prefixes sec- and tert- are not considered to be the part of the fundamental name. The use of iso and related common prefixes for naming alkyl groups is also allowed by the IUPAC nomenclature as long as these are not further substituted. In multi-substituted compounds, the following rules may aso be remembered:

• If there happens to be two chains of equal size, then that chain is to be selected which contains more number of side chains.

• After selection of the chain, numbering is to be done from the end closer to the substituent.

 


5-(2-Ethylbutyl)-3,3-dimethyldecane

[and not 5-(2,2-Dimethylbutyl)-3-ethyldecane]

 

5-sec-Butyl-4-isopropyldecane

 


5-(2,2-Dimethylpropyl)nonane

 

 Cyclic Compounds: A saturated monocyclic compound is named by prefixing ‘cyclo’ to the corresponding straight chain alkane. If side chains are present, then the rules given above are applied. Names of some cyclic compounds are given below.

 

3-Ethyl-1,1-dimethylcyclohexane

(not 1-ethyl-3,3-dimethylcyclohexane)

 

Problem 12.7

Structures and IUPAC names of some hydrocarbons are given below. Explain why the names given in the parentheses are incorrect.

2,5,6- Trimethyloctane

[and not 3,4,7-Trimethyloctane]

 

3-Ethyl-5-methylheptane

[and not 5-Ethyl-3-methylheptane]

 

Solution

(a) Lowest locant number, 2,5,6 is lower than 3,5,7, (b) substituents are in equivalent position; lower number is given to the one that comes first in the name according to alphabetical order.

 

12.5.3 Nomenclature of Organic Compounds having Functional Group(s)

 A functional group, as defined earlier, is an atom or a group of atoms bonded together in a unique manner which is usually the site of chemical reactivity in an organic molecule. Compounds having the same functional group undergo similar reactions. For example, CH3OH, CH3CH2OH, and (CH3)2CHOH — all having -OH functional group liberate hydrogen on reaction with sodium metal. The presence of functional groups enables systematisation of organic compounds into different classes. Examples of some functional groups with their prefixes and suffixes along with some examples of organic compounds possessing these are given in Table 12.4.

First of all, the functional group present in the molecule is identified which determines the choice of appropriate suffix. The longest chain of carbon atoms containing the functional group is numbered in such a way that the functional group is attached at the carbon atom possessing lowest possible number in the chain. By using the suffix as given in Table 12.4, the name of the compound is arrived at.

In the case of polyfunctional compounds, one of the functional groups is chosen as the principal functional group and the compound is then named on that basis. The remaining functional groups, which are subordinate functional groups, are named as substituents using the appropriate prefixes. The choice of principal functional group is made on the basis of order of preference. The order of decreasing priority for some functional groups is:

-COOH, SO3H, -COOR (R=alkyl group), COCl,
-CONH
2, -CN,-HC=O, >C=O, -OH, -NH2, >C=C<, -CC- .

 The –R, C6H5-, halogens (F, Cl, Br, I), –NO2, alkoxy (–OR) etc. are always prefix substituents. Thus, a compound containing both an alcohol and a keto group is named as hydroxyalkanone since the keto group is preferred to the hydroxyl group.

For example, HOCH2(CH2)3CH2COCH3 will be named as 7-hydroxyheptan-2-one and not as 2-oxoheptan -7-ol. Similarly, BrCH2CH=CH2 is named as 3-bromoprop-1-ene and not 1-bromoprop-2-ene.

If more than one functional group of the same type are present, their number is indicated by adding di, tri, etc. before the class suffix. In such cases the full name of the parent alkane is written before the class suffix. For example CH2(OH)CH2(OH) is named as ethane–1,2–diol. However, the ending – ne of the parent alkane is dropped in the case of compounds having more than one double or triple bond; for example, CH2=CH-CH=CH2 is named as buta–1,3–diene.

 Table 12.4 Some Functional Groups and Classes of Organic Compounds

 

Problem 12.8

Write the IUPAC names of the compounds i-iv from their given structures.

 

Solution

The functional group present is an alcohol (OH). Hence the suffix is ‘-ol’.

The longest chain containing -OH has eight carbon atoms. Hence the corresponding saturated hydrocarbon is octane.

The -OH is on carbon atom 3. In addition, a methyl group is attached at 6th carbon.

Hence, the systematic name of this compound is 6-Methyloctan-3-ol.

Solution

The functional group present is ketone (>C=O), hence suffix ‘-one’. Presence of two keto groups is indicated by ‘di’, hence suffix becomes ‘dione’. The two keto groups are at carbons 2 and 4. The longest chain contains 6 carbon atoms, hence, parent hydrocarbon is hexane. Thus, the systematic name is Hexane-2,4-dione.

 

Solution

Here, two functional groups namely ketone and carboxylic acid are present. The principal functional group is the carboxylic acid group; hence the parent chain will be suffixed with ‘oic’ acid. Numbering of the chain starts from carbon of – COOH functional group. The keto group in the chain at carbon 5 is indicated by ‘oxo’. The longest chain including the principal functional
group has 6 carbon atoms; hence the parent hydrocarbon is hexane. The compound is, therefore, named as
5-Oxohexanoic acid.


Solution

The two C=C functional groups are present at carbon atoms 1 and 3, while the CC functional group is present at carbon 5. These groups are indicated by suffixes ‘diene’ and ‘yne’ respectively. The longest chain containing the functional groups has 6 carbon atoms; hence the parent hydrocarbon is hexane. The name of compound, therefore, is Hexa-1,3-dien-5-yne.

Problem 12.9

Derive the structure of (i) 2-Chlorohexane, (ii) Pent-4-en-2-ol, (iii) 3- Nitrocyclohexene, (iv) Cyclohex-2-en-1-ol, (v) 6-Hydroxy-heptanal. 

Solution

(i) ‘hexane’ indicates the presence of
6 carbon atoms in the chain. The functional group chloro is present at carbon 2. Hence, the structure of the compound is CH
3CH2CH2CH2CH(Cl)CH3.

(ii) ‘pent’ indicates that parent hydrocarbon contains 5 carbon atoms in the chain. ‘en’ and ‘ol’ correspond to the functional groups C=C and -OH at carbon atoms 4 and 2 respectively. Thus, the structure is

CH2=CHCH2CH (OH)CH3.

(iii) Six membered ring containing a carbon-carbon double bond is implied by cyclohexene, which is numbered as shown in (I). The prefix 3-nitro means that a nitro group is present on C-3. Thus, complete structural formula of the compound is (II). Double bond is suffixed functional group whereas NO2 is prefixed functional group therefore double bond gets preference over –NO2 group:

(iv) ‘1-ol’ means that a -OH group is present at C-1. OH is suffixed functional group and gets preference over C=C bond. Thus the structure is as shown
in (II):


(v) ‘heptanal’ indicates the compound to be an aldehyde containing 7 carbon atoms in the parent chain. The
‘6-hydroxy’ indicates that -OH group is present at carbon 6. Thus, the structural formula of the compound is: CH
3CH(OH)CH2CH2CH2CH2CHO. Carbon atom of –CHO group is included while numbering the carbon chain.

 

 

12.5.4 Nomenclature of Substituted Benzene Compounds

 For IUPAC nomenclature of substituted benzene compounds, the substituent is placed as prefix to the word benzene as shown in the following examples. However, common names (written in bracket below) of many substituted benzene compounds are also universally used.

 

Methylbenzene        Methoxybenzene       Aminobenzene

(Toluene) (Anisole)  (Aniline)

 

 

Nitrobenzene Bromobenzene

If benzene ring is disubstituted, the position of substituents is defined by numbering the carbon atoms of the ring such that the substituents are located at the lowest numbers possible.For example, the compound(b) is named as 1,3-dibromobenzene and not as 1,5-dibromobenzene.


(a) 1,2-Dibromo-benzene (b) 1,3-Dibromo-benzene (c) 1,4-Dibromo-benzene

 

In the trivial system of nomenclature the terms ortho (o), meta (m) and para (p) are used as prefixes to indicate the relative positions 1,2;1,3 and 1,4 respectively. Thus,1,3-dibromobenzene (b) is named as m-dibromobenzene (meta is abbreviated as m-) and the other isomers of dibromobenzene 1,2-(a) and 1,4-(c), are named as ortho (or just o-) and para (or just p-)-dibromobenzene, respectively.

 For tri - or higher substituted benzene derivatives, these prefixes cannot be used and the compounds are named by identifying substituent positions on the ring by following the lowest locant rule. In some cases, common name of benzene derivatives is taken as the base compound.

Substituent of the base compound is assigned number1 and then the direction of numbering is chosen such that the next substituent gets the lowest number. The substituents appear in the name in alphabetical order. Some examples are given below.


1-Chloro-2,4-dinitrobenzene

(not 4-chloro,1,3-dinitrobenzene)

 


2-Chloro-1-methyl-4-nitrobenzene

(not 4-methyl-5-chloro-nitrobenzene)

 

 

2-Chloro-4-methylanisole 4-Ethyl-2-methylaniline
 
3,4-Dimethylphenol

When a benzene ring is attached to an alkane with a functional group, it is considered as substituent, instead of a parent. The name for benzene as substituent is phenyl (C6H5-, also abbreviated as Ph).

Problem 12.10

Write the structural formula of:

(a) o-Ethylanisole, (b) p-Nitroaniline,

(c) 2,3 - Dibromo -1 - phenylpentane,

(d) 4-Ethyl-1-fluoro-2-nitrobenzene. 

Solution

(a)  (b)

 

 

 

(c)  (d)

 



12.6 ISOMERISM

 The phenomenon of existence of two or more compounds possessing the same molecular formula but different properties is known as isomerism. Such compounds are called as isomers. The following flow chart shows different types of isomerism.

 

12.6.1 Structural Isomerism

Compounds having the same molecular formula but different structures (manners in which atoms are linked) are classified as structural isomers. Some typical examples of different types of structural isomerism are given below:

(i) Chain isomerism: When two or more compounds have similar molecular formula but different carbon skeletons, these are referred to as chain isomers and the phenomenon is termed as chain isomerism. For example, C5H12 represents three compounds:

image8

 (ii) Position isomerism: When two or more compounds differ in the position of substituent atom or functional group on the carbon skeleton, they are called position isomers and this phenomenon is termed as position isomerism. For example, the molecular formula C3H8O represents two alcohols:

image9

 

(iii) Functional group isomerism: Two or more compounds having the same molecular formula but different functional groups are called functional isomers and this phenomenon is termed as functional group isomerism. For example, the molecular formula C3H6O represents an aldehyde and a ketone:

image10

image11

(iv) Metamerism: It arises due to different alkyl chains on either side of the functional group in the molecule. For example, C4H10O represents methoxypropane (CH3OC3H7) and ethoxyethane (C2H5OC2H5).

 

12.6.2 Stereoisomerism

 The compounds that have the same constitution and sequence of covalent bonds but differ in relative positions of their atoms or groups in space are called stereoisomers. This special type of isomerism is called as stereoisomerism and can be classified as geometrical and optical isomerism.



12.7 FUNDAMENTAL CONCEPTS IN ORGANIC REACTION MECHANISM

 In an organic reaction, the organic molecule (also referred as a substrate) reacts with an appropriate attacking reagent and leads to the formation of one or more intermediate(s) and finally product(s)

The general reaction is depicted as follows :

image12

Substrate is that reactant which supplies carbon to the new bond and the other reactant is called reagent. If both the reactants supply carbon to the new bond then choice is arbitrary and in that case the molecule on which attention is focused is called substrate.

In such a reaction a covalent bond between two carbon atoms or a carbon and some other atom is broken and a new bond is formed. A sequential account of each step, describing details of electron movement, energetics during bond cleavage and bond formation, and the rates of transformation of reactants into products (kinetics) is referred to as reaction mechanism. The knowledge of reaction mechanism helps in understanding the reactivity of organic compounds and in planning strategy for their synthesis.

In the following sections, we shall learn some of the principles that explain how these reactions take place.

 

12.7.1 Fission of a Covalent Bond

 A covalent bond can get cleaved either by : (i) heterolytic cleavage, or by (ii) homolytic cleavage.

In heterolytic cleavage, the bond breaks in such a fashion that the shared pair of electrons remains with one of the fragments.

After heterolysis, one atom has a sextet electronic structure and a positive charge and the other, a valence octet with at least one lone pair and a negative charge. Thus, heterolytic cleavage of bromomethane will give and Br as shown below.

A species having a carbon atom possessing sextext of electrons and a positive charge is called a carbocation (earlier called carbonium ion). The H3 ion is known as a methyl cation or methyl carbonium ion. Carbocations are classified as primary, secondary or tertiary depending on whether one, two or three carbons are directly attached to the positively charged carbon. Some other examples of carbocations are: CH3C+H2 (ethyl cation, a primary carbocation), (CH3)2C+H (isopropyl cation, a secondary carbocation), and (CH3)3C+ (tert-butyl cation, a tertiary carbocation). Carbocations are highly unstable and reactive species. Alkyl groups directly attached to the positively charged carbon stabilise the carbocations due to inductive and hyperconjugation effects, which you will be studying in the sections 12.7.5 and 12.7.9. The observed order of carbocation stability is: C+H3 < CH3C+H2 < (CH3)2C+H < (CH3)3C+. These carbocations have trigonal planar shape with positively charged carbon being sp2 hybridised. Thus, the shape of C+H3 may be considered as being derived from the overlap of three equivalent C(sp2) hybridised orbitals with 1s orbital of each of the three hydrogen atoms. Each bond may be represented as C(sp2)–H(1s) sigma bond. The remaining carbon orbital is perpendicular to the molecular plane and contains no electrons. [Fig. 12.3(a)].

Fig. 12.3 (a) Shape of methyl carbocation

 The heterolytic cleavage can also give a species in which carbon gets the shared pair of electrons. For example, when group Z attached to the carbon leaves without

electron pair, the methyl anion is

formed. Such a carbon species carrying a negative charge on carbon atom is called carbanion. Carbon in carbanion is generally sp3 hybridised and its structure is distorted tetrahedron as shown in Fig. 12.3(b).

Fig. 12.3 (b) Shape of methyl carbocation

Carbanions are also unstable and reactive species. The organic reactions which proceed through heterolytic bond cleavage are called ionic or heteropolar or just polar reactions.

In homolytic cleavage, one of the electrons of the shared pair in a covalent bond goes with each of the bonded atoms. Thus, in homolytic cleavage, the movement of a single electron takes place instead of an electron pair. The single electron movement is shown by ‘half-headed’ (fish hook:) curved arrow. Such cleavage results in the formation of neutral species (atom or group) which contains an unpaired electron. These species are called free radicals. Like carbocations and carbanions, free radicals are also very reactive. A homolytic cleavage can be shown as:

Alkyl

free radical

Alkyl radicals are classified as primary, secondary, or tertiary. Alkyl radical stability increases as we proceed from primary to tertiary:

image13

Organic reactions, which proceed by homolytic fission are called free radical or homopolar or nonpolar reactions.

 

12.7.2 Substrate and Reagent

Ions are generally not formed in the reactions of organic compounds. Molecules as such participate in the reaction. It is convenient to name one reagent as substrate and other as reagent. In general, a molecule whose carbon is involved in new bond formation is called substrate and the other one is called reagent. When carbon-carbon bond is formed, the choice of naming the reactants as substrate and reagent is arbitrary and depends on molecule under observation. Example:

(i) 

CH2 = CH2 + Br2 CH2 Br – CH2Br

Substrate Reagent Product

 

(ii)

 

Nucleophiles and Electrophiles

 Reagents attack the reactive site of the substrate. The reactive site may be electron deficient portion of the molecule (a positive reactive site) e.g., an atom with incomplete electron shell or the positive end of the dipole in the molecule. If the attacking species is electron rich, it attacks these sites. If attacking species is electron deficient, the reactive site for it is that part of the substrate molecule which can supply electrons, e.g., electrons in a double bond.

A reagent that brings an electron pair to the reactive site is called a nucleophile (Nu:) i.e., nucleus seeking and the reaction is then called nucleophilic. A reagent that takes away an electron pair from reactive site is called electrophile (E+) i.e., electron seeking and the reaction is called electrophilic.

During a polar organic reaction, a nucleophile attacks an electrophilic centre of the substrate which is that specific atom or part of the substrate which is electron deficient. Similarly, the electrophiles attack at nucleophilic centre, which is the electron
rich centre of the substrate. Thus, the electrophiles receive electron pair from the substrate when the two undergo bonding interaction. A curved-arrow notation is used to show the movement of an electron pair from the nucleophile to the electrophile. Some examples of nucleophiles are the negatively charged ions with lone pair of electrons such as hydroxide (HO
), cyanide (NC) ions and carbanions (R3C:). Neutral molecules such
as etc., can also act as nucleophiles due to the presence of lone pair of electrons. Examples of electrophiles include carbocations () and neutral molecules having functional groups like carbonyl group (>C=O) or alkyl halides (R
3C-X, where X is a halogen atom). The carbon atom in carbocations has sextet configuration; hence, it is electron deficient and can receive a pair of electrons from the nucleophiles. In neutral molecules such as alkyl halides, due to the polarity of the C-X bond a partial positive charge is generated on the carbon atom and hence the carbon atom becomes an electrophilic centre at which a nucleophile can attack.

 

Problem 12.11

Using curved-arrow notation, show the formation of reactive intermediates when the following covalent bonds undergo heterolytic cleavage.

(a) CH3–SCH3, (b) CH3–CN, (c) CH3–Cu

Solution

 

Problem 12.12

Giving justification, categorise the following molecules/ions as nucleophile or electrophile:

Solution

Nucleophiles: These species have unshared pair of electrons, which can be donated and shared with an electrophile.

Electrophiles:. Reactive sites have only six valence electrons; can accept electron pair from a nucleophile.

Problem 12.13

Identify electrophilic centre in the following: CH3CH=O, CH3CN, CH3I.

Solution

Among CH3HC*=O, H3CC*N, and
H
3C*–I, the starred carbon atoms are electrophilic centers as they will have partial positive charge due to polarity of the bond.

 

12.7.3 Electron Movement in Organic Reactions

 The movement of electrons in organic reactions can be shown by curved-arrow notation. It shows how changes in bonding occur due to electronic redistribution during the reaction. To show the change in position of a pair of electrons, curved arrow starts from the point from where an electron pair is shifted and it ends at a location to which the pair of electron may move.

Presentation of shifting of electron pair is given below :

(i) from π bond to adjacent bond position

(ii) from π bond to adjacent atom

(iii) from atom to adjacent bond position

Movement of single electron is indicated by a single barbed ‘fish hooks’ (i.e. half headed curved arrow). For example, in transfer of hydroxide ion giving ethanol and in the dissociation of chloromethane, the movement of electron using curved arrows can be depicted as follows:

 

12.7.4 Electron Displacement Effects in Covalent Bonds

 The electron displacement in an organic molecule may take place either in the ground state under the influence of an atom or a substituent group or in the presence of an appropriate attacking reagent. The electron displacements due to the influence of an atom or a substituent group present in the molecule cause permanent polarlisation of the bond. Inductive effect and resonance effects are examples of this type of electron displacements. Temporary electron displacement effects are seen in a molecule when a reagent approaches to attack it. This type of electron displacement is called electromeric effect or polarisability effect. In the following sections we will learn about these types of electronic displacements.

 

12.7.5 Inductive Effect

 When a covalent bond is formed between atoms of different electronegativity, the electron density is more towards the more electronegative atom of the bond. Such a shift of electron density results in a polar covalent bond. Bond polarity leads to various electronic effects in organic compounds.

Let us consider cholorethane (CH3CH2Cl) in which the C–Cl bond is a polar covalent bond. It is polarised in such a way that the carbon-1 gains some positive charge (δ+) and the chlorine some negative charge (δ). The fractional electronic charges on the two atoms in a polar covalent bond are denoted by symbol δ (delta) and the shift of electron density is shown by an arrow that points from δ+ to δend of the polar bond.

image14

In turn carbon-1, which has developed partial positive charge (δ+) draws some electron density towards it from the adjacent C-C bond. Consequently, some positive charge (δδ+) develops on carbon-2 also, where δδ+ symbolises relatively smaller positive charge as compared to that on carbon – 1. In other words, the polar C – Cl bond induces polarity in the adjacent bonds. Such polarisation of σ-bond caused by the polarisation of adjacent σ-bond is referred to as the inductive effect. This effect is passed on to the subsequent bonds also but the effect decreases rapidly as the number of intervening bonds increases and becomes vanishingly small after three bonds. The inductive effect is related to the ability of substituent(s) to either withdraw or donate electron density to the attached carbon atom. Based on this ability, the substitutents can be classified as electron-withdrawing or electron donating groups relative to hydrogen. Halogens and many other groups such as nitro (- NO2), cyano (- CN), carboxy (- COOH), ester (COOR), aryloxy (-OAr, e.g. – OC6H5), etc. are electron-withdrawing groups. On the other hand, the alkyl groups like methyl (–CH3) and ethyl
(–CH
2–CH3) are usually considered as electron donating groups.

­

Problem 12.14

Which bond is more polar in the following pairs of molecules: 

(a) H3C-H, H3C-Br

(b) H3C-NH2, H3C-OH (c) H3C-OH, H3C-SH

Solution

(a) C–Br, since Br is more electronegative than H, (b) C–O, (c) C–O

Problem 12.15

In which C–C bond of CH3CH2CH2Br, the inductive effect is expected to be the least?

Solution

Magnitude of inductive effect diminishes as the number of intervening bonds increases. Hence, the effect is least in the bond between carbon-3 and hydrogen.

 

12.7.6 Resonance Structure

 There are many organic molecules whose behaviour cannot be explained by a single Lewis structure. An example is that of 

 

Benzene

benzene. Its cyclic structure containing alternating C–C single and C=C double bonds shown is inadequate for explaining its characteristic properties.

As per the above representation, benzene should exhibit two different bond lengths, due to C–C single and C=C double bonds. However, as determined experimentally benzene has a uniform C–C bond distances of 139 pm, a value intermediate between the C–C single(154 pm) and C=C double (134 pm) bonds. Thus, the structure of benzene cannot be represented adequately by the above structure. Further, benzene can be represented equally well by the energetically identical structures I and II.

Therefore, according to the resonance theory (Unit 4) the actual structure of benzene cannot be adequately represented by any of these structures, rather it is a hybrid of the two structures (I and II) called resonance structures. The resonance structures (canonical structures or contributing structures) are hypothetical and individually do not represent any real molecule. They contribute to the actual structure in proportion to their stability.

 Another example of resonance is provided by nitromethane (CH3NO2) which can be represented by two Lewis structures, (I and II). There are two types of N-O bonds in these structures.

However, it is known that the two N–O bonds of nitromethane are of the same length (intermediate between a N–O single bond and a N=O double bond). The actual structure of nitromethane is therefore a resonance hybrid of the two canonical forms I and II.

The energy of actual structure of the molecule (the resonance hybrid) is lower than that of any of the canonical structures. The difference in energy between the actual structure and the lowest energy resonance structure is called the resonance stabilisation energy or simply the resonance energy. The more the number of important contributing structures, the more is the resonance energy. Resonance is particularly important when the contributing structures are equivalent in energy.

The following rules are applied while writing resonance structures:

The resonance structures have (i) the same positions of nuclei and (ii) the same number of unpaired electrons. Among the resonance structures, the one which has more number of covalent bonds, all the atoms with octet of electrons (except hydrogen which has a duplet), less separation of opposite charges, (a negative charge if any on more electronegative atom, a positive charge if any on more electropositive atom) and more dispersal of charge, is more stable than others.

 

Problem 12.16

Write resonance structures of CH3COO and show the movement of electrons by curved arrows. 

Solution

First, write the structure and put unshared pairs of valence electrons on appropriate atoms. Then draw the arrows one at a time moving the electrons to get the other structures.

Stability: I > II > III

Problem 12.17

Write resonance structures of CH2=CH–CHO. Indicate relative stability of the contributing structures.

Solution

[I: Most stable, more number of covalent bonds, each carbon and oxygen atom has an octet and no separation of opposite charge II: negative charge on more electronegative atom and positive charge on more electropositive atom; III: does not contribute as oxygen has positive charge and carbon has negative charge, hence least stable].

Problem 12.18

Explain why the following two structures, I and II cannot be the major contributors to the real structure of CH3COOCH3

Solution

The two structures are less important contributors as they involve charge separation. Additionally, structure I contains a carbon atom with an incomplete octet.

 

12.7.7 Resonance Effect

 The resonance effect is defined as ‘the polarity produced in the molecule by the interaction of two π-bonds or between a π-bond and lone pair of electrons present on an adjacent atom’. The effect is transmitted through the chain. There are two types of resonance or mesomeric effect designated as R or M effect.

(i) Positive Resonance Effect (+R effect)

In this effect, the transfer of electrons is away from an atom or substituent group attached to the conjugated system. This electron displacement makes certain positions in the molecule of high electron densities. This effect in aniline is shown as :

 

(ii) Negative Resonance Effect (- R effect)

This effect is observed when the transfer of electrons is towards the atom or substituent group attached to the conjugated system. For example in nitrobenzene this electron displacement can be depicted as :


The atoms or substituent groups, which represent +R or –R electron displacement effects are as follows :

+R effect: – halogen, –OH, –OR, –OCOR, –NH2, –NHR, –NR2, –NHCOR,

– R effect: – COOH, –CHO, >C=O, – CN, –NO2

The presence of alternate single and double bonds in an open chain or cyclic system is termed as a conjugated system. These systems often show abnormal behaviour. The examples are 1,3- butadiene, aniline and nitrobenzene etc. In such systems, the π-electrons are delocalised and the system develops polarity.

 

12.7.8 Electromeric Effect (E effect)

 It is a temporary effect. The organic compounds having a multiple bond (a double or triple bond) show this effect in the presence of an attacking reagent only. It is defined as the complete transfer of a shared pair of
π
-electrons to one of the atoms joined by a multiple bond on the demand of an attacking reagent. The effect is annulled as soon as the attacking reagent is removed from the domain of the reaction. It is represented by E and the shifting of the electrons is shown by a curved arrow (). There are two distinct types of electromeric effect.

(i) Positive Eelctromeric Effect (+E effect) In this effect the π−electrons of the multiple bond are transferred to that atom to which the reagent gets attached. For example :


(ii) Negative Electromeric Effect (–E effect) In this effect the π - electrons of the multiple bond are transferred to that atom to which the attacking reagent does not get attached. For example:


When inductive and electromeric effects operate in opposite directions, the electomeric effect predominates.

 

12.7.9 Hyperconjugation

 Hyperconjugation is a general stabilising interaction. It involves delocalisation of σ electrons of C—H bond of an alkyl group directly attached to an atom of unsaturated system or to an atom with an unshared p orbital. The σ electrons of C—H bond of the alkyl group enter into partial conjugation with the attached unsaturated system or with the unshared p orbital. Hyperconjugation is a permanent effect.

To understand hyperconjugation effect, let us take an example of (ethyl cation) in which the positively charged carbon atom has an empty p orbital. One of the C-H bonds of the methyl group can align in the plane of this empty p orbital and the electrons constituting the C-H bond in plane with this p orbital can then be delocalised into the empty p orbital as depicted in Fig. 12.4 (a).

Fig. 12.4(a) Orbital diagram showing hyperconjugation in ethyl cation

 

This type of overlap stabilises the carbocation because electron density from the adjacent σ bond helps in dispersing the positive charge.

 In general, greater the number of alkyl groups attached to a positively charged carbon atom, the greater is the hyperconjugation interaction and stabilisation of the cation. Thus, we have the following relative stability of carbocations :


 

Hyperconjugation is also possible in alkenes and alkylarenes.

Delocalisation of electrons by hyperconjugation in the case of alkene can be depicted as in Fig. 12.4(b).


Fig. 12.4(b) Orbital diagram showing hyperconjugation in propene

 

 

There are various ways of looking at the hyperconjugative effect. One of the way is to regard C—H bond as possessing partial ionic character due to resonance.

The hyperconjugation may also be regarded as no bond resonance.

 

Problem 12.19

Explain why (CH3)3C+ is more stable than CH3C+H2 and C+H3 is the least stable cation. 

Solution

Hyperconjugation interaction in (CH3)3C+ is greater than in  CH3C+H2as the (CH3)3C+ has nine C-H bonds. In C+H3, vacant p orbital is perpendicular to the plane
in which C-H bonds lie; hence cannot overlap with it. Thus, C+H3
 lacks hyperconjugative stability.

 

12.7.10 Types of Organic Reactions and Mechanisms

Organic reactions can be classified into the following categories:

(i) Substitution reactions

(ii) Addition reactions

(iii) Elimination reactions

(iv) Rearrangement reactions

You will be studying these reactions in Unit 13 and later in class XII.



12.8 Methods of Purification of Organic Compounds

 Once an organic compound is extracted from a natural source or synthesised in the laboratory, it is essential to purify it. Various methods used for the purification of organic compounds are based on the nature of the compound and the impurity present in it.

The common techniques used for purification are as follows :

(i) Sublimation

(ii) Crystallisation

(iii) Distillation

(iv) Differential extraction and

(v) Chromatography

Finally, the purity of a compound is ascertained by determining its melting or boiling point. Most of the pure compounds have sharp melting points and boiling points. New methods of checking the purity of an organic compound are based on different types of chromatographic and spectroscopic techniques.

12.8.1 Sublimation

 You have learnt earlier that on heating, some solid substances change from solid to vapour state without passing through liquid state. The purification technique based on the above principle is known as sublimation and is used to separate sublimable compounds from non-sublimable impurities.

 

12.8.2 Crystallisation

 This is one of the most commonly used techniques for the purification of solid organic compounds. It is based on the difference in the solubilities of the compound and the impurities in a suitable solvent. The impure compound is dissolved in a solvent in which it is sparingly soluble at room temperature but appreciably soluble at higher temperature. The solution is concentrated to get a nearly saturated solution. On cooling the solution, pure compound crystallises out and is removed by filtration. The filtrate (mother liquor) contains impurities and small quantity of the compound. If the compound is highly soluble in one solvent and very little soluble in another solvent, crystallisation can be satisfactorily carried out in a mixture of these solvents. Impurities, which impart colour to the solution are removed by adsorbing over activated charcoal. Repeated crystallisation becomes necessary for the purification of compounds containing impurities of comparable solubilities.

 

12.8.3 Distillation

 This important method is used to separate (i) volatile liquids from nonvolatile impurities and (ii) the liquids having sufficient difference in their boiling points. Liquids having different boiling points vaporise at different temperatures. The vapours are cooled and the liquids so formed are collected separately. Chloroform (b.p 334 K) and aniline (b.p. 457 K) are easily separated by the technique of distillation (Fig 12.5). The liquid mixture is taken in a round bottom flask and heated carefully. On boiling, the vapours of lower boiling component are formed first. The vapours are condensed by using a condenser and the liquid is collected in a receiver. The vapours of higher boiling component form later and the liquid can be collected separately.

Fig.12.5 Simple distillation. The vapours of a substance formed are condensed and the liquid is collected in conical flask.

 Fractional Distillation: If the difference in boiling points of two liquids is not much, simple distillation cannot be used to separate them. The vapours of such liquids are formed within the same temperature range and are condensed simultaneously. The technique of fractional distillation is used in such cases. In this technique, vapours of a liquid mixture are passed through a fractionating column before condensation. The fractionating column is fitted over the mouth of the round bottom flask (Fig.12.6, page 358).

Fig.12.6 Fractional distillation. The vapours of lower boiling fraction reach the top of the column first followed by vapours of higher boiling fractions.

Vapours of the liquid with higher boiling point condense before the vapours of the liquid with lower boiling point. The vapours rising up in the fractionating column become richer in more volatile component. By the time the vapours reach to the top of the fractionating column, these are rich in the more volatile component. Fractionating columns are available in various sizes and designs as shown in Fig.12.7. A fractionating column provides many surfaces for heat exchange between the ascending vapours and the descending condensed liquid. Some of the condensing liquid in the fractionating column obtains heat from the ascending vapours and revaporises. The vapours thus become richer in low boiling component. The vapours of low boiling component ascend to the top of the column. On reaching the top, the vapours become pure in low boiling component and pass through the condenser and the pure liquid is collected in a receiver. After a series of successive distillations, the remaining liquid in the distillation flask gets enriched in high boiling component. Each successive condensation and vaporisation unit in the fractionating column is called a theoretical plate. Commercially, columns with hundreds of plates are available.

One of the technological applications of fractional distillation is to separate different fractions of crude oil in petroleum industry.

 Distillation under reduced pressure: This method is used to purify liquids having very high boiling points and those, which decompose at or below their boiling points. Such liquids are made to boil at a temperature lower than their normal boiling points by reducing the pressure on their surface. A liquid boils at a temperature at which its vapour pressure is equal to the external pressure. The pressure is reduced with the help of a water pump or vacuum pump (Fig.12.8). Glycerol can be separated from spent-lye in soap industry by using this technique.


Fig.12.7 Different types of fractionating columns.

Fig.12.8 Distillation under reduced pressure. A liquid boils at a temperature below its vapour pressure by reducing the pressure.

 Steam Distillation: This technique is applied to separate substances which are steam volatile and are immiscible with water. In steam distillation, steam from a steam generator is passed through a heated flask containing the liquid to be distilled. The mixture of steam and the volatile organic compound is condensed and collected. The compound is later separated from water using a separating funnel. In steam distillation, the liquid boils when the sum of vapour pressures due to the organic liquid (p1) and that due to water (p2) becomes equal to the atmospheric pressure (p), i.e. p =p1+ p2. Since p1 is lower than p, the organic liquid vaporises at lower temperature than its boiling point.

Thus, if one of the substances in the mixture is water and the other, a water insoluble substance, then the mixture will boil close to but below, 373K. A mixture of water and the substance is obtained which can be separated by using a separating funnel. Aniline is separated by this technique from aniline – water mixture (Fig.12.9, Page 360).

 

12.8.4 Differential Extraction

 When an organic compound is present in an aqueous medium, it is separated by shaking it with an organic solvent in which it is more soluble than in water. The organic solvent and the aqueous solution should be immiscible with each other so that they form two distinct layers which can be separated by separatory funnel. The organic solvent is later removed by distillation or by evaporation to get back the compound. Differential extraction is carried out in a separatory funnel as shown in Fig. 12.10 (Page 360). If the organic compound is less soluble in the organic solvent, a very large quantity of solvent would be required to extract even a very small quantity of the compound. The technique of continuous extraction is employed in such cases. In this technique same solvent is repeatedly used for extraction of the compound.


Fig.12.9 Steam distillation. Steam volatile component volatilizes, the vapours condense in the condenser and the liquid collects in conical flask.

12.8.5 Chromatography

 Chromatography is an important technique extensively used to separate mixtures into their components, purify compounds and also to test the purity of compounds. The name chromatography is based on the Greek word chroma, for colour since the method was first used for the separation of coloured substances found in plants. In this technique, the mixture of substances is applied onto a stationary phase, which may be a solid or a liquid. A pure solvent, a mixture of solvents, or a gas is allowed to move slowly over the stationary phase. The components of the mixture get gradually separated from one another. The moving phase is called the mobile phase.

Based on the principle involved, chromatography is classified into different categories. Two of these are:


Fig.12.10 Differential extraction. Extraction of compound takes place based on difference in solubility

(a) Adsorption chromatography, and

(b) Partition chromatography.

 a) Adsorption Chromatography: Adsor-ption chromatography is based on the fact that different compounds are adsorbed on an adsorbent to different degrees. Commonly used adsorbents are silica gel and alumina. When a mobile phase is allowed to move over a stationary phase (adsorbent), the components of the mixture move by varying distances over the stationary phase. Following are two main types of chromatographic techniques based on the principle of differential adsorption.

(a) Column chromatography, and

(b) Thin layer chromatography.

Column Chromatography: Column chromatography involves separation of a mixture over a column of adsorbent (stationary phase) packed in a glass tube. The column is fitted with a stopcock at its lower end (Fig. 12.11). The mixture adsorbed on adsorbent is placed on the top of the adsorbent column packed in a glass tube. An appropriate eluant which is a liquid or a mixture of liquids is allowed to flow down the column slowly. Depending upon the degree to which the compounds are adsorbed, complete separation takes place. The most readily adsorbed substances are retained near the top and others come down to various distances in the column (Fig.12.11).


Fig.12.11 Column chromatography. Different stages of separation of components of a mixture.

 Thin Layer Chromatography: Thin layer chromatography (TLC) is another type of adsorption chromatography, which involves separation of substances of a mixture over a thin layer of an adsorbent coated on glass plate. A thin layer (about 0.2mm thick) of an adsorbent (silica gel or alumina) is spread over a glass plate of suitable size. The plate is known as thin layer chromatography plate or chromaplate. The solution of the mixture to be separated is applied as a small spot about 2 cm above one end of the TLC plate. The glass plate is then placed in a closed jar containing the eluant (Fig. 12.12a). As the eluant rises up the plate, the components of the mixture move up along with the eluant to different distances depending on their degree of adsorption and separation takes place. The relative adsorption of each component of the mixture is expressed in terms of its retardation factor i.e. Rf value (Fig.12.12 b).

image15


 

Fig.12.12 (a) Thin layer chromatography. Chromatogram being developed.


Fig.12.12 (b) Developed chromatogram.

The spots of coloured compounds are visible on TLC plate due to their original colour. The spots of colourless compounds, which are invisible to the eye but fluoresce in ultraviolet light, can be detected by putting the plate under ultraviolet light. Another detection technique is to place the plate in a covered jar containing a few crystals of iodine. Spots of compounds, which adsorb iodine, will show up as brown spots. Sometimes an appropriate reagent may also be sprayed on the plate. For example, amino acids may be detected by spraying the plate with ninhydrin solution (Fig.12.12b).

 Partition Chromatography: Partition chromatography is based on continuous differential partitioning of components of a mixture between stationary and mobile phases. Paper chromatography is a type
of partition chromatography.
In paper chromatography, a special quality paper known as chromatography paper is used. Chromatography paper contains water trapped in it, which acts as the stationary phase.

 

Fig.12.13 Paper chromatography. Chromatography paper in two different shapes.

A strip of chromatography paper spotted at the base with the solution of the mixture is suspended in a suitable solvent or a mixture of solvents (Fig. 12.13). This solvent acts as the mobile phase. The solvent rises up the paper by capillary action and flows over the spot. The paper selectively retains different components according to their differing partition in the two phases. The paper strip so developed is known as a chromatogram. The spots of the separated coloured compounds are visible at different heights from the position of initial spot on the chromatogram. The spots of the separated colourless compounds may be observed either under ultraviolet light or by the use of an appropriate spray reagent as discussed under thin layer chromatography.


12.9 Qualitative Analysis of Organic Compounds

The elements present in organic compounds are carbon and hydrogen. In addition to these, they may also contain oxygen, nitrogen, sulphur, halogens and phosphorus.


12.9.1 Detection of Carbon and Hydrogen

 Carbon and hydrogen are detected by heating the compound with copper(II) oxide. Carbon present in the compound is oxidised to carbon dioxide (tested with lime-water, which develops turbidity) and hydrogen to water (tested with anhydrous copper sulphate, which turns blue).

C + 2CuO 2Cu + CO2

2H + CuO Cu + H2O

CO2 + Ca(OH)2 → CaCO3 + H2O

5H2O + CuSO4 → CuSO4.5H2O

White Blue

 

12.9.2 Detection of Other Elements

 Nitrogen, sulphur, halogens and phosphorus present in an organic compound are detected by “Lassaigne’s test”. The elements present in the compound are converted from covalent form into the ionic form by fusing the compound with sodium metal. Following reactions take place:

Na + C + N NaCN

2Na + S Na2S

Na + X Na X

(X = Cl, Br or I)

C, N, S and X come from organic compound.

Cyanide, sulphide and halide of sodium so formed on sodium fusion are extracted from the fused mass by boiling it with distilled water. This extract is known as sodium fusion extract.

 

(A) Test for Nitrogen

 The sodium fusion extract is boiled with iron(II) sulphate and then acidified with concentrated sulphuric acid. The formation of Prussian blue colour confirms the presence of nitrogen. Sodium cyanide first reacts with iron(II)sulphate and forms sodium hexacyanidoferrate(II). On heating with concentrated sulphuric acid some iron(II) ions are oxidised to iron(III) ions which react with sodium hexacyanidoferrate(II) to produce
iron(III) hexacyanidoferrate(II) (ferriferrocyanide) which is Prussian blue in colour.

6CN + Fe2+ [Fe(CN)6]4–

3[Fe(CN)6]4– + 4Fe3+ Fe4[Fe(CN)6]3.xH2O

Prussian blue

(B) Test for Sulphur

 (a) The sodium fusion extract is acidified with acetic acid and lead acetate is added to it. A black precipitate of lead sulphide indicates the presence of sulphur.

S2– + Pb2+ → PbS

Black

(b) On treating sodium fusion extract with sodium nitroprusside, appearance of a violet colour further indicates the presence of sulphur.

S2– + [Fe(CN)5NO]2– → [Fe(CN)5NOS]4–

Violet

In case, nitrogen and sulphur both are present in an organic compound, sodium thiocyanate is formed. It gives blood red colour and no Prussian blue since there are no free cyanide ions.

Na + C + N + S → NaSCN

Fe3+ +SCN → [Fe(SCN)]2+

Blood red

If sodium fusion is carried out with excess of sodium, the thiocyanate decomposes to yield cyanide and sulphide. These ions give their usual tests.

NaSCN + 2Na → NaCN+Na2S

 

(C) Test for Halogens

 The sodium fusion extract is acidified with nitric acid and then treated with silver nitrate. A white precipitate, soluble in ammonium hydroxide shows the presence of chlorine, a yellowish precipitate, sparingly soluble in ammonium hydroxide shows the presence of bromine and a yellow precipitate, insoluble in ammonium hydroxide shows the presence of iodine.

X + Ag+ → AgX

X represents a halogen – Cl, Br or I.

If nitrogen or sulphur is also present in the compound, the sodium fusion extract is first boiled with concentrated nitric acid to decompose cyanide or sulphide of sodium formed during Lassaigne’s test. These ions would otherwise interfere with silver nitrate test for halogens.

 

(D) Test for Phosphorus

 The compound is heated with an oxidising agent (sodium peroxide). The phosphorus present in the compound is oxidised to phosphate. The solution is boiled with nitric acid and then treated with ammonium molybdate. A yellow colouration or precipitate indicates the presence of phosphorus.

Na3PO4 + 3HNO3 → H3PO4+3NaNO3

H3PO4 + 12(NH4)2MoO4 + 21HNO3 →

Ammonium  molybdate

(NH4)3PO4.12MoO3 + 21NH4NO3 + 12H2O

Ammonium phosphomolybdate

 



12.10 Quantitative Analysis

 Quantitative analysis of compounds is very important in organic chemistry. It helps chemists in the determination of mass per cent of elements present in a compound. You have learnt in Unit-1 that mass per cent of elements is required for the determination of emperical and molecular formula.

The percentage composition of elements present in an organic compound is determined by the following methods:

 

12.10.1 Carbon and Hydrogen

Both carbon and hydrogen are estimated in one experiment. A known mass of an organic compound is burnt in the presence of excess of oxygen and copper(II) oxide. Carbon and hydrogen in the compound are oxidised to carbon dioxide and water respectively.

CxHy + (x + y/4) O2 → x CO2 + (y/2) H2O


 

Fig.12.14 Estimation of carbon and hydrogen. Water and carbon dioxide formed on oxidation of substance are absorbed in anhydrous calcium chloride and potassium hydroxide solutions respectively contained in U tubes.

 

The mass of water produced is determined by passing the mixture through a weighed
U-tube containing anhydrous calcium chloride. Carbon dioxide is absorbed in another U-tube containing concentrated solution of potassium hydroxide. These tubes are connected in series (Fig.12.14). The increase in masses of calcium chloride and potassium hydroxide gives the amounts of water and carbon dioxide from which the percentages of carbon and hydrogen are calculated.

Let the mass of organic compound be m g, mass of water and carbon dioxide produced be m1 and m2 g respectively;

Percentage of carbon= 12×m2×10044×m

Percentage of hydrogen = 2×m1×10018×m

 

Problem 12.20

On complete combustion, 0.246 g of an organic compound gave 0.198g of carbon dioxide and 0.1014g of water. Determine the percentage composition of carbon and hydrogen in the compound. 

Solution

Percentage of carbon=12×0.198×10044×0.246                                 =21.95 %

Percentage of hydrogen = 2×0.1014×10018×0.246

= 4.58%

 

12.10.2 Nitrogen

 There are two methods for estimation of nitrogen: (i) Dumas method and (ii) Kjeldahl’s method.

(i) Dumas method: The nitrogen containing organic compound, when heated with copper oxide in an atmosphere of carbon dioxide, yields free nitrogen in addition to carbon dioxide and water.

CxHyNz + (2x + y/2) CuO → x CO2 + y/2 H2O + z/2 N2 + (2x + y/2) Cu

Traces of nitrogen oxides formed, if any, are reduced to nitrogen by passing the gaseous mixture over a heated copper gauze. The mixture of gases so produced is collected over an aqueous solution of potassium hydroxide which absorbs carbon dioxide. Nitrogen is collected in the upper part of the graduated tube (Fig.12.15).

Let the mass of organic compound = m g

Volume of nitrogen collected = V1 mL

Room temperature = T1K

Fig.12.15 Dumas method. The organic compound yields nitrogen gas on heating it with copper(II) oxide in the presence of CO2 gas. The mixture of gases is collected over potassium hydroxide solution in which CO2 is absorbed and volume of nitrogen gas is determined.

Volume of nitrogen at STP=p1V1×273760×T1

(Let it be V mL)

Where p1 and V1 are the pressure and volume of nitrogen, p1 is different from the atmospheric pressure at which nitrogen gas is collected. The value of p1 is obtained by the relation;

p1= Atmospheric pressure – Aqueous tension

22400 mL N2 at STP weighs 28 g.

V mL N2 at STP weighs=28×V22400g

Percentage of nitrogen = 28×V×10022400×m

 

Problem 12.21

In Dumas’ method for estimation of nitrogen, 0.3g of an organic compound gave 50mL of nitrogen collected at 300K temperature and 715mm pressure. Calculate the percentage composition of nitrogen in the compound. (Aqueous tension at 300K=15 mm) 

Solution

Volume of nitrogen collected at 300K and 715mm pressure is 50 mL

Actual pressure = 715-15 =700 mm

Volume of nitrogen at STP=273×700×50300×760                                        =41.9 mL

22,400 mL of N2 at STP weighs = 28 g

41.9 mL of nitrogen weighs=28×41.922400gPercentage of nitrogen=28×41.9×10022400×0.3                                   =17.46 %

 

 (ii) Kjeldahl’s method: The compound containing nitrogen is heated with concentrated sulphuric acid. Nitrogen in the compound gets converted to ammonium sulphate (Fig. 12.16). The resulting acid mixture is then heated with excess of sodium hydroxide. The liberated ammonia gas is absorbed in an excess of standard solution of sulphuric acid. The amount of ammonia produced is determined by estimating the amount of sulphuric acid consumed in the reaction. It is done by estimating unreacted sulphuric acid left after the absorption of ammonia by titrating it with standard alkali solution. The difference between the initial amount of acid taken and that left after the reaction gives the amount of acid reacted with ammonia.


Fig.12.16 Kjeldahl method. Nitrogen-containing compound is treated with concentrated H2SO4 to get ammonium sulphate which liberates ammonia on treating with NaOH; ammonia is absorbed in known volume of standard acid.

 Organic compound + H2SO4 (NH4)2SO4

2NH3 + H2SO4 → (NH4)2SO4

Let the mass of organic compound taken = m g

Volume of H2SO4 of molarity, M,
taken =
V mL

Volume of NaOH of molarity, M, used for titration of excess of H2SO4 = V1 mL

V1mL of NaOH of molarity M

= V1 /2 mL of H2SO4 of molarity M

Volume of H2SO4 of molarity M unused
= (
V - V1/2) mL

(V- V1/2) mL of H2SO4 of molarity M

= 2(V-V1/2) mL of NH3 solution of molarity M.

1000 mL of 1 M NH3 solution contains
17g NH
3 or 14 g of N

2(V-V1/2) mL of NH3 solution of molarity M contains:

Kjeldahl method is not applicable to compounds containing nitrogen in nitro and azo groups and nitrogen present in the ring (e.g. pyridine) as nitrogen of these compounds does not change to ammonium sulphate under these conditions.

 

Problem 12.22

During estimation of nitrogen present in an organic compound by Kjeldahl’s method, the ammonia evolved from 0.5 g of the compound in Kjeldahl’s estimation of nitrogen, neutralized 10 mL of 1 M H2SO4. Find out the percentage of nitrogen in the compound. 

Solution

1 M of 10 mL H2SO4=1M of 20 mL NH3

1000 mL of 1M ammonia contains 14 g nitrogen

Fig. 12.17 Carius method. Halogen containing
organic compound is heated with fuming nitric acid in the presence of silver nitrate.

20 mL of 1M ammonia contains
g nitrogen

 

12.10.3 Halogens

 Carius method: A known mass of an organic compound is heated with fuming nitric acid in the presence of silver nitrate contained in a hard glass tube known as Carius tube, (Fig.12.17) 


Fig.12.17 Carius method. Halogen containing organic compound is heated with fuming nitric acid in the presence of silver nitrate.

in a furnace. Carbon and hydrogen present in the compound are oxidised to carbon dioxide and water. The halogen present forms the corresponding silver halide (AgX). It is filtered, washed, dried and weighed.

Let the mass of organic

compound taken = m g

Mass of AgX formed = m1 g

1 mol of AgX contains 1 mol of X

Mass of halogen in m1g of AgX

Percentage of halogen

 

Problem 12.23

In Carius method of estimation of halogen, 0.15 g of an organic compound gave 0.12 g of AgBr. Find out the percentage of bromine in the compound. 

Solution

Molar mass of AgBr = 108 + 80
= 188 g mol
-1

188 g AgBr contains 80 g bromine

0.12 g AgBr contains g bromine

 

12.10.4 Sulphur

 A known mass of an organic compound is heated in a Carius tube with sodium peroxide or fuming nitric acid. Sulphur present in the compound is oxidised to sulphuric acid. It is precipitated as barium sulphate by adding excess of barium chloride solution in water. The precipitate is filtered, washed, dried and weighed. The percentage of sulphur can be calculated from the mass of barium sulphate.

Let the mass of organic

compound taken = m g

and the mass of barium

sulphate formed = m1g

1 mol of BaSO4 = 233 g BaSO4 = 32 g sulphur

m1 g BaSO4 contains g sulphur

Problem 12.24

In sulphur estimation, 0.157 g of an organic compound gave 0.4813 g of barium sulphate. What is the percentage of sulphur in the compound? 

Solution

Molecular mass of BaSO4 = 137+32+64

= 233 g

233 g BaSO4 contains 32 g sulphur

0.4813 g BaSO4 contains g sulphur

 

 

12.10.5 Phosphorus

 A known mass of an organic compound is heated with fuming nitric acid whereupon phosphorus present in the compound is oxidised to phosphoric acid. It is precipitated as ammonium phosphomolybdate, (NH4)3 PO4.12MoO3, by adding ammonia and ammonium molybdate. Alternatively, phosphoric acid may be precipitated as MgNH4PO4 by adding magnesia mixture which on ignition yields Mg2P2O7.

Let the mass of organic compound taken
= m g and mass of ammonium phospho molydate = m
1g

Molar mass of (NH4)3PO4.12MoO3 = 1877g

Percentage of phosphorus =%

If phosphorus is estimated as Mg2P2O7,

Percentage of phosphorus =

where, 222 u is the molar mass of Mg2P2O7, m, the mass of organic compound taken, m1, the mass of Mg2P2O7 formed and 62, the mass of two phosphorus atoms present in the compound Mg2P2O7.

 

12.10.6 Oxygen

 The percentage of oxygen in an organic compound is usually found by difference between the total percentage composition (100) and the sum of the percentages of all other elements. However, oxygen can also be estimated directly as follows:

A definite mass of an organic compound is decomposed by heating in a stream of nitrogen gas. The mixture of gaseous products containing oxygen is passed over red-hot coke when all the oxygen is converted to carbon monoxide. This mixture is passed through warm iodine pentoxide (I2O5) when carbon monoxide is oxidised to carbon dioxide producing iodine.

Compound O2 + other gaseous products

2C + O2 2CO]× 5 (A)

I2O5 + 5CO → I2 + 5CO2]× 2 (B)

On making the amount of CO produced in equation (A) equal to the amount of CO used in equation (B) by multiplying the equations (A) and (B) by 5 and 2 respectively; we find that each mole of oxygen liberated from the compound will produce two moles of carbondioxide.

Thus 88 g carbon dioxide is obtained if 32 g oxygen is liberated.

Let the mass of organic compound taken be m g

Mass of carbon dioxide produced be m1 g

m1 g carbon dioxide is obtained from g O2

Percentage of oxygen = %

The percentage of oxygen can be derived from the amount of iodine produced also.

Presently, the estimation of elements in an organic compound is carried out by using microquantities of substances and automatic experimental techniques. The elements, carbon, hydrogen and nitrogen present in a compound are determined by an apparatus known as CHN elemental analyser. The analyser requires only a very small amount of the substance (1-3 mg) and displays the values on a screen within a short time. A detailed discussion of such methods is beyond the scope of this book.

 

Summary

In this unit, we have learnt some basic concepts in structure and reactivity of organic compounds, which are formed due to covalent bonding. The nature of the covalent bonding in organic compounds can be described in terms of orbitals hybridisation concept, according to which carbon can have sp3, sp2 and sp hybridised orbitals. The sp3, sp2 and sp hybridised carbons are found in compounds like methane, ethene and ethyne respectively. The tetrahedral shape of methane, planar shape of ethene and linear shape of ethyne can be understood on the basis of this concept. A sp3 hybrid orbital can overlap with 1s orbital of hydrogen to give a carbon - hydrogen (C–H) single bond (sigma, σ bond). Overlap of a sp2 orbital of one carbon with sp2 orbital of another results in the formation of a carbon–carbon σ bond. The unhybridised p orbitals on two adjacent carbons can undergo lateral (side-by-side) overlap to give a pi (π) bond. Organic compounds can be represented by various structural formulas. The three dimensional representation of organic compounds on paper can be drawn by wedge and dash formula.

Organic compounds can be classified on the basis of their structure or the functional groups they contain. A functional group is an atom or group of atoms bonded together in a unique fashion and which determines the physical and chemical properties of the compounds. The naming of the organic compounds is carried out by following a set of rules laid down by the International Union of Pure and Applied Chemistry (IUPAC). In IUPAC nomenclature, the names are correlated with the structure in such a way that the reader can deduce the structure from the name.

Organic reaction mechanism concepts are based on the structure of the substrate molecule, fission of a covalent bond, the attacking reagents, the electron displacement effects and the conditions of the reaction. These organic reactions involve breaking and making of covalent bonds. A covalent bond may be cleaved in heterolytic or homolytic fashion. A heterolytic cleavage yields carbocations or carbanions, while a homolytic cleavage gives free radicals as reactive intermediate. Reactions proceeding through heterolytic cleavage involve the complimentary pairs of reactive species. These are electron pair donor known as nucleophile and an electron pair acceptor known as electrophile. The inductive, resonance, electromeric and hyperconjugation effects may help in the polarisation of a bond making certain carbon atom or other atom positions as places of low or high electron densities.

Organic reactions can be broadly classified into following types; substitution, addition, elimination and rearrangement reactions.

Purification, qualitative and quantitative analysis of organic compounds are carried out for determining their structures. The methods of purification namely : sublimation, distillation and differential extraction are based on the difference in one or more physical properties. Chromatography is a useful technique of separation, identification and purification of compounds. It is classified into two categories : adsorption and partition chromatography. Adsorption chromatography is based on differential adsorption of various components of a mixture on an adsorbent. Partition chromatography involves continuous partitioning of the components of a mixture between stationary and mobile phases. After getting the compound in a pure form, its qualitative analysis is carried out for detection of elements present in it. Nitrogen, sulphur, halogens and phosphorus are detected by Lassaigne’s test. Carbon and hydrogen are estimated by determining the amounts of carbon dioxide and water produced. Nitrogen is estimated by Dumas or Kjeldahl’s method and halogens by Carius method. Sulphur and phosphorus are estimated by oxidising them to sulphuric and phosphoric acids respectively. The percentage of oxygen is usually determined by difference between the total percentage (100) and the sum of percentages of all other elements present.

Question 12.1:

What are hybridisation states of each carbon atom in the following compounds?

CH2=C=O,    CH3CH=CH2,   (CH3)2CO, CH2=CHCN,    C6H6

NEETprep Answer

Question 12.2:
Indicate the σ and π bonds in the following molecules:

C6H6, C6H12, CH2Cl2CH2=C=CH2=CH3NO2, HCONHCH3

NEETprep Answer

Question 12.3: 

Write bond life fourmulas for: Isopropyl alcohol, 2,3--Dimethyl butanal , Heptan-4-one.

NEETprep Answer

Question 12.4:
Give the IUPAC names of the following compounds:

 

(a) 

       

(b)  

(c) 

(d) 

(e) 

 

(f) Cl2CHCH2OH

NEETprep Answer

 

Question 12.5:
Which of the following represents the correct IUPAC name for the compounds concerned?

 

(a) 2,2-Dimethylpentane or 2-Dimethylpentane

(b) 2,4,7-Trimethyloctane or 2,5,7-Trimethyloctane
(c) 2-Chloro-4-methylpentane or 4-Chloro-2-methylpentane
(d) But-3-yn-1-ol or But-4-ol-1-yne

NEETprep Answer

Question 12.6:
Draw formulas for the first five members of each homologous series beginning with the

 

following compounds.


(a) H–COOH

 

(b) CH3COCH3
(c) H–CH=CH2

Answer 12.6:
NEETprep Answer

Question 12.7:

Give condensed and bond line structural formulas and identify the functional group(s)


present, if any, for:


(a)2,2,4-Trimethylpentane
(b)2-Hydroxy-1,2,3-propanetricarboxylic acid
(c) Hexanedial

NEETprep Answer

Question 12.8:
Identify the functional groups in the following compounds

 

(a) 

(b) 

 

(c) 

 

NEETprep Answer

Question 12.9:

Which of the two: O2NCH2CH2O-– or CH2CH2O- is expected to be more stable and why?

NEETprep Answer

Question 12.10:

Explain why alkyl groups act as electron donors when attached to a π system.

Question 12.11:
Draw the resonance structures for the following compounds. Show the electron shift using

curved-arrow notation.

(a) C6H5OH

(b) C6H5NO2

(c) CH3CH=CH-CHO

(d) C6H5CHO

(e) C6H5-C+H2

(f) CH3CH=CHCH2

Answer 12.11:

NEETprep Answer

Question 12:12:

What are electrophiles and nucleophiles? Explain with example. 

NEETprep Answer

Question 12.13:
Identify the reagents shown in bold in the following equations as nucleophiles or
electrophiles:

(a) CH3COOH+HO-CH3COO-+ H2O

(b) CH3COCH3+C-N(CH3)2C(CN)(OH)

(c) C6H5+CH3C+O C6H5COCH3

NEETprep Answer

Question 12.14:
Classify the following reactions in one of the reaction type studied in this unit.

(a) CH3CH2Br+HS-CH3CH2SH + Br-

(b) (CH3)2C=CH2 +HCl(CH3)2 ClC-CH3

(c) CH3CH2Br+ HO-CH2=CH2 +H2O + Br-

(d) (CH3)3C-CH2 OH + HBr (CH3)2 CBrCH2CH3+ H2O 

NEETprep Answer

Question 12.15:
What is the relationship between the members of following pairs of structures? Are they
structural or geometrical isomers or resonance contributors?

(a) 

(c) 

(d) 

NEETprep Answer

Question 12.16:
For the following bond cleavages, use curved-arrows to show the electron flow and classify

each as homolysis or heterolysis. Identify reactive intermediate produced as free radical,

carbocation and carbanion.

(a) 

(b) 

(c) 

(d) 

NEETprep Answer

Question 12.17:
Explain the terms Inductive and Electromeric effects. Which electron displacement effect

explains the following correct orders of acidity of the carboxylic acids?

(a)Cl3CCOOH > Cl2CHCOOH > ClCH2COOH

(b)CH3CH2COOH > (CH3)2CHCOOH > (CH3)3C.COOH

NEETprep Answer

Question 12.18:

Give a brief description of the principles of the following techniques taking an example in

each case.

(a) Crystallisation

(b) Distillation

(c) Chromatography

NEETprep Answer

 

                                                                                         Exercises

Question 12.19: Describe the method, which can be used to separate two compounds with different

solubilities in a solvent S.

NEETprep Answer

Question 12.20: What is the difference between distillation, distillation under reduced pressure and steam distillation ?

NEETprep Answer

 Question 12.21: Discuss the chemistry of Lassaigne’s test.

NEETprep Answer

 Question 12.22: Differentiate between the principle of estimation of nitrogen in an organic compound by

(i) Dumas method and (ii) Kjeldahl’s method.

NEETprep Answer

Question 12.23: Discuss the principle of estimation of halogens, sulphur and phosphorus present in an organic compound.

NEETprep Answer

 12.24: Explain the principle of paper chromatography.

NEETprep Answer

Question 12.25: Why is nitric acid added to sodium extract before adding silver nitrate for testing halogens?

 NEETprep Answer

 Question 12.26: Explain the reason for the fusion of an organic compound with metallic sodium for testing nitrogen, sulphur and halogens.

NEETprep Answer

12.27: Name a suitable technique of separation of the components from a mixture of calcium sulphate and camphor.

NEETprep Answer

Question 12.28:
Explain, why an organic liquid vaporises at a temperature below its boiling point in its
steam distillation?

NEETprep Answer


Question 12.29:
Will CCl4 give white precipitate of AgCl on heating it with silver nitrate? Give reason for
your answer.

NEETprep Answer

Question 12.30:
Why is a solution of potassium hydroxide used to absorb carbon dioxide evolved during
the estimation of carbon present in an organic compound? 

NEETprep Answer

Question 12.31:
Why is it necessary to use acetic acid and not sulphuric acid for acidification of sodium
extract for testing sulphur by lead acetate test?

NEETprep Answer

Question 12.32:
An organic compound contains 69% carbon and 4.8% hydrogen, the remainder being
oxygen. Calculate the masses of carbon dioxide and water produced when 0.20 g of this
substance is subjected to complete combustion.

NEETprep Answer

Question 12.33:
A sample of 0.50 g of an organic compound was treated according to Kjeldahl’s method.
The ammonia evolved was absorbed in 50 mL of 0.5 M H2SO4. The residual acid required
60 mL of 0.5 M solution of NaOH for neutralisation. Find the percentage composition of
nitrogen in the compound.

NEETprep Answer


Question 12.34:
0.3780 g of an organic chloro compound gave 0.5740 g of silver chloride in Carius
estimation. Calculate the percentage of chlorine present in the compound.

NEETprep Answer


Question 12.35
In the estimation of sulphur by Carius method, 0.468 g of an organic sulphur compound
afforded 0.668 g of barium sulphate. Find out the percentage of sulphur in the given
compound.

NEETprep Answer


Question 12.36:
In the organic compound CH2=CH–CH2–CH2–C≡CH, the pair of hydridised orbitals involved
in the formation of: C2 – C3 bond is:
(a) sp – sp2 (b) sp – sp3 (c) sp2 – sp3 (d) sp3– sp3

 

NEETprep Answer

Question 12.37:
In the Lassaigne’s test for nitrogen in an organic compound, the Prussian blue colour is
obtained due to the formation of:
(a) Na4[Fe(CN)6] (b) Fe4[Fe(CN)6]3 (c) Fe2[Fe(CN)6] (d) Fe3[Fe(CN)6]4

NEETprep Answer

Question 12.38:
Which of the following carbocation is most stable?
(a)  CH33C·CH2                       

(b) (CH2)3C+
(c) CH3CH2CH2                                    

(d) CH3 C+ H CH2CH3

NEETprep Answer

Question 12.39:
The best and latest technique for isolation, purification and separation of organic
compounds is:
(a) Crystallisation (b) Distillation (c) Sublimation (d) Chromatography

NEETprep Answer

Question 12.40:
The reaction:

                             CH3CH2l+KOH(aq)CH3CH2OH+Kl
is classified as :
(a) electrophilic substitution (b) nucleophilic substitution
(c) elimination (d) addition

 

NEETprep Answer

EXEMPLAR

1. Which of the following is the correct IUPAC name?

(a) 3-ethyl-4, 4-dimethylheptane

(b) 4, 4-dimethyl-3-ethylheptane

(c) 5-ethyl-4, 4-dimethylheptane

(d) 4, 4-bis(methyl)-3-ethylheptane

NEETprep Answer

2. The IUPAC name for  is

(a) 1-hydroxypentane-1, 4-dione

(b) 1, 4-dioxopentanol

(c) 1-carboxybutan-3-one

(d) 4-oxopentanoic acid

NEETprep Answer

3. The IUPAC name for

(a) 1-chloro-2-nitro-4-methylbenzene

(b) 1-chloro-4-methyl-2-nitrobenzene

(c) 2-chloro-1-nitro-5-methylbenezene

(d) m-nitro-p-chlorotoluene

NEETprep Answer

4. Electronegativity of carbon atoms depends upon their state of hybridisation. In which of the following compounds, the carbon maked with asterisk is most electronegative?

(a) CH3-CH2-*CH2-CH3

(b) CH3-*CH=CH-CH3

(c) CH3-CH2-C*CH

(d) CH3-CH2-CH=*CH2

NEETprep Answer

5. In which of the following, functional group isomerism is not possible?

(a) Alcohols

(b) Aldehydes

(c) Alkyl halides

(d) Cyanides

NEETprep Answer

6. The fragrance of flowers is due to the presence of some steam volatile organic compounds called essential oils. These are generally insoluble in water at room temperature but are miscible with water vapour in vapour phase. A suitable method for the extraction of these oils from the flowers is

(a) distillation

(b) crystallisation

(c) distillation under pressure

(d) steam distillation

NEETprep Answer

7. During hearing of a court case, the judge suspected that some changes in the documents had been carried out. He asked the forensic department to check the ink used at two different places. According to you which technique can give the best results?

(a) COlumn chromatography

(b) Solvent extraction

(c) Distillation

(d) Thin layer chromatography

NEETprep Answer

8. The principle involved in paper chromatography is

(a) adsorption

(b) partition

(c) solubility 

(d) volatility

NEETprep Answer

9. What is the correct order of decreasing stability of the following cations?

(a) II>I>III

(b) I>II>III

(c) II<I<III

(d) III<II<I

NEETprep Answer

10. The correct IUPAC name for  is _____.

(a) 2-ethyl-3-methylpentane

(b) 3, 4-dimethylhexane

(c) 2-sec-butylbutane

(d) 2, 3-dimethylbutane

NEETprep Answer

11. In which of the following compounds the carbon marked with asterisk is expected to have greatest positive charge?

(a) *CH3-CH2-Cl

(b) *CH3-CH2-Mg+Cl-

(c) *CH3-CH2-Br

(d) *CH3-CH2-CH3

NEETprep Answer

12. Ionic species are stabilised by the dispersal of charge. Which of the following carboxylate ion is the most stable?

(a) 

(b) 

(c) 

(d) 

NEETprep Answer

13. Electrophilic addition reactions proceed in two steps. The first step involves the addition of an electrophile. Name the type of intermediate formed in the first step of the following addition reaction.

H3C-HC=CH2+H+?

(a) 2° carbanion

(b) 1° carbocation

(c) 2° carbocation

(d) 1° carbanion

NEETprep Answer

14. Covalent bond can undergo fission in two different ways. The correct representation involving a heterolytic fission of CH3-Br is

(a) 

(b) 

(c) 

(d) 

NEETprep Answer

15. The additio of HCl to an alkene proceeds in two steps. The first step is the attack of H+ ion to  portion which can be shown as

(a) 

(b) 

(c) 

(d) All of these are possible

NEETprep Answer

16. Which of the following compounds contain all the carbon atoms in the same hybridisation state?

(a) H-CC-CC-H

(b) CH3-CC-CH3

(c) CH2=C=CH2

(d) CH2=CH-CH=CH2

NEETprep Answer

17. In which of the following representations given below spatial arrangement of group/atom is different from that given in structure 'A'?

(a) 

(b) 

(c) 

(d) 

NEETprep Answer

18. Electrophiles are electron seeking species. Which of the following groups contain only electrophiles?

(a) BF3, NH3, H2O

(b) AlCl3, SO3, NO2+

(c) NO2+. CH3+, CH3-C+=O

(d) C2H5-, C2H5, C2H5+

NEETprep Answer

For Q. 19-20 Consider the following four compounds.

(I) 

(II) 

(III) 

(IV) 

19. Which of the following pairs are position isomers?

(a) I and II

(b) II and III

(c) II and IV

(d) III and IV

NEETprep Answer

20. Which of the following pairs are not funtional group isomers?

(a) II and IV

(b) II and IV

(c) I and IV

(d) I and II

NEETprep Answer

21. Nucleophile is a species that should have

(a) a pair of electrons to donate

(b) positive charge

(c) negative charge

(d) electron deficient species

NEETprep Answer

22. Hyperconjugation involves delocalisation of _____.

(a) electrons of carbon-hydrogen σ bond of an alkyl group directly attached to an atom of unsaturated system.

(b) electrons of carbon-hydrogen σ bond of alkyl group directly attached to the positively charged carbon atom.

(c) π-electrons of carbon-carbon bond

(d) lone pair of electrons.

NEETprep Answer

For Q. 23 to 26 Conside structures I to VII.

I. CH3-CH2-CH2-CH2-OH

II. 

III. 

IV. 

V. CH3-CH2-O-CH2-CH3

VI. CH3-O-CH2-CH2-CH3

VII. 

23. Which of the above compounds form pairs of metamers?

NEETprep Answer

24. Identify the pairs of compounds which are funtional group isomers.

NEETprep Answer

25. Identify the pairs of compounds that represents position isomerism.

NEETprep Answer

26. Identify the pairs of compounds that represents chain isomerism.

NEETprep Answer

27. For testing halogens in an organic compound with AgNO3 solution, sodium extract (Lassaigne's test) is acidified with dilute HNO3. What will happen if a student acidifies the extract with dilute H2SO4 in place of dilute HNO3?

NEETprep Answer

28. What is the hybridisation of each carbon in H2C=C=CH2?

NEETprep Answer

29. Explain, how is the electronegativity of carbon atoms is related to their state of hybridisation in an organic compound?

NEETprep Answer

30. Show the polarisation of carbon-magnesium bond in the following structure.

CH3-CH2-CH2-CH2-Mg-X

NEETprep Answer

31. Compounds with same molecular formula but differing int heir structures are said to be structural isomers. What type of strucutral isomerism is shown by

CH3-S-CH2-CH2-CH3 and 

NEETprep Answer

32. Which of the following selected chains is correct to name the given compound accordig to IUPAC system?

NEETprep Answer

33. In DNA and RNA, nitrogen atom is present in the ring system. Can Kjeldahl method be used for the estimation of nitrogen present in these? Give reasons.

NEETprep Answer

34. If a liquid compound decomposes at its boiling point, which method(s) can you choose for its purification. It is known that the compound is stable at low pressure, steam volatile and insoluble in water.

NEETprep Answer

35. Draw the possible resonance structures for  and predict which of the structures is more stable. Give reason for your answer.

NEETprep Answer

36. Which of the following ions is more stable? Use resonance to explain your answer.

NEETprep Answer

37. The structure of triphenylmethyl cation is given below. This is very stable and some of its salts can be stored for months. Explain the cause.

NEETprep Answer

38. Write the strucutres of various carbocations that can be obtained from 2-methylbutane. Arrange these carbocations in order of increasing stability.

NEETprep Answer

39. Three students, Manish, Ramesh and Rajni were determining the extra elements present in an organic compound given by thei teacher. They prepared the Lassaigne's extract (L.E.) independently by the fusion of the compound with sodium metal. Then they added solid FeSO4 and dilute sulphuric acid to a part of Lassaigne's extract. Manish and Rajni obtained prussian blue colour but Ramesh got red colour.

Ramesh repeated the test with the same Lassaigne's extract, but again got red colour only. They were surprised and went to their teacher and told him about their observation. Teacher asked them to think over the reason for this. Can you help them by giving the reason for this observation. Also, write the chemical equations to explain the formation of compounds of different colours.

NEETprep Answer

40. Name the compounds whose line formulae are given below.

(a) 

(b) 

NEETprep Answer

41. Write the strucutral formulae for compounds named as

(a) 1-bromoheptane

(b) 5-bromoheptanoic acid

NEETprep Answer

42. Draw the resonance structures of the following compounds.

(a) 

(b) CH2=CH-CH=CH2

(c) 

NEETprep Answer

43. Identify the most stable species in the following set of ions giving reasons

(a) C+H3, C+H2Br, C+HBr2, C+Br3

(b) CH3, CH2Cl, CHCl2, CCl3

NEETprep Answer

44. Give three points of differences between inductive effect and resonance effect.

NEETprep Answer

45. Which of the following compounds will not exist as resonance hybrid. Give reason for your answer.

(a) CH3OH

(b) R-CONH2

(c) CH3CH=CHCH2NH2

NEETprep Answer

46. Why does SO3 act as an electrophile?

NEETprep Answer

47. Resonance structures of propenal are given below. Which of these resonating structures is more stable? GIve reason for your answer.

CH2=CH-CH=OICH2-CH=CH-OII

NEETprep Answer

48. By mistake, an alcohol (boiling point 97°C) was mixed with a hydrocarbon (boiling point 68°C). Suggest a suitable method to separate the two compounds. Explain the reason for your choice.

NEETprep Answer

49. Which of the two structures (A) and (B) given below is more stabilised by resonance. Explain

CH3COOH(A) and CH3COO(B)

NEETprep Answer

50. Match the type of mixture of compounds in Column I with the technique of separation/purification given in column II.

Column I

Column II

A. Two solids which have different solubilities in a solvent and which do not undergo reaction when dissolved in it

1. Stead distillation

B. Liquid that decomposes at its boiling point

2. Fractional distillation

C. Steam volatile liquid

3. Simple distillation

D. Two liquids which have boiling points close to each other

4. Distillation under reduced pressure

E. Two liquids with large difference in boiling points.

5. Crystallisation

NEETprep Answer

51. Match the terms mentioned in Column I with the terms in Column II.

Column I

Column II

A. Carbocation

1. Cyclohexane and 1-hexene

B. Nucleophile

2. Conjugation of electrons of C-Hσ bond with empty p-orbital present at adjacent positively charged carbon

C. Hyperconjugation

3. sp2 hybridised carbon with empty p-orbital

D. Isomers

4. Ethyne

E. sp-hybridisation

5. Species that can receive a pair of electrons

F. Electrophile

6. Species that can supply a pair of electrons.

NEETprep Answer

52. Match Column I with Column II.

Column I

Column II

A. Dumas method

1. AgNO3

B. Kjeldahl’s method

2. Silica gel

C. Carius method

3. Nitrogen gel

D. Chromatography

4. Free radicals

E. Homolysis

5. Ammonium sulphate

NEETprep Answer

53. Match the intermediates given in Column I with their probable structure in Column II.

Column I

Column II

A. Free radical

1. Trigonal planar

B. Carbocation

2. Pyramidal

C. Carbanion

3. Linear

NEETprep Answer

54. Match the ions given in Column I with their nature given in Column II.

Column I

Column II

A. 

1. Stable due to resonance

B. F3-C+

2. Destabilised due to inductive effect

C. 

3. Stabilised by hyperconjugation.

D. CH3-CH-CH3

4. A secondary carbocation

NEETprep Answer

55. Assertion (A) Simple distillation can help in separating a mixture of propan-1-ol (boiling point 97°C) and propanon (boiling point 56°C).

Reason (R) Liquids with a difference of more than 20°C in their boiling points can be separated by simple distillation.

(a) Both A and R are correct and R is the correct explanation of A

(b) Both A and R are correct but R is not the correct explanation of A

(c) Both A and R are not correct

(d) A is not correct but R is correct

NEETprep Answer

56. Assertion (A) Energy of resonance hybrid is equal to the average of energies of all canonical forms.

Reason (R) Resonance hybrid cannot be presented by a single structure.

(a) Both A and R are correct and R is the correct explanation of A

(b) Both A and R are correct but R is not the correct explanation of A

(c) Both A and R are not correct

(d) A is not correct but R is correct

NEETprep Answer

57. Assertion (A) Pent-1-ebe abd pent-2-ene are position isomers.

Reason (R) Position isomers differ in the position of functional group or a substituent.

(a) Both A and R are correct and R is the correct explanation of A

(b) Both A and R are correct but R is not the correct explanation of A

(c) Both A and R are not correct

(d) A is not correct but R is correct

NEETprep Answer

58. Assertion (A) All the carbon atoms in H2C=C=CH2 are sp2-hybridised.

Reason (R) In this molecule all the carbon atoms are attached to each other by double bonds.

(a) Both A and R are correct and R is the correct explanation of A

(b) Both A and R are correct but R is not the correct explanation of A

(c) Both A and R are not correct

(d) A is not correct but R is correct

NEETprep Answer

59. Assertion (A) Sulphur present in an organic compound can be estimated quantitatively by Carius method.

Reason (R) Sulphur is separated easily from other atoms in the molecule and gets precipitated as light yellow solid.

(a) Both A and R are correct and R is the correct explanation of A

(b) Both A and R are correct but R is not the correct explanation of A

(c) Both A and R are not correct

(d) A is not correct but R is correct

NEETprep Answer

60. Assertion (A) Components of a mixture of red and blue inks can be separated by distributing the components between stationary and mobile phases in paper chromatography.

Reason (R) The coloured components of inks migrate at different rates because paper selectively retains different components according to the difference int heir partition between the two phases.

(a) Both A and R are correct and R is the correct explanation of A

(b) Both A and R are correct but R is not the correct explanation of A

(c) Both A and R are not correct

(d) A is not correct but R is correct

NEETprep Answer

61. What is meant by hybridisation? Compound CH2=C=CH2 contains sp or sp2-hybridised carbon atoms. Will it be a planar molecule?

NEETprep Answer

62. Benzoic acid is an organc compound. Its crude sample can be purified by crystallisation from hot water. What characteristic differences in the properties of benzoic acid and the impurity make this process of purification suitable?

NEETprep Answer

63. Two liquids (A) and (B) can be separated by the method of fractional distillation. The boiling points of liquid (A) is less than boiling point of liquid (B). Which of the liquids do you expect to come out first in the distillate? Explain.

NEETprep Answer

64. You have a mixture of three liquids A, B and C. There is a large difference in the boiling points of A and rest of the two liquids i.e., B and C. Boiling point of liquids B and C are quite close. Liquid A boils at a higher temperature than B and C and boiling point B is lower than C. How will you separate the components of the mixture. Draw a diagram showing set up of the apparatus for the process.

NEETprep Answer

65. Draw a diagram of bubble plate type fractionating column. When do we require such type of column for separating two liquids. Explain the principle involved in the separation of components of a mixture of liquids by using fractionating column. What industrial applicaitons does it process have?

NEETprep Answer

66. A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification. Explain how is it possible?

NEETprep Answer