What are the characteristics of the crystals obtained after crystallization during the synthesis of acetanilide from aniline​​​​​​?

1. Yellow and irregularly shaped
2. White and needle-shaped
3. Blue and spherical
4. Red and cubic

Subtopic:  Detection of the functional groups |
 57%
Level 3: 35%-60%
Please attempt this question first.
Hints

What is observed visually when ammonium hydroxide and hydrochloric acid react?
1. Red coloration 2. White fumes
3. Blue precipitate 4. No visible change
Subtopic:  Detection of Anions |
 89%
Level 1: 80%+
Hints

Mark the correct representation of the compound that is formed when \(\mathrm{AgCl}\)  reacts with ammonia:
1. \(\left[\mathrm{Ag}\left(\mathrm{NH}_3\right)_2\right] \mathrm{Cl} \text { }\) 2. \(\left[\mathrm{Ag}\left(\mathrm{NH}_4\right)_2\right] \mathrm{Cl} \text { }\)
3. \(\left[\mathrm{Ag}\left(\mathrm{NH}_2\right)_2\right] \mathrm{} \text {Cl }\) 4. AgNO3
Subtopic:  Detection of Anions |
 75%
Level 2: 60%+
Hints

advertisementadvertisement

Which solvent is used to dissolve the mixture of o-nitroacetanilide and p-nitroacetanilide for separation?

1. Water
2. Ethanol
3. Acetone
4. Hexane
Subtopic:  Preparation of the Organic and Inorganic compounds |
 51%
Level 3: 35%-60%
Hints

In the presence of zinc, what chemical process is hindered during the reaction involving aniline?
1. Reduction 2. Oxidation
3. Hydrolysis 4. Polymerization
Subtopic:  Preparation of the Organic and Inorganic compounds |
 59%
Level 3: 35%-60%
Hints

What is the primary reason for using a reflux condenser in organic chemistry experiments?
1. To accelerate the reaction rate
2. To maintain a constant temperature
3. To minimize contamination
4. To prevent evaporation of reactants or solvents
Subtopic:  Preparation of the Organic and Inorganic compounds |
 61%
Level 2: 60%+
Hints

advertisementadvertisement

What is the ratio of aniline and glacial acetic acid used to synthesize acetanilide from aniline?

1. 2:6
2. 1:5
3. 2:3
4. 1:1
Subtopic:  Preparation of the Organic and Inorganic compounds |
 62%
Level 2: 60%+
Hints

Mark the reaction that is incorrect regarding the confirmatory test for acetate ion:
 
1. 
2. 
3. 
4. 
Subtopic:  Detection of the functional groups |
Level 3: 35%-60%
Hints

A salt gives MnO2 , a light greenish-yellow pungent gas and effervescence on heating with conc. \(\mathrm{H}_2 \mathrm{SO}_4\):

This indicates the ions present in the salt are:
1. \(\mathrm{I^{-}ions.} \)
2. \(\mathrm{Br^{-}ions.} \)
3. \(\mathrm{Cl^{-}ions.} \)
4. \(\mathrm{S^{2-}ions.} \)
Subtopic:  Detection of Anions |
 68%
Level 2: 60%+
Hints

advertisementadvertisement

The correct representation of A and B in the following reaction are:
\(\small 4\mathrm{NaCl}+{\mathrm K}_2{\mathrm{Cr}}_2{\mathrm O}_7+6{\mathrm H}_2{\mathrm{SO}}_4\longrightarrow2{\mathrm{KHSO}}_4+\underset{\begin{array}{c}\text{ (Chromyl }\\\text{ chloride) }\end{array}}{\mathbf A}\\\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\;\small +4{\mathrm{NaHSO}}_4+3{\mathrm H}_2\mathrm O\)
\(\small\begin{aligned} & \left(\mathrm{CH}_3 \mathrm{COO}\right)_2 \mathrm{~Pb}+\underset{\begin{array}{c} \text { Sodium} \\ \text { chromate } \end{array}}{\mathrm{Na_2CrO_4}} \longrightarrow \underset{\begin{array}{c} \text { Lead chromate} \\ \text {(Yellow precipitate)} \end{array}}{\mathbf{B}}+~~2 \mathrm{CH}_3 \mathrm{COONa} \\ \end{aligned}\\ \)
 
1. CrO3 and PbCrO4 2. CrO2Cl2 and PbCrO4
3. Cr2O7 and Pb CrO4 4. Cr2O7 and PbCl2
Subtopic:  Detection of Anions |
 91%
Level 1: 80%+
Hints