When a disc rotates with uniform angular velocity, which of the following is not true?

1. the sense of rotation remains the same.
2. the orientation of the axis of rotation remains the same.
3. the speed of rotation is non-zero and remains the same.
4. the angular acceleration is non-zero and remains the same.

Subtopic:  Rotational Motion: Kinematics |
 68%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform square plate has a small piece \(Q\) of an irregular shape removed and glued to the center of the plate leaving a hole behind in the figure. The moment of inertia about the \(\mathrm{z}\)-axis is then,

    

1. increased
2. decreased
3. the same
4. changed in manner

Subtopic:  Moment of Inertia |
 65%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform square plate has a small piece Q of an irregular shape removed and glued to the center of the plate leaving a hole behind in the figure. The CM of the plate is now in the following quadrant of the x-y plane. 

1. I

2. II

3. III

4. IV

Subtopic:  Center of Mass |
 69%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The density of a non-uniform rod of length 1m is given by ρ(x)=a(1+bx2) where, a, and b are constants and 0x1. The centre of mass of the rod will be at

1. \(\frac{3(2+b)}{4(3+b)}\)
2. \(\frac{4(2+b)}{3(3+b)}\)
3. \(\frac{3(3+b)}{4(2+b)}\)
4. \(\frac{4(3+b)}{3(2+b)}\)

Subtopic:  Center of Mass |
 60%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A merry-go-round, made of a ring-like platform of radius \(R\) and mass \(M,\) is revolving with the angular speed ω. A person of mass \(M\) is standing on its edge. At one instant, the person jumps off the round such that the final speed of the person is zero. What is the final angular velocity of the merry-go-round?
1. \(2\omega\)
2. \(\omega\)
3. \(\omega/2\)
4. \(0\)

Subtopic:  Angular Momentum |
 61%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The following are the given statements:
a. for a general rotational motion, angular momentum \(L\) and angular velocity \(\omega\) need not be parallel.
b. for a rotational motion about a fixed axis, angular momentum \(L\) and angular velocity \(\omega\) are always parallel.
c. for a general translational motion, momentum \(p\) and velocity \(v\) are always parallel.
d. for a general translational motion, acceleration \(a\) and velocity \(v\) are always parallel.
Choose the correct option:
1. (a), (c)
2. (b), (c)
3. (c), (d)
4. (a), (b), (c)
Subtopic:  Angular Momentum |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The figure below shows two identical particles 1 and 2, each of mass \(m,\) moving in opposite directions with the same speed \(v\) along parallel lines. At a particular instant, \(r_1\) and \(r_2\) are their respective position vectors drawn from point A, which is in the plane of the parallel lines.

      
Consider the following statements.

a. angular momentum \(l_1\) of particle 1 about A is \(l_1=mv(d_1)\)
b. angular momentum \(l_1\)  of particle 2 about A is \(l_1=mv(r_2)\)
c. total angular momentum of the system about A is \(l=mv(r_1+r_2)\)
d. total angular momentum of the system about A is  \(l=mv(d_2-d_1)\)

Choose the correct option:

1. (a, c)
2. (a, d)
3. (b, d)
4. (b, c)
Subtopic:  Angular Momentum |
 70%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The net external torque on a system of particles about an axis is zero. Which of the following are compatible with it?

a. The forces may be acting radially from a point on the axis.
b. The forces may be acting on the axis of rotation.
c. The forces may be acting parallel to the axis of rotation.
d. The torque caused by some forces may be equal and opposite to that caused by other forces.

Choose the correct option.
1. (a, c, d)
2. (a, b, d)
3. (a, b, c, d)
4. (b, c, d)

Subtopic:  Torque |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The figure shows a lamina in XY-plane. Two axes z and z' pass perpendicular to its plane. A force \(\vec{F}\) acts in the plane of the lamina at point P as shown. (The point P is closer to the z'-axis than the z-axis.)

   

a. torque \(\vec{\tau}\) caused by \(\vec{F}\) about z-axis is along - \(\hat{k}\)
b. torque \(\vec{\tau}'\) caused by \(\vec{F}\) about z'-axis is along - \(\hat{k}\)
c. torque caused by \(\vec{F}\) about the z-axis is greater in magnitude than that about the z'-axis
d. total torque is given by \(\vec{\tau}_{net}=\vec{\tau}+\vec{\tau}'\)

Choose the correct option:
1. (c, d)
2. (a, c)
3. (b, c)
4. (a, b)

Subtopic:  Torque |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform cube of mass \(m\) and side \(a\) is placed on a frictionless horizontal surface. A vertical force \(F\) is applied to the edge as shown in the figure. Match the following (most appropriate choice).

      

List- I List- II
(a) \(mg/4<F<mg/2\) (i) cube will move up.
(b) \(F>mg/2\) (ii) cube will not exhibit motion.
(c) \(F>mg\) (iii) cube will begin to rotate and slip at A.
(d) \(F=mg/4\) (iv) normal reaction effectively at \(a/3\) from A, no motion.
 
1. a - (i), b - (iv), c - (ii), d - (iii)
2. a - (ii), b - (iii), c - (i), d - (iv)
3. a - (iii), b - (i), c - (ii), d - (iv)
4. a - (i), b - (ii), c - (iv), d - (iii)
Subtopic:  Torque |
 75%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh