If dimensions of critical velocity \({v_c}\) of a liquid flowing through a tube are expressed as \(\eta^{x}\rho^yr^{z}\), where \(\eta, \rho~\text{and}~r\) are the coefficient of viscosity of the liquid, the density of the liquid, and the radius of the tube respectively, then the values of \({x},\) \({y},\) and \({z},\) respectively, will be:

1.	\(1,-1,-1\)	2.	\(-1,-1,1\)
3.	\(-1,-1,-1\)	4.	\(1,1,1\)

If force (\(F\)), velocity (\(\mathrm{v}\)), and time (\(T\)) are taken as fundamental units, the dimensions of mass will be:

The dimensions of ${\left({\mathrm{\mu }}_0{\mathrm{\epsilon }}_0\right)}^{-1/2}$ are:

1.  $\left[{\mathrm{L}}^{-1}\right]$ $\mathrm{T}$

2.  $\left[{\mathrm{LT}}^{-1}\right]$

3.  $\left[{\mathrm{L}}^{-1/2}\right]$ ${\mathrm{T}}^{1/2}$

4.  $\left[{\mathrm{L}}^{-1/2}\right]$ ${\mathrm{T}}^{-1/2}$

The dimensions of $\frac{1}{2}{\mathrm{\epsilon }}_0{\mathrm{E}}^2$ where ${\epsilon }_0$ is the permittivity of free space and E is the electric field, are:

1. [ML²T^-2]

2. [ML^-1T^-2]

3.  [ML²T^-1]

4.  [MLT^-1]

If the error in the measurement of the radius of a sphere is 2%, then the error in the determination of the volume of the sphere will be:

1. 4%

2. 6%

3. 8%

4. 2%

Dimensions of resistance in an electrical circuit, in terms of dimension of mass M, length L, time T, and current I, would be:

1. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-3}{\mathrm{I}}^{-1}\right]$

2. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-2}\right]$

3. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-1}{\mathrm{I}}^{-1}\right]$

4. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-3}{\mathrm{I}}^{-2}\right]$