A metal bar of length \(L\) and area of cross-section \(A\) is clamped between two rigid supports. For the material of the rod, its Young’s modulus is \(Y\) and the coefficient of linear expansion is \(\alpha\). If the temperature of the rod is increased by \(\Delta t^{\circ} \mathrm{C}\), the force exerted by the rod on the supports will be:
1. \(YAL\Delta t\)
2. \(YA\alpha\Delta t\)
3. \(\frac{YL\alpha\Delta t}{A}\)
4. \(Y\alpha AL\Delta t\)

Subtopic:  Thermal Stress |
 81%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The pressure applied from all directions on a cube is P. How much its temperature should be raised to maintain the original volume ? The volume elasticity of the cube is  β and the coefficient of volume expansion is α -

(1) Pαβ                                 

(2) Pαβ

(3) Pβα                                 

(4) αβP

 

Subtopic:  Thermal Expansion |
 66%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Under steady state, the temperature of a body 

(1) Increases with time

(2) Decreases with time

(3) Does not change with time and is same at all the points of the body

(4) Does not change with time but is different at different points of the body

Subtopic:  Conduction |
 54%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The coefficient of thermal conductivity depends upon

(1) Temperature difference of two surfaces

(2) Area of the plate

(3) Thickness of the plate

(4) Material of the plate

Subtopic:  Conduction |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

When two ends of a rod wrapped with cotton are maintained at different temperatures and, after some time, every point of the rod attains a constant temperature, then:

1. Conduction of heat at different points of the rod stops because the temperature is not increasing
2. The rod is a bad conductor of heat
3. Heat is being radiated from each point of the rod
4. Each point of the rod is giving heat to its neighbour at the same rate at which it is receiving heat



 

Subtopic:  Conduction |
 75%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The ratio of thermal conductivity of two rods of different material is 5 : 4. The two rods of same area of cross-section and same thermal resistance will have the lengths in the ratio 

(1) 4 : 5             

(2) 9 : 1

(3) 1 : 9             

(4) 5 : 4

Subtopic:  Conduction |
 72%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

In variable state, the rate of flow of heat is controlled by
(1) Density of material               

(2) Specific heat

(3) Thermal conductivity             

(4) All the above factors

Subtopic:  Conduction |
 70%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

The dimensions of thermal resistance are
(1) M-1L-2T3K           

(2) ML2T-2K-1

(3) ML2T-3K               

(4) ML2T-2K-2

Subtopic:  Conduction |
 64%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Two walls of thicknesses d1 and d2 and thermal conductivities k1 and k2 are in contact. In the steady state, if the temperatures at the outer surfaces  are T1 and T2, the temperature at the common wall is  -

(1) k1T1d2+k2T2d1k1d2+k2d1                     

(2)k1T1+k2d2d1+d2

(3) k1d1+k2d2T1+T2T1T2                   

(4) k1d1T1+k2d2T2k1d1+k2d2

Subtopic:  Conduction |
 65%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A slab consists of two parallel layers of copper and brass of the same thickness and having thermal conductivities in the ratio 1 : 4. If the free face of brass is at 100°C and that of copper at 0°C, the temperature of interface is
1. 80°C               

2. 20°C

3. 60°C               

4. 40°C

Subtopic:  Conduction |
 56%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh