The peak voltage in the output of a half-wave diode rectifier fed with a sinusoidal signal without filter is 10 V. The dc component of the output voltage is 
(1)10/2  V                                   

(2) 10/π V

(3) 10 V                                           

(4) 20/π V

Subtopic:  Rectifier |
 56%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A transistor is used as an amplifier in CB mode with a load resistance of 5 kΩ. The current gain of the amplifier is 0.98 and the input resistance is 70 Ω, the voltage gain and power gain respectively are :
(1) 70, 68.6                         

(2) 80, 75.6

(3) 60, 66.6                         

(4) 90, 96.6

Subtopic:  Applications of Transistor (OLD NCERT) |
 79%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In the following circuits PN-junction diodes D1D2 and D3 are ideal for the following potential of A and B, the correct increasing order of resistance between A and B will be

(i) – 10 V, – 5V           (ii) – 5V, – 10 V
(iii) – 4V, – 12V

(a) (i) < (ii) < (iii)                       (b) (iii) < (ii) < (i)
(c) (ii) = (iii) < (i)                       (d) (i) = (iii) < (ii)

Subtopic:  Applications of PN junction |
 63%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The circuit shown in the following figure contains two diode D1 and D2 each with a forward resistance of 50 ohms and with infinite backward resistance. If the battery voltage is 6 V, the current through the 100 ohm resistance (in amperes) is

1.  Zero 
2.  0.02
3.  0.03 
4.  0.036

Subtopic:  PN junction |
 80%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The contribution in the total current flowing through a semiconductor due to electrons and holes are 34 and 14 respectively. If the drift velocity of electrons is 52 times that of holes at this temperature, then the ratio of concentration of electrons and holes is
1. 6 : 5                 

2. 5 : 6

3. 3 : 2                 

4. 2 : 3

Subtopic:  Types of Semiconductors |
 67%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Ge and Si diodes conduct at 0.3 V and 0.7 V respectively. In the following figure if Ge diode connection are reversed, the valve of V0 changes by 

(1) 0.2 V                   

(2) 0.4 V

(3) 0.6 V                   

(4) 0.8 V

Subtopic:  PN junction |
 69%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

In the following circuit, find I1 and I2.

(a) 0, 0
(b) 5 mA, 5 mA
(c) 5 mA, 0
(d) 0, 5 mA

Subtopic:  Applications of PN junction |
 53%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

For the transistor circuit shown below, if β = 100, the voltage drop between emitter and base is 0.7 V, then the value of VCE will be:
                  
1. 10 V
2. 5 V
3. 13 V
4. 0 V

Subtopic:  Applications of Transistor (OLD NCERT) |
 63%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The following configuration of gate is equivalent to

1. NAND
2. XOR
3. OR
4. None of these

Subtopic:  Logic gates |
 77%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

Figure gives a system of logic gates. From the study of truth table it can be found that to produce a high output (1) at R, we must have

(1) X = 0, Y = 1

(2) X = 1, Y = 1

(3) X = 1, Y = 0

(4) X = 0, Y = 0

Subtopic:  Logic gates |
 67%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh