The Poisson's ratio of a material is \(0.4.\) If a force is applied to a wire of this material, there is a decrease in the cross-section area by \(2\)%. In such a case the percentage increase in its length will be:

1. \(3\)% 2. \(2.5\)%
3. \(1\)% 4. \(0.5\)%

Subtopic:  Poisson's Ratio |
 63%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The breaking stress of a wire going over a smooth pulley in the following question is 2 × 109 N/m2. What would be the minimum radius of the wire used if it is not to break?

    

1. \(0.46\times10^{-6}m\) 2. \(0.46\times10^{-4}m\)
3. \(0.46\times10^{8}m\) 4. \(0.46\times10^{-11}m\)

Subtopic:  Stress - Strain |
 72%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A metallic rope of diameter \(1~ \text{mm}\) breaks at \(10 ~\text{N}\) force. If the wire of the same material has a diameter of \(2~\text{mm}\), then the breaking force is:

1. \(2.5~\text{N}\)  2. \(5~\text{N}\) 
3. \(20~\text{N}\)  4. \(40~\text{N}\) 

Subtopic:  Young's modulus |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Two wires \(X\) and \(Y\) of the same length are made of the same material. The figure represents the load \(F\) versus extension \(\Delta x\) graph for the two wires. Hence:

    

1. Modulus of elasticity of \(Y\) is greater than that of \(X\).
2. Stiffness of \(Y\) is more than that of \(X\).
3. The cross-sectional area of \(Y\) is less than that of \(X\).
4. All of these

Subtopic:  Stress - Strain Curve |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The Young's modulus of a wire is numerically equal to the stress at a point when:

1. the strain produced in the wire is equal to unity.
2. the length of the wire gets doubled.
3. the length increases by 100%.
4. All of these

Subtopic:  Young's modulus |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The stress-strain curve for two materials A and B are as shown in the figure. Select the correct statement:

       
 

1. Material A is less brittle and less elastic as compared to B
2. Material A is more ductile and less elastic as compared to B
3. Material A is less brittle and more elastic than B
4. Material B is more brittle and more elastic than A

Subtopic:  Stress - Strain Curve |
 67%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The elongation (x) of a steel wire varies with the elongating force (F) according to the graph: (within elastic limit)

1. 2.
3. 4.
Subtopic:  Stress - Strain Curve |
 66%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform wire is held at one end and stretched by applying force at the other end. If the product of the length of wire and area of cross-section of the wire remains unchanged, then Poisson's ratio of material of the wire will be:

1. 0 2. 0.50
3. -0.5 4. Infinity

Subtopic:  Poisson's Ratio |
 60%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform wire of length \(3\) m and mass \(10\) kg is suspended vertically from one end and loaded at another end by a block of mass \(10\) kg. The radius of the cross-section of the wire is \(0.1\) m. The stress in the middle of the wire is: (Take \(g=10\) ms-2)

1. \(1.4 \times10^4\) N/m2 2. \(4.8 \times10^3\) N/m2
3. \(96 \times10^4\) N/m2 4. \(3.5\times10^3\) N/m2
Subtopic:  Stress - Strain |
 66%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The increase in the length of a wire on stretching is \(0.04\)%. If Poisson's ratio for the material of wire is \(0.5,\) then the diameter of the wire will:

1. decrease by \(0.02\)%. 2. decrease by \(0.01\)%.
3. decrease by \(0.04\)%. 4. increase by \(0.03\)%.
Subtopic:  Poisson's Ratio |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh